See menu at left for other types of I/O cards.
If you entered the site on this page, and there is no menu, click here

PCI Bus cards are listed first,      ISA bus cards are listed further down the page,

Warranty period for Advantech cards: 2 years.

Wiring boards, signal conditioning, amplifier & relay daughter boards are available for many of these cards.
See menu at left, if there is no menu, Wiring Boards: click here.

For higher performance US made cards: click here (link to Data Translation)

Software supplied with cards:
PCLS-DLL-DIO Windows Drivers for Win95 & NT

WaveScan 2
Wavescan is a real-time waveform display utility capable of displaying on the screen and storing the incoming data into users’ HDD.
In the Version 2.0, moreover, Wavescan extend its support list to all our PCI cards.
The ActiveDAQ-based design concept gives more fexibility to the users by designing their own Wavescan edition.
See  Software (for Advantech hardware only) (opens new Tab or Window)

Other Software for Dig I/O Cards:

PCLS-NI-DIO Labview Drivers

16-bit for PCL-720/722/724/727/728/731/733/734/830
32-bit Labview 4.1 drivers for Win95/NT, for PCL cards, ADAM-4000, 5000/485,    provided free of charge.

Some Advantech items are RoHS Compliant: PCL-731-AE

RoHS - Restriction of Hazardous Substances
             Info        List of Advantech RoHS Compliant Products    

     Search the Advantech web site

Note about installing the drivers for cards and devices under Windows

It is best to install the driver software before you install the actual hardware

1. Reboot the computer
2. Install the driver.
3. Insert the card into the PCI bus
4. Power on and take note of the i/o and interupt the PnP bios gives the card.
5. Boot into Windows and let the cards detect and let Windows search for the driver.

If you installed the card before installing the drivers:

1. Uninstall the driver, power off, remove the card.
2. Reboot, reinstall the driver.
3. Reinsert the card into the PCI bus, but in a different slot
4. Power on and take note of the i/o and interupt the PnP bios gives the card.
5. Boot into Windows and let the cards detect and let Windows search for the driver.

PCI Bus Cards - Plug and Play

These use a PCI controller. All bus relevant configurations, e.g. base address & interrupt assignment are automatically controlled by the software. No jumper or DIP switch configuration is required.

M17053    PCI 8255 - 8253 I/O Card - PCI bus

The PCI bus 8255-8253 I/O Card provides 48 I/O lines & 3 counters:
6 digital I/O ports, each port containing 8 I/O lines
Decision Computer
It provides a maximum of 10MHz count rate and programmable I/O control functions.

• 32 bit PCI bus with PnP features
• Programmable I/O control functions
• Up to 48 I/O lines
• Provides DII (Decision Industrial Interface) device driver for PnP features
• Three independent 16 bits counters
• Maximum of 10MHz counter rate
• Supports several operating modes that are programmable
• Port address selectable
• Suitable for Windows 95/98/NT
• Diagnostic Test programs provided in Basic, Pascal and C
• Dip switch to identify 8255 adapter (set different numbers if more than one adapter insatalled)
• 16 LEDs

User manual contains data for the chips as well as for the board. M17053: $240+GST

M3067:  8255 - 8253 Terminator board for M17053 above
Includes two ribbon cables, 64 screw terminals and power LED.
                                  M3067:  8255 - 8253 Terminator board: $180+GST

M17075   4 Ch Opto Digital Input, and 4 Ch Relay Output - PCI bus

A PCI interface card that features 4 opto isolated digital input channels 17 - 28 volt DC or TTL input.
4 reed relays are also included on the card contact rating of 120V AC 1A, with an isolation resistance of 100M Ohm.
Life expectancy is 100 million operations at signal level load. Decision.   Data: click here.   M17075: $310+GST

M17074   8 Ch Opto Digital Input, 8 Ch Relay Output - PCI bus

A PCI interface card that features 8 opto isolated digital input channels with an operation level of 17 - 28 volt DC or TTL input range. 8 reed relays are also included on the card and have a contact rating of 120V AC 1A, with an isolation resistance of 100M Ohm. Life expectancy is 100 million operations at signal level load.
Available in either 4 or 8 port, this device allows your computer to either control external devices or receive input.
This might be information from PIR sensors, pressure mats or
even the simple window sensors. Similarly these cards could be used to control gate/door locks, camera servos, or even major industrial or domestic appliance via relays, etc. Decision.  Data: click here.    M17074: $370+GST

Advantech PCI Bus Digital I/O Cards

PCI-1730-A    32-channel IsolatedDigital I/O Card $262+GST      7/06
PCI-1730-AE  32ch Isolated Digital I/O Card w/32ch TTL DIO $262
PCI-1733-A     32-channel IsolatedDigital Input Card $262
PCI-1733-AE  32ch Isolated Digital Input Card $262
PCI-1734-A     32-channel IsolatedDigital Output Card $262
PCI-1734-AE   32-ch Isolated Digital Output Card $262
PCI-1735U-A   64ch TTL Digital I/O Card w/Counter $273
PCI-1736UP-A 32-ch Iso-DI/O Low Profile Card $295
PCI-1737U-A   24ch TTL Digital I/O Card $172
PCI-1739U-A   48ch TTL Digital I/O Card $245
PCI-1741S-A    PCI-1741U with cable and PCLD-8710 $898
PCI-1741U-A   200kS/s, 16-bit,Low-cost Multifunction Card $752
PCI-1742U-A   16-bit, 1MS/s Multifunction Card $1,117
PCI-1747U-A   250K 16-bit 64-ch AI card $1,138

PCI-1750-A      32ch. Isolated DI/O Card For PCI Bus $268+GST      7/06
PCI-1750-AE    32ch Isolated Digital I/O Card w/Counter $268
PCI-1751-A      48-Bit DI/O Card For PCIBus $217
PCI-1751U-A   48-Bit DI/O Card For PCIBus $245
PCI-1752-A         64-Channel DigitalOutput Card $334
PCI-1752U-A      64ch Isolated Digital Output Card (Sink) $334
PCI-1752USO-A 64ch Isolated Digital Output Card (Source) $334
PCI-1753-B        96-BIT Digital I/O CARD $306
PCI-1753E-B     96-BIT Digital I/O EXTENSION CARD FOR P $250
PCI-1754-A        64-Channel Isolated Digital Input Card $334
PCI-1754-AE      64ch Isolated Digital Input Card $334
PCI-1755-A        80 MB/s Ultra-speed 32-ch Digital I/O Card $875
PCI-1756-A        64-Channel Isolated Digital I/O Card $358
PCI-1756-AE      64ch Isolated Digital I/O Card $358
PCI-1757UP-A    24-ch DI/O Low Profile PCI Card $200
PCI-1758UDI-A 128-ch Isolated Digital Input card $725
PCI-1758UDIO-A  64-ch Isolated DI & 64-CH Isolated DO C $747
PCI-1758UDO-A  128-ch Isolated DigitalOutput card $768

PCI-1760U-A1 8-ch Relay & 8-ch IDI Universal PCI Card $374+GST      7/06
PCI-1760U-AE 8-ch Relay & 8-ch IDI Universal PCI Card $374
PCI-1761-A      8-ch Relay Actuator and 8-ch Isolated D/I Card $186
PCI-1761-AE   8ch Relay & 8ch Isolated DI Card $186
PCI-1762-A     16-ch IDI and 16-chRelay Output Card $333
PCI-1762-AE   16ch Relay & 16ch Isolated DI Card $333
PCI-1763UP-A  8-ch Relay & 8 Iso-DI Low Profile Card $333
PCI-1780-A      8-channel Counter/Timer Card $412
PCI-1784-A     4-axis Quadrature Encoder and Counter Card $580

  Data on Advantech I/O cards, PCI bus: click here        Search the Advantech web site

Items whose part number ends with AE or BE are RoHS Compliant

RoHS - Restriction of Hazardous Substances   Info   List of Advantech RoHS Compliant Products  

PCI-1730    32-channel Isolated Digital I/O Card

32 isolated DIO channels (16 inputs and 16 outputs)
32 TTL-level DIO channels (16 inputs and 16 outputs)
High output driving capacity
High-voltage isolation on isolated I/O channels (2,500 VDC)
Interrupt capability
Two 20-pin connectors for isolated digital I/O channels and two for TTL digital I/O channels
D-type connector 37-pin, for isolated input and output channels

PCI-1733   32-channel Isolated Digital Input Card

32 isolated, bidirectional digital input channels
High-voltage isolation (2,500 VDC)
Interrupt capacity
D-type connectors 37-pin, for isolated input channels
Reverse voltage protection for isolated input channels (up to 24 VDC)

PCI-1734   32-channel Isolated Digital Output Card

32 isolated digital output channels
High output driving capacity
High-voltage isolation on output channels (1,000 VDC)
High sink current on isolated output channels (200 mA/channel)
Integral suppression diodes for inductive loads
Wide output range (5 ~ 40 VDC)
D-type connectors 37-pin, for isolated output channels

PCI-1750    DIO & Counter - PCI Bus

16 isolated inputs 5 to 48VDC or dry contact, 2500VDC
16 isolated outputs, open collector 5 to 40VDC, 2500VDC.
One 32-bit timer, one 16-bit isolated counter, 1MHz (82C54).
Connector: DB-37 F external connector. PCI bus. (Cable not included)
Interrupt on inputs 0 & 8, counter & timer.

Cables:    h
PCL-10137-1     D-37 Cable Assembly, 1M $37+GST    7/06
PCL-10137-1E  DB-37 Shielded Cable, 1m $37
PCL-10137-2     D-37 Cable Assembly, 2M $41
PCL-10137-3     D-37 Cable Assembly, 3M $49
PCL-10137H-1  High-speed DB-37 cable assembly, 1m $53
PCL-10137H-3  High-speed DB-37 cable assembly, 3m $90

PCI-1751   DIO & Counter - PCI Bus

48 channel Digital I/O, emulating mode 0 of 8255 PPI, with buffered outputs.
Configured as 6x 8-bit ports, set each as input or output. A user can set any port to be an output port using a jumper.
Ports thus designated are disabled from being software configurable as input ports and behave as default output ports on system start-up or reset.
By contrast, most cards on the market make all ports default input ports. Output status read-back. Interrupt handling.
Two 16-bit counters or one 32-bit counter;
One 16-bit event counter. 0-10MHz.
Connector: 68-pin male (SCSI)   (Cable not included)  

Cables:     h
PCL-10168          68-Pin SCSI Cable,1m $59+GST    7/06
PCL-10168-1E   SCSI-68 Shielded Cable, 1m $59
PCL-10168-2      68-Pin SCSI Cable,2m $84
PCL-10168-2E    SCSI-68 Shielded Cable, 2m $84
PCL-10168M-2    68-pin SCSI cable with centric-male connector 2m $85
PCL-10168M-2E  SCSI-68 Ribbon-Type Cable, 2m $85

ADAM-3968  68 screw terminals to 68-pin SCSI female cnnctr, DIN rail mounting module   Click here

PCI-1752    64-Ch Isolated Digital Output Card - PCI bus

64 isolated digital output channels - High-voltage isolation on output channels (2,500 V DC )
Wide output range (5 ~ 40 V DC ) - High-sink current on isolated output channels (200 mA max./channel)
Board ID - Output status read-back
Keeps digital output values when hot system reset - Channel-Freeze function
Provides convenient wiring terminal module with LED indicators for DIN-rail mounting
Connector: High-density 100-pin SCSI connector   

  Data on Advantech I/O cards, PCI bus: click here

ADAM-3951 Wiring Terminal Module with LEDs DIN-rail Mounting

ADAM-3951 is a SCSI-II 50-pin wiring terminal module with LED indicators for DIN-rail mounting.
This terminal module can be readily connected to the Advantech PC-Lab cards
and allow easy yet reliable access to
individual pin connections for the PCI-1752/ 1754/ 1756 card.      Click here

PCI-1753 & PCI-1753E    DIO 96 or 192 lines - PCI Bus

96 lines, expandable to 192 lines, digital I/O Card for PCI bus.

PCI-1753 has 96 I/O lines emulating mode 0 of 8255 PPI chip but with higher drive capacity.
12 x 8-bit ports, each port configurable to input or output by software.
Four 8-bit ports each have 2 lines connected to an interrupt circuit.
One port has pattern match interrupt.
One port has change-of-state interrupt.
Users can configure each port as input or output via software.
Keeps I/O settings and digital output values during hot system reset.  
Transfer rate 1.6MB/sec under DOS with K6 300MHz CPU.    
Connector: 100-pin connector on the metal bracket.  
 

PCI-1753E Extension Board for PCI-1753, extends I/O from 96 to 192 lines.  

Cables:    h
PCL-10268      100-Pin to two 68-PinSCSI Cable,1m $81+GST    7/06
PCL-10268-2   100-Pin to two 68-PinSCSI Cable,2m $98

ADAM-3968  68-pin flat cable to 68 screw terminal adaptor, DIN rail mounting  Click here

PCI-1754   64-Ch Isolated Digital Input Card - PCI bus

64 isolated digital input channels - High-voltage isolation on output channels (2,500 V DC )
High ESD protection (2,000 V DC ) - High over-voltage protection (70 V DC )
Wide input range (10 ~ 50 V DC ) - Interrupt handling capability
Provides convenient wiring terminal module with LED indicators for DIN-rail mounting
Connector: High-density 100-pin SCSI connector   

  Data on Advantech I/O cards: click here

PCI-1756   Isolated 32 DI and 32 DO Card - PCI bus

32 isolated digital output channels - 32 isolated digital input channels
High-voltage isolation on I/O channels (2,500 V DC )
Wide input range (10 ~ 50 V DC )
Wide output range (5 ~ 40 V DC )
High-sink current on isolated output channels (200 mA max./channel) -High over-voltage protection (70 V DC ) for input channels
Board ID - Output status read-back for output channels - Keeps digital output values when hot system reset
Channel-Freeze function for output channels - Interrupt handling capability
Provides convenient wiring terminal module with LED indicators for DIN-rail mounting -
Connector: High-density 100-pin SCSI connector     

PCI-1760   8 Ch Isolated Dig Inputs, & 8 Relay Output Card - PCI Bus

8 isolated smart digital inputs (2500VDC), and 8 Relay outputs
2 isolated PWM outputs, LED indicators on the relays.
On each digital input there is an 15-bit up counter which increments on both up and down edges of input signal up to 500HZ.
When counter overflows or reaches a SW preset value, it generates an interrupt.
Each input also has a programmable digital filter to eliminate noise, and pattern match & change of state interrupt function
Connector: 37-pin D-type connector.    Many features.      

Cables:    h
PCL-10137-1     D-37 Cable Assembly, 1M $37+GST    7/06
PCL-10137-1E  DB-37 Shielded Cable, 1m $37
PCL-10137-2     D-37 Cable Assembly, 2M $41
PCL-10137-3     D-37 Cable Assembly, 3M $49
PCL-10137H-1  High-speed DB-37 cable assembly, 1m $53
PCL-10137H-3  High-speed DB-37 cable assembly, 3m $90

CAN Bus cards - see "Serial Cards"

  Data on Advantech I/O cards: click here

PCI-1762  16 Ch Isolated Dig Inputs & 16-ch Relay Output Card - PCI Bus

16 isolated smart digital inputs (2500VDC), and 16 Relay outputs
Input voltage: High: 10V to 50V input,    Low (max.): 3 VDC   Opto-isolator response time: 25 us
Relay outputs: Max. Switching Power: 62.5 AV, 30 W,   Max. Switching Voltage: 250 VAC, 220 VDC
Rating contact load: 120 VAC @ 0.5 A or 30 VDC @ 1 A,     Max. Switching Current: 2 A
     Single-pole double-throw (SPDT, Form A or Form B, jumper selectable)
     Breakdown Voltage: Between coil to contacts : 1500 VAC for 1 minute,  1000 Vrms (1 minute)
     LED indicators to show activated relays
     Output status read-back,     Keep relay output values when hot system reset
     Change of State interrupt function for DI0 and DI8
     High-density DB-62 connector,       Board ID (built-in DIP switch)

Axiomtek Analog & Digital I/O Cards  

PCI Bus Cards
    Search the Axiomtek site         Axiomtek Site    azb   ngl

AX4810   GPIB Interface Board - IEEE-488 -PCI bus card  

   Picture of AX4810  GPIB Card

Daughter Boards for outside the PC
AX750   General Purpose Screw Terminal Panel
AX752   16 Channel Amplifier & Multiplexer Panel
AX754   24 Channel Opto-isolated DI Panel
AX755     8 Channel Relay Output & 8 Channel Opto-isolated DI Panel
AX755/24   24 Channel Relay Output & 24 Channel Opto-isolated DI Panel
AX757          8 Channel Relay Output & 16 Channel Opto-isolated DI Panel
AX756A/B   24 Channel Relay Actuator Panel
AX758         16 Channel Relay Multiplexer Panel
AX851         DP-37 Universal Screw Terminal Panel
AX951A/B   Universal Screw Terminal Panel
AX1416/24   Solid-state Module Panel and I/O Module

Advantech ISA Bus Digital I/O Cards

  Data on Advantech I/O cards, ISA bus: click here       Search the Advantech web site

PCL-720   64 Ch Dig I/O + Counter + Breadboard

Digital I/O: TTL 32 lines in, 32lines out, sink 24ma.
Counter/Timer: Programmable, 70154 CMOS: 3ch 16bit.
Breadboard: 31x21 pads, .1" centres. Use connection board PCLD-782/785/786/885/780.
Connector: 5x 20-pin cnnctrs (4 for DIO, 1 for Cntr/Tmr)    

PCL-722   144 Ch Digital I/O Card

144 dig I/O lines, 6 ports of 24 bits, each emulating 8255 mode 0 with buffered output: 24ma I sink & 15ma source.
I/f for Opto-22 I/O module rack card. Two Interrupt inputs, read back of output port state.
6 x 50-pin ribbon cable cnnctrs. Use connection board PCLD-782B/785B/885/ -7216/24Q
Connector: 6x 50-pin flat cable or Opto-22 cnnctrs   

Cables:     h
PCL-10150-1.2     50 Pin Flat Cable, 1.2M For PCL-722 $40+GST    7/06
PCL-10150-1.2E   IDC-50 Flat Cable, 1.2m $40
PCL-10150M-2     50-pin SCSI cable with centric-male connector 2m $66
PCL-10150M-2E   IDC-50 Flat Cable, 2m $66

PCL-724   24 Ch Digital I/O Card

Emulates 8255 PPI chip (mode 0) but with higher drive capacity. Has read-back.
Two Interrupt inputs, Bit 0 of port C can generate interrupt to IRQ 2 to 7.
50-pin cnnctr compatible with OPTO-22 I/O module racks.
Use connection board PCLD-782B/785B/885.
Connector: 1x 50-pin Opto-22 cnnctr, & positions for 2x 20-pin cnnctrs paralleled to the 50-pin.
(Two 20-pin cnnctrs are supplied loose)   

PCL-10150-1.2 Cable flat 50-pin, 1.2m...stake cnnctrs both ends
(for connecting PCL-722 or724 to PCLD-885, 782B, or 785B)   Price: see above

PCL-731   48-bit Digital I/O Card

As for PCL-724, except with 48 lines, Two Interrupt inputs IRQ2 to15.
Two 50-pin connectors. Use connection board PCLD-782B/785B/885/ -7216/24Q.
Connector: 2x 50-pin Opto-22 cnnctrs    

  Data on Advantech I/O cards, ISA bus: click here

‡ Providing Screw Terminals ‡

‡ PCLD-880 external wiring board has 37-pin D connector and 2x 20-pin flat cable cnnctrs for connection to the I/O cards below marked with ‡ sign. See menu at left, 3rd item.

‡ ADAM-3937 has a 37-pin D connector, providing a screw terminal for each pin.

  Data on Advantech I/O cards, ISA bus: click here

PCL-725   Relay Out+Dig Inp, Isol ‡

Relay Contacts: 8 ch SPDT (Form C) 120VAC/DC,1a, 500V AC/DC breakdown, req +12V 33ma per relay from the PC bus, has LED indicator for each relay.
Dig Inputs: 8ch opto 4N25, 1500V isolation, 80ma or 1.5V threshold,
Connector: DB37F (37-pin D-type female cnctr) on card, male cnctr included. ‡   

PCL-730   32 Ch Isolated Dig I/O ‡

16 input & 16 output lines, all isolated, plus
16 input & 16 output line, TTL (not isolated). Use with board PCLD-782/785/786/885/880(isol)
Has 4x 20-pin for the non-isolated I/O &
Connector: 1x DB37F cnnctr for the isolated I/O  ‡  

PCL-733   32 Ch Isolated Dig Inp ‡

2500VDC isolation, Vin +5 to +24VDC, Rin 1.2Kohms, 10KHz thruput, with 2 interrupts (ch 0 & 16): Intrrpt lvls 2,3,5,7,10,12or15.
Connector: 1x DB-37F, use connection board PCLD-880. ‡   

PCL-734   32 Ch Isolated Dig Out ‡

1000VDC isolation, Outputs are open collector transistors with suppression diode for inductive loads (+5 to 40VDC) 200mA/ch. 10KHz thruput. DB37
Use connection board PCLD-880.
Connector: 1x DB-37F.  ‡  

  Data on Advantech I/O cards, ISA bus: click here

PCL-735   12 Ch Relay Output ‡

SPDT, Single pole double throw, Form C contacts.125VAC or 100VDC, 0.6A. 1000VAC/DC breakdown.
Addr two consec. bytes 200H - 3F8H. Readback of relay status, red LEDs on each.
Connector: 1x DB-37F.    A DB-37M mating cnnctr is supplied
Use connection board PCLD-880. Has 1x DB-37F  ‡   

M17066  16 Channel Opto Isolated Input and 16 Channel Reed Relay Output

16 opto isolated digital input channels with a max 45 Volt DC input range.
The input signal can be completely floated to prevent ground loops.
16 reed relays are also included on the card and have a contact rating of 150V DC, 1A
and a life expectancy of 100 million operations at signal level load.
Suitable for use with Windows 95/98/NT.  Data: click here    M17066: $370+GST

PCL-836   6 Ch Counter Timer

Has two 8254 chips, digital filter, binary or BCD, progr freq output, complex duty cycle output, sel interrupt input channel (2,4,5,7,10,11,12,15),
10MHz in, pulsewidth & period measurement, time delay generation, F/V conversion & accumulation; 3 PWM outputs,
16 TTL inputs & 16-bit TTL outputs
Connectors: DB37 D cnnctr for counter I/O, 20-pin male flat cable cnnctr for dig I/O. 185 x 100mm.
Use connection board PCLD-782/785/786/885.
To connect to the DB37, use ADAM-3937 (screw term to DB37) and PCL-10137-1 (D37 cable).  

  Data on Advantech I/O cards: click here

M-SI8255-1 Digital I/O 48 Ch & 3 Counters ISA Bus with 8255-1 chip

This programmable interval timer/counter allows the generation of accurate time delays under software control
& provides 48 digital I/O channels.
It is a programmable peripheral interface for PC/XT, PC/AT, 80386, 80486 or compatible and contains one 8253 chip and two 8255 chips.
The 8253 chip provides programmable interval timer/counter functions and the 8255 chips provide programmable I/O functions.
The 8244 contains three 8-bit ports all of which are software configurable giving a total of 48 I/O TTL lines.

Programmable I/O control functions
Digital I/O software included
Multiple delays can easily be maintained by assignment of priority levels
Implement non delay counter/timer functions such as :
      Programmable Rate Generator, Event Counter, Binary Rate Multiplier,
      Real Time Clock, Digital One-Shot, Complex Motor Controller
Up to 48 I/O lines
Maximum of 2MHz count rate
Three independent 16 bit counters
Supports several operating modes which are programmable
Sixteen LEDs indicate the status on the first 16 channels
Port address selectable       More data: click here

Digital I/O Software
The Digital Data Capture software is a user friendly package designed for acquisition of digital signals with digital I/O adapters under MS-DOS.
Functions provided include the ability to set up address mapping of different types of digital I/O adapters (8255, TTL I/O, ..etc) where I/O port address, channel number...etc are user selectable.
The sampling rate of digital input is also selectable and text or graphics mode may be selected to show the real time data on screen.
After the data has been collected, it can be converted for a printer report or data file.
Supports data acquisition under MS-DOS.      Supports digital I/O adapters whose hardware configurations are user selectable
Supports drivers for several types of display card (EGA, VGA, Hercules)
Auto-interpolation function to map input value (voltage) to the measurement unit (temperature, energy,...etc)
Auto-alarm when input data is out of range.    Auto or manual capture selectable.     Flexible sampling rate selectable
System Requirements:    IBM PC/XT, PC/AT, PC/386 or compatibles, MS DOS V3.1 or higher, at least 128K bytes main memory, one digital I/O adapter, One HDD or FDD
       M-SI82551: $190+GST

Motion Control Cards

   Data on Motion Control cards

PCL-833   3-Axis Quadrature Encoder - ISA bus

3 independent 24-bit up/down counters (cascadable to 48-bit) and 5 digital inputs with 2500VDC isolation.
1MHz quadrature input rate, 2.4MHz input pulse rate, Programmable time interval interrupt.
Use connction board PCLD-782/785/786/885. Has DB25F cnnctr.
Windows dll driver for this card is supplied.  

PCL-839   Stepping Motor Ctrlr - ISA bus

ISA bus. Fully Independent, simultaneous operation of 1, 2, or 3 motors, with dig I/O 8 bit in & 8 bit out.
Uses 3x 8039 processors & ROM to execute ctrl cmds.
Prog speed 1 to >4095 RPM (motor with >200 steps/rev) (ie 3.33 to 13650 pps) with accel/decel.
Either two pulse (CW, CCW) or pulse- direction mode.
Step no 1 to 32767 with read-back step posn. Output opto-coupled with open-collector.
Controllable by programming registers directly. Linear & circular interpolation functions.
Digital I/O (sep from above): 24 lines in 24 lines out, Digital inputs with interrupt, 37-pin mating cnctr.
Half size card. Incl PCL-10437-0 37-pin cnnctr assy.
Windows dll driver for this card is supplied. Disk provided has C Library & Command Interpreter

PCI-1240  4-Axis Stepping/Pulse-type Servo Motor Control Card

 Data on Advantech I/O cards, PCI & ISA bus: click here       Search the Advantech web site

Axiomtek Analog & Digital I/O Cards  

ISA Bus Cards
     Data on Axiomtek ISA bus cards below: click here              Search the Axiomtek site      azb  ngl

AX5008        8 Channel Relay Actuator & Opto-isolated DI Board
AX5032A    16-Channel Relay Actuator & Opto-isolated DI Board
AX5032IO  32 Channel DI & 32 Channel DO with Isolation Board
AX5064I     64 Channel Opto-isolated DI Board
AX5064O   64 Channel Opto-isolated DO Board
AX5210H    16 Channel Data Acquisition Board
AX5210H+  16 Channel Data Acquisition / 2 Channel Analog Output Board
AX5213         2 Channel Isolated Analog Output Board
AX5214H   48 Bit DIO Board
AX5215H   96 Bit DIO Board

AX5216           5 Channel Counter/Timer Board
AX5218         10-Channel Counter/Timer & 24 Bit DIO Board
AX5220HA/B  32 Bit DIO & 3 Channel Counter/Timer Board
AX5224H         24 Bit DIO & 3 Channel Counter/Timer Board

AX5232      32 Channel Isolated Temp./Voltage Measurement Board
AX5244H   144 Bit DIO Board
AX5411H   Multifunction Data Acquisition Board
AX5412H   High Speed Multifunction Data Acquisition Board
AX5621H+  16 Bit Multifunction Data Acquisition Board

Old list:
AX5621H+ 16Bit Multifunction Data Acquisition Board
AX5412H    High Speed Multiunction Data Acquisition Board
AX5411H     Multifunction Data Acquisition Board

AX5232 32   Channel Isolated Temp./Voltage Measurement Board
AX5210H   16 Channel Data Acquisition Board
AX5210H+ 16 Channel Data Acquisition / 2 Channel Analog Output Board
AX5213        2 Channel Isolated Analog Output Board

Digital I/O and Counters
AX5008       8 Channel Relay Actuator & Isolated DI Board
AX5032A   16 Channel Relay Actuator & Opto-isolated DI Board
AX5032IO  32 Channel DI & 32 Channel DO Opto-isolated Board
AX5064I     64 Channel Opto-isolated DI Board
AX5064O   64 Channel Opto-isolated DO Board
AX5214H     48 Bit DIO Board
AX5215H     96 Bit DIO Board
AX5216      5 Channel Counter/Timer Board
AX5218     10 Channel Counter/Timer & 24 Bit DIO board
AX5220HA/B  32 Bit DIO and 3 Channel Counter/Timer Board
AX5224H        24 Bit DIO & 3 Channel Counter/Timer Module
AX5244H     144 Bit DIO Board

Daughter Boards for outside the PC
AX750   General Purpose Screw Terminal Panel
AX752   16 Channel Amplifier & Multiplexer Panel
AX754   24 Channel Opto-isolated DI Panel
AX755     8 Channel Relay Output & 8 Channel Opto-isolated DI Panel
AX755/24   24 Channel Relay Output & 24 Channel Opto-isolated DI Panel
AX757          8 Channel Relay Output & 16 Channel Opto-isolated DI Panel
AX756A/B   24 Channel Relay Actuator Panel
AX758         16 Channel Relay Multiplexer Panel
AX851         DP-37 Universal Screw Terminal Panel
AX951A/B   Universal Screw Terminal Panel
AX1416/24   Solid-state Module Panel and I/O Module

GPIB  -  IEEE-488 Cards

PCI-1670  GBIP Interface PCI-bus - Advantech

Complete IEEE 488.2 compatibility    zcu
Supports Windows 95/98/NT/ME/2000/XP and DOS.
Full driver, library, and example support, including Visual C++, Borland C++
Provides NI-like driver & function libraries.
PCI bus specifi cation 2.1 compliant
I/O address automatically assigned by PCI plug-and-play.
Provides powerful and easy-to-use configuration utility
    Data on PCI-1670

PCI-1670-A      GPIB Interface PCI-bus Card       $737                7/06
PCI-1670L-A    GPIB Interface PCI-bus Card w/o cable  $686
PCI-1671S1-A  GPIB Interface Card with 1M cable $911
PCI-1671S2-A  GPIB Interface Card with 2M cable $911
PCI-1671UP-A GPIB Interface Card                      $831

Cables
PCL-10488-1  IEEE-488 Cable, 1M:   $105+GST
PCL-10488-2  IEEE-488 Cable, 2M:   $114
PCL-10488-4  IEEE-488 Cable, 4M:   $136

GPIB Interface Cards & Software

100060550-CEC  PCI488 PCI GBIP INTERFACE CARD & SOFTWARE             $805.00        7/06  dln
100060900-CEC  PCMCIA-488 PCMCIA GBIP INTERFACE CARD & SOFTWARE  $967.00
100060800-CEC  USB-488 USB GBIP INTERFACE CABLE & SOFTWARE       $805.00

100060300-CEC  PC488 ISA 8 BIT GPIB INTERFACE CARD & SOFTWARE $642.00
100060700-CEC  PC488EX ISA 16 BIT GPIB INTERFACE CARD & SOFTWARE $805.00

Cables
100090000-CEC  IEEE488-CABLE 1/2 METER, DOUBLE SHIELDED $166.00
100090075-CEC  IEEE488-CABLE 3/4 METER, DOUBLE SHIELDED $173.00
100090001-CEC  IEEE488-CABLE 1 METER, DOUBLE SHIELDED $178.00
10009001X-CEC  IEEE488-CABLE 1.5 METER, DOUBLE SHIELDED $190.00
100090002-CEC  IEEE488-CABLE 2 METER, DOUBLE SHIELDED $202.00
10009002X-CEC  IEEE488-CABLE 2.5 METER, DOUBLE SHIELDED $208.00
100090003-CEC  IEEE488-CABLE 3 METER, DOUBLE SHIELDED $213.00
100090004-CEC  IEEE488-CABLE 4 METER, DOUBLE SHIELDED $225.00
100090006-CEC  IEEE488-CABLE 6 METER, DOUBLE SHIELDED $261.00
100090008-CEC  IEEE488-CABLE 8 METER, DOUBLE SHIELDED $296.00

100060901-CEC  PCMCIA/IEEE488 1 METER, DOUBLE SHIELDED $225.00
100060902-CEC  PCMCIA/IEEE488 2 METER, DOUBLE SHIELDED $237.00
100060904-CEC  PCMCIA/IEEE488 4 METER, DOUBLE SHIELDED $249.00

AX4810   GPIB Interface Board - IEEE-488 -PCI bus card  

 Data on AX4810P: click here   AX4810P:  $POA +GST     azb

AX5488   GPIB Interface Board - IEEE-488 - ISA bus card   

 Data on AX5488: click here   Includes various drivers, DOS, Win 3.1/95/NT

AX10488-2    GPIB Cable    $65+GST  when ordered with AX5488

Ines GPIB Solutions - PXI Control Solutions PXI

    GPIB-PCI-XL  GPIB-PCMCIA-XL  GPIB-cPCI-XL  GPIB-PMC-XL  GPIB-PC104  GPIB cables      sns
    Data: click here  

PCI-488-CEC

Plug-and Play Software with Auto Addressing for Instant Switchless Configuration    dln
PCI-488 works in any computer with one or more PCI slots and controls all IEEE488, GP-IB and HP-IB instruments.
It implements all required and optional features of the IEEE-488.2 standard.

PCI-488 Commands: all IEEE-488.2 functions, including listen, talk, device clear, group execute trigger, go to local, interface clear, local lockout, parallel poll configure or disable, remote enable, selected device clear, serial poll, pass control, take control, unlisten and untalk
Macro Commands: commands and data can be combined in a single statement
Addressing: the IEEE-488 address of PC488 is programmable. PC488 can listen or talk to any device at any address
Modes: PC488 supports system controller and device mode programming. Modes are software selectable

Supported Languages: BASIC, QBASIC, Professional BASIC7, QuickBASIC, Visual BASIC for DOS & Windows Quick Pascal,
TurboPascal, Delphi, Quick C for DOS & Windows, C, C++, Visual C/C++, Watcom C, FORTRAN, hpVEE, LabVIEW, LabWindows CVI, TestPoint

ZT-1444A   IEEE-488 Bus - Ziatech    NO LONGER AVAILABLE

Half size card. Incl drivers for Win 3.1, 95, NT. Data rates: programmed I/O: 21KBytes/sec, DMA I/O: 450MBytes/sec
         On-line manuals at www.ziatech.com      NO LONGER AVAILABLE

ZT-1488A   IEEE-488 Bus -Ziatech    NO LONGER AVAILABLE

Full size card, also includes Calender/Clock, battery backed (msec resolution), and a Multimodule (SBX) expansion skt

PCX20-CXB   ARCNET Card - ISA bus    CCSI      Data on ARCNET cards: click here

See also Data Translation cards (supplied by Esis Pty Ltd): click here