ESIS New Website

19" Rackmount PC Chassis
for ATX, etc mainboard


Esis Pty Ltd - Australia - Ph 02 9481 7420  Fax 02 9481 7267  www.esis.com.au 
E-mail: click here       Go to Esis main page

Prices (Australian dollars) do not include GST and may change without notice.  x
Jump to:

Rackmount cases for passive backplane 
(for plug-in CPU and bus cards)


Cases for ATX Mainboards:

5U to 8U Cases, ATX (this page)  
4U Cases, ATX
(this page)              
 
4U Industrial Grade Cases - Advantech
(separate page, ATX and Passive Backplane)

3U Cases  (sep. page)

2U cases (sep. page)

  1U Cases (sep. page)

  Power Supplies (this page)          Slides (this page)  

    Cases with all the connectors at the front (for ATX m'board):   2U Rackmount    Wallmount

   Special cases for ATX Mainboards (e.g. Wallmount, connectors all at front, separate page)


1U= 1.75" =44.45mm
2U= 3.50" =88.9mm

3U=5.25" =133.35mm
4U=7.00" =177.8mm

5U=8.75" =222.25mm
6U=10.50" =266.7mm

7U=12.25" =311.15mm
8U=14.00" =355.60mm

  Reference dimensions of rack units

Width of 19" rack (clearance): 451mm (-0mm)
Horizontal distance between rack mounting holes: 465mm

ATX size: 305mm wide    (12" x 9.7")
depth is often 246mm, can be 210 to 270mm
            

The ATX power supply blows air over the CPU rather than pulling air through the chassis.

ATX superseded the widely-used Baby AT design.
ATX rotates the CPU and memory 90 degrees, allowing full-length boards in all sockets.

The Micro ATX is a smaller version of the ATX with fewer slots.
Micro-ATX size: 243 mm square approx.

Pentium 4 uses 1.7 volts (around 55 W), and also requires a new kind of power supply that ensures the delivery of 10-12 A from the 12V line.
Two additional power connectors are provided for plugging into the motherboard.
One has 4 pins in a square, the other has 6 pins in line.  

CPU Chip Sockets
Pentium II and early Pentium III mount in a Slot 1 socket.
Celeron & AMD K6 chips mount in a Socket 370 (can use a Socket 370 to Slot 1 converter)
Pentium III mount in a Socket 370 = FC-PGA (Flip Chip - Pin Grid Array).

Celeron 1.7GHz  &  Pentium 4  1.8GHz mount in Socket 478
Mobile P4 mount in  µFC-PGA socket
Pentium Xeon mount in Socket 603

Xeon main boards
are usually 305 x 330mm (12" x 13") and need a power supply with special plugs: EPS12V 24-pin + 8 pin plug

Screws:
Power supply and HD:    Four 6-32 UNC screws are required. These have a coarser thread than M3 screws.
Expansion slot cards, floppy disc drives and CD drives require M3 screws. M3 has a finer thread than the UNC 6-32


        Prices do not include GST and may change without notice.
        Prices of cases do not include power supply.       Chenbro case data: click here  

Tower Cases - Large

CSSV-103 Intel Approved High-end Server case with 8x5.25",     2x external  &  4x internal 3.5" bays,
it can fit up to 12"x13"boards, '5 in 4'   &  '3 in 2'  SCA & Redundant Power Optional. DxWxH (518x376x467m).
                                 CSSV-103B black: $360+GST

Specifications
M/B type : Extended ATX (12" x 13")
Drive bays : External 8 x 5.25", External 2 x 3.5", Internal 4 x 3.5"
PSU type : PS2 / Dual redundant 250~500W
Slot opening : 7 x standard PCI slots
Dimensions (mm) : 467(H) x 376(W) x 518(D)
Cooling fan : 2 x 90mm (Standard), 1 x 60mm (Optional), 3 x 80mm(Optional), 1 x 120mm or 1x 90mm (Optional)
Security design: Intrusion switch and Keylock
Sheet metal thickness (mm) : 1.0mm
Pass Intel 2.4GHz DP thermal test
Great flexibility and expandability
Excellent EMI shielding for all the latest Intel P4 and AMD Athlon CPUs
Optional Mobile Rack and Hot-swappable SCA HDD enclosure for RAID application
Sturdy structure design.



           GH-520SR GH-530ATXR GHI-580-SATA GHI-580-U320 GHI-581 GHI-583 GHI-584       GH-600ATXR GH-620SR GHI-611SR GHI-690 GHI-691        GHI-791     GH-800ATXR GH-820SR GHI-891 GHI-P01

5U and up Cases

5U:
APGH-520SR Chassis 5U (Back to Back order)Guanghsing 5U 19" Rackmount 20 slots Passive Backplane Chassis, 4x5.25" & 1x3.5" Open bay, (WxHxD) 483x222x671mm $484+GST    10/10
APGH-530ATXR Chassis 5U (Back to Back order)Guanghsing 5U 19" Rackmount ATX Server Chassis, 4x5.25" & 1x3.5" Open bay, (WxHxD) 483x222x671mm $475

APGHI-528 Chassis 5U (Back to Back order)Guanghsing 5U 19" Rackmount ATX Server Chassis, 8x5.25" & 1x3.5" Open bay, (WxHxD) 483x222x670mm $746
APGHI-580-SATA Chassis 5U Guanghsing 5U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 24x3.5" Hot Swap SATA HDD bay & 2x2.5" HDD Hidden bay, (WxHxD) 483x222x650mm $1,640
APGHI-580-U320 Chassis 5U Guanghsing 5U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 24x3.5" Hot Swap SCSI 320 HDD bay & 2x2.5" HDD Hidden bay, (WxHxD) 483x222x650mm $1,640
APGHI-581 Chassis 5U Guanghsing 5U 19" Rackmount ATX Server Chassis, 1x5.25" & 1xSlim FDD Open bay & 22x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x222x650mm $1,520
APGHI-583 Chassis 5U Guanghsing 5U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 24x3.5" Hot Swap SATA HDD bay & 2x2.5" HDD Hidden bay, (WxHxD) 483x222x650mm $1,852
APGHI-584 Chassis 5U Guanghsing 5U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 24x3.5" Hot Swap SATA HDD bay & 2x2.5" HDD Hidden bay, (WxHxD) 483x222x650mm $1,852
APGHI-591 Chassis 5U Guanghsing 5U 19" Rackmount ATX Server Chassis, 1x5.25" & 1xSlim FDD Open bay & 22x3.5" Hot Swap SATA HDD bay& 1x2.5" HDD Hidden bay, (WxHxD) 483x222x650mm $1,713

DSPC-519AB  Chenbro 5U Rackmount Chassis with 24 SATA Hot Swappable HDD Trays,  Redundant Power & Rails

      Data on 5U Cases: click here

6U:
APGH-600ATXR Chassis 6U Guanghsing 6U 19" Rackmount ATX Server Chassis, 7x5.25" & 1x3.5" Open bay, (WxHxD) 483x266x671mm    $538+GST    10/10
APGH-620SR Chassis 6U (Back to Back order)Guanghsing 6U 19" Rackmount 20 slots Passive Backplane Chassis, 7x5.25" & 1x3.5" Open bay, (WxHxD) 483x266x671mm $538

APGHI-611SR Chassis 6U Guanghsing 6U 19" Rackmount 20 slots Passive Backplane Chassis, 4x5.25" & 2x3.5" Open bay, (WxHxD) 483x266x463mm $880
APGHI-690 Chassis 6U Guanghsing 6U 19" Rackmount ATX Server Chassis, 36x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x266x666mm $2,133
APGHI-691 Chassis 6U Guanghsing 6U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 32x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x266x666mm $2,077

7U:                 
APGHI-791 Chassis 7U Guanghsing 7U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 36x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x311x666mm $2,720

8U: 
APGH-800ATXR Chassis 8U Guanghsing 8U 19" Rackmount ATX Server Chassis, 7x5.25" & 1x3.5" Open bay, (WxHxD) 483x356x510mm $613+GST     10/10
APGH-820SR Chassis 8U Guanghsing 8U 19" Rackmount 20 slots Passive Backplane Chassis, 7x5.25" & 1x3.5" Open bay, (WxHxD) 483x356x510mm $613

APGHI-891 Chassis 8U Guanghsing 8U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 40x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x354x666mm $2,955
APGHI-P01 Chassis 8U Guanghsing 8U 19" Rackmount ATX Server Chassis with 10x1U Blade, 2x3.5" HDD Hidden bay per Blade, (WxHxD) 483x355x830mm $7,415


4U Cases  

        Prices do not include GST and may change without notice.
        Prices of cases do not include power supply.

   For 4U Industrial Grade cases,   see Advantech on separate page: click here

   For 4U cases with shock mounted drive bays, see DSPC-411B (2nd item below), and R430 below.

   Prices of cases do not include power supply.
   For Power Supplies and optional Slide Rails, see just below 4U cases
    chfb

APC-C30 - very short desktop case - DISCONTINUED
Please see APC-C32B below

APC-C32B Lian Li  Rack Mount or Desktop Aluminium Cases

Anodised Aluminium externals, available in black.      lhs    ztrob
Simple external design makes it very high-level with steady and fashionable feeling, desktop and rack mount.
Handles useful for use in rack mount cabinet.
Suits ATX mother board (size 12" x 9.6"), Dim: 426x167x530 deep (W,H,D)

Features:
• Removable PSU tray design.
• Holes and handles for rack mount use on both sides of the case, easy for installation to the rack mount carbinet.
• Easy assembling device for the internal HDD tray design, with the anti-vibration rings
• Silver rim design for the case stand and the simple design of the front panel
• Suitable for ATX power supply
• Removable internal drive cages allow for long expansion cards and easy installation

Removable handles (Desktop / Rack mount)
Removable HDD module 5.25" to 3.5" converter
High quality aluminium switch button
Ventilators for PCI slot
Removable 12cm fan module
Removable PSU tray
Spare 14cm fan mount, Spare 8cm fan mount
Anti-Vibration rubber rings
Case stand

APC-C32B (Black) Lian Li
Rack Mount or Desktop Aluminium Case:  $330+GST   10/09

Specifications:
Drive bays: External 5.25" x 2 (5.25" to 3.5" converter x 1), Internal 3.5" x 4
Fan: 12cm ball bearing fan x 2
M/B Type: ATX M/B (Max size : 12" x 9.6")
Front I/O: USB2.0 x 2, IEEE1394 x 1, Mic skt x 1, Earphone skt x 1
Dimension: 426 x 167 x 530mm deep (W.H.D)
Slot: PCI slot x 7

  More pictures (Lian Li site, opens new window)

 

APGH 4U Cases

GH-402ATXR GH-402SR GH-403SR GH-410ATXR GH-410SR GH-411ATXR GH-411SR GH-414ATXR GH-414SR GH-416ATXR GH-416SR GH-418ATXR GH-418SR GH-430ATXR GH-430SR GH-431ATXR GH-431SR GH-432ATXR GH-432SR GHI-403ATXR GHI-404 GHI-405 GHI-406ATXR GHI-415ATX GHI-419ATX-F9-USB GHI-419ATXR GHI-419SR GHI-433 GHI-440 GHI-441 GHI-442 GHI-443 GHI-450 GHI-451 GHI-460 GHI-470 GHI-479 GHI-480-SATA GHI-480-U320 GHI-481-SATA GHI-481-U320 GHI-489 GHI-4F1ATXR GHI-4F2ATXR GHI-B40 GHI-M40ATXR GHI-M41ATXR GHI-P02

In depth order:      zoh

ATX Cases (very short first):
451mm Deep ATX M/B (Max. to 12" x 9.6" size)    APGH-402ATXR
510mm Deep ATX M/B (Max. to 12" x 9.6" size)    APGH-410ATXR
510mm Deep ATX M/B (Max. to 12" x 9.6" size)    APGH-411ATXR
510mm Deep ATX M/B (Max. to 12" x 9.6" size)    APGH-414ATXR
510mm Deep ATX M/B (Max. to 12" x 9.6" size)    APGH-416ATXR
510mm Deep ATX M/B (Max. to 12" x 9.6" size)    APGH-418ATXR
510mm Deep ATX M/B (Max. to 12" x 10" size)     APGHI-479ATX
510mm Deep ATX M/B (Max. to 12" x 10" size)     APGHI-489ATX
510mm Deep ATX M/B (Max. to 12" x 13" size)     APGH-419ATXR

571mm Deep ATX M/B (Max. to 12" x 10.3" size) APGHI-441
624mm Deep ATX M/B (Max. to 12" x 13" size)    APGHI-442
650mm Deep ATX M/B (Max. to 12" x 13" size)    APGHI-480
650mm Deep ATX M/B (Max. to 12" x 13" size)    APGHI-481
671mm Deep ATX M/B (Max. to 12" x 13" size)    APGH-430ATXR
671mm Deep ATX M/B (Max. to 12" x 13" size)    APGH-431ATXR
671mm Deep ATX M/B (Max. to 12" x 13" size)    APGH-432ATXR

Passive Backplane Cases:
302mm Deep    APGH-410SR
451mm Deep 14/15-slot Passive Backplane    APGH-402SR
451mm Deep 14/15-slot Passive Backplane    APGH-403SR
510mm Deep 14/15-slot Passive Backplane    APGH-411SR
510mm Deep 14/15-slot Passive Backplane    APGH-414SR
510mm Deep 14/15-slot Passive Backplane    APGH-416SR
510mm Deep 14/15-slot Passive Backplane    APGH-418SR
510mm Deep 14/15-slot Passive Backplane    APGH-419SR
671mm Deep 14/15-slot Passive Backplane    APGH-430SR
671mm Deep 14/15-slot Passive Backplane    APGH-431SR
671mm Deep 14/15-slot Passive Backplane    APGH-432SR

4U 19" Rackmount ATX Server Chassis & Passive Backplane Chassis

Alphabetical List (very short case depths up to 490mm are shown in bold)
APGH-402ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x451mm                     $269+GST   10/10     zoh
APGH-402SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x451mm $275
APGH-403SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x451mm $292
APGH-410ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" Open bay & 1x3.5" HDD Hidden bay, (WxHxD) 483x177x302mm 510mm on mfr site $272
APGH-410SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 3x5.25" Open bay & 1x3.5" HDD Hidden bay, (WxHxD) 483x177x302mm 510mm on mfr site $277
APGH-411ATXR 4U 19" Rackmount ATX Server Chassis, 4x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x510mm $318
APGH-411SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 4x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x510mm $318
APGH-414ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x510mm $278
APGH-414SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x510mm $278
APGH-416ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x510mm $274
APGH-416SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x510mm $274
APGH-418ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay & 2x3.5" HDD Hidden bay, (WxHxD) 483x177x510mm $219
APGH-418SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 3x5.25" & 1x3.5" Open bay & 2x3.5" HDD Hidden bay,(WxHxD) 483x177x510mm $219

APGH-431ATXR 4U 19" Rackmount ATX Server Chassis, 6x5.25" & 1x3.5" Open bay & 1x3.5" HDD Hidden bay, (WxHxD) 483x177x671mm $426
APGH-431SR      4U 19" Rackmount 14 slots Passive Backplane Chassis, 6x5.25" & 1x3.5" Open bay & 1x3.5" HDD Hidden bay, (WxHxD) 483x177x671mm $426

APGHI
APGHI-403ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x451mm $292
APGHI-404      4U 19" Rackmount ATX Server Chassis, 2x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x408mm $327
APGHI-405      4U 19" Rackmount ATX Server Chassis, 1x5.25" Open bay & 2x3.5" HDD Hidden bay, (WxHxD) 483x177x355mm $363
APGHI-406ATXR 4U 19" Rackmount ATX Server Chassis, 2x5.25" Open bay & 4x2.5" HDD Hidden bay, (WxHxD) 483x177x302mm $345
APGHI-407 Chassis 4U Guanghsing 4U 19" Rackmount ATX Server Chassis, 1x5.25" & 2x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x177x408mm $430
APGHI-408ATXR Chassis 4U Guanghsing 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay, (WxHxD) 483x177x451mm $388
APGHI-415ATX 4U 19" Rackmount ATX Server Chassis with 6.4" TFT (640*480 Rec.), 1xSlim CD-ROM Open bay & 1x3.5" HDD Hidden bay, (WxHxD): 483x177x490mm $2,095
APGHI-419ATX-F9-USB 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay & 5x3.5" HDD Hidden bay, (WxHxD) 483x177x510mm $281
APGHI-419ATXR 4U 19" Rackmount ATX Server Chassis, 3x5.25" & 1x3.5" Open bay & 5x3.5" HDD Hidden bay, (WxHxD) 483x177x510mm $264
APGHI-419SR      4U 19" Rackmount14 slots Passive Backplane Chassis, 3x5.25" & 1x3.5" Open bay & 5x3.5" HDD Hidden bay,(WxHxD) 483x177x510mm $264


APGHI-433 4U 19" Rackmount ATX Server Chassis, 6x5.25" & 1x3.5" Open bay & 1x3.5" HDD Hidden bay, (WxHxD) 483x177x573mm $976
APGHI-440 4U 19" Rackmount ATX Server Chassis, 8x5.25" & 1x3.5" Open bay & 4x3.5" HDD Hidden bay, (WxHxD) 483x177x624mm $488
APGHI-441 4U 19" Rackmount ATX Server Chassis, 8x5.25" & 1x3.5" Open bay & 4x3.5" HDD Hidden bay, (WxHxD) 483x177x571mm $487
APGHI-442 4U 19" Rackmount ATX Server Chassis, 12x5.25" Open bay, (WxHxD) 483x177x624mm $490
APGHI-443 4U 19" Rackmount ATX Server Chassis, 3x5.25" Open bay & 10x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x133x624mm $977
APGHI-450 4U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 2x3.5" HDD Hidden bay, (WxHxD) 483x222x557mm $930
APGHI-451 4U 19" Rackmount ATX Server Chassis with 10.4" TFT (800*600 Rec.), 1xSlim CD-ROM & 1xSlim FDD Open bay & 2x3.5" HDD Hidden bay, (WxHxD) 483x222x557mm $1,983
APGHI-460 4U 19" Rackmount ATX Server Chassis, 3x5.25" Open bay & 5x3.5" HDD Hidden bay, (WxHxD) 483x177x710mm $688

APGHI-479 4U 19" Rackmount ATX Server Chassis with VFD Display Module, 6x5.25" & 2x3.5" Open bay, (WxHxD) 483x177x510mm $427
APGHI-480-SATA 4U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 16x3.5" Hot Swap SATA HDD bay & 2x2.5" HDD Hidden bay, (WxHxD) 483x133x650mm $1,316
APGHI-480-U320 4U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1xSlim FDD Open bay & 16x3.5" Hot Swap SCSI 320 HDD bay & 2x2.5" HDD Hidden bay, (WxHxD) 483x133x650mm $1,316
APGHI-481-SATA 4U 19" Rackmount ATX Server Chassis, 1x5.25" & 1xSlim CD-ROM & 1xSlim FDD Open bay & 14x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x133x650mm $1,316
APGHI-481-U320 4U 19" Rackmount ATX Server Chassis, 1x5.25" & 1xSlim CD-ROM & 1xSlim FDD Open bay & 14x3.5" Hot Swap SCSI 320 HDD bay, (WxHxD) 483x133x650mm $1,316
APGHI-489 4U 19" Rackmount ATX Server Chassis, 1x5.25" & 1x3.5" Open bay & 8x3.5" Hot Swap SATA HDD bay, (WxHxD) 483x177x510mm $1,009
APGHI-4F1ATXR 4U 19" Rackmount ATX Server Chassis, 1xSlim CD-ROM & 1x3.5" Open bay & 2x3.5" HDD Hidden bay, (WxHxD) 483x177x450mm $430
APGHI-4F2ATXR 4U 19" Rackmount ATX Server Chassis, 1x5.25" & 1x3.5" Open bay & 2x3.5" HDD Hidden bay, (WxHxD) 483x177x450mm $430

APGHI-M40ATXR Chassis 4U Guanghsing 4U 19" Rackmount ATX Server Chassis with 6.4" TFT (640*480 Rec.), 1xSlim CD-ROM Open bay & 3x3.5" HDD Hidden bay & 4x3.5" Hot Swap SATA HDD bay, (WxHxD): 483x177x510mm $2,118
APGHI-M41ATXR Chassis 4U Guanghsing 4U 19" Rackmount ATX Server Chassis with 7" TFT (800*480 Rec.), 1x5.25" Open bay & 3x3.5" HDD Hidden bay & 3x3.5" Hot Swap SATA HDD bay, (WxHxD): 483x177x510mm $2,118

APGH-402ATXR   &   APGH402SR - very short cases

APGH-402ATXR   ATX M/B (Max. to 12" x 9.6" size), case 451mm deep
APGH-402SR       14/15-slot Passive Backplane, case 451mm deep    zoh

  Larger picture  Picture of rear  Dimensioned diagram

EIA RS-310C 19" Rackmount Standard. Heavy Duty Cold Rolled Electroplated Steel
Color: Black, Beige, or Custom Design
System Boards: Pentium 4, Pentium III based boards
APGH-402ATXR Board Size: SupportsATX M/B (Max. 12" x 9.6") ; or
APGH-402SR          Supports 14/15-slot Passive Backplane board -
Drive Bays: 3x5.25" + 1x3.5" FDD at bottom opening.

Power Supply type: Rear installed Single 250-400W P/S2 or Mini Redundant 230-400W power supply.
Cooling Units: 1x12cm Ball Bearing Fan with 90CFM/Each.  Optonal 2nd fan available.
Expansion Slot: 7-Slot for APGH-402ATXR, or 14-Slot for SR

Indicators: LED for Power & HDD Activity
Buttons: Power On/Off & System Reset Dimensions:    19" x 4U x 451 mm deep (17.75" deep)
Weight: 17kg/37.5 lbs    Cu. ft.: 5.04  Carton Size: 59.1 x 34 x 63.2 cm
Product Applications: Web Server, Firewall Server, Proxy Server, VPN Gateway, High-End Workstation
   APGH-402ATXR  for ATX M/B (Max. to 12" x 9.6" size), case 451mm deep, wo power supply:  $269+GST    5/10
    Power Supply for above:  Please enquire

 

APGH-410ATXR / SR  - 510mm deep

This 4U chassis has flexible hold down bar protects the plug in cards from vibration.
Removable air filter; 1x12cm ball bearing fan with 108CFM/Each, and extra optional 1x12cm ball bearing fan with 108CFM/each.

EIA RS-310C 19" Rackmount Standard
Construction: Heavy Duty Cold Rolled Electroplated Steel
Color: Black, Beige, or Custom Design
System Boards: Pentium 4, Pentium III based boards
Board Size : Support ATX M/B (Max. 12" x 9.6") - GH-410ATXR; or
Support 14/15-slot Passive Backplane board - GH-410SR
Drive Bays: 3x5.25" + 1x3.5"FDD at top open,
Optional 1x3.5"HDD hidden.

Power Supply: Rear installed Single 250-400W P/S2 or Mini Redundant 230-400W power supply.
Cooling Units: 1x12cm Ball Bearing Fan with 90CFM/Each. Optonal 2nd fan available.
Expansion Slot: 7-Slot for GH-410ATXR, or 14-Slot for GH-410SR
Indicators: LED for Power & HDD Activity
Buttons: Power On/Off & System Reset
Dimensions: 480(W) x 177H) x 510(D) mm
Weight: 19kg/41.8 lbs     Cu. ft.: 5.04
Carton Size: 69x 60x 34.5 (Cm) (27.2" x 23.6" x 13.6")
Product Applications: Web Server, Firewall Server, Proxy Server, VPN Gateway, High-End Workstation

Chassis Height: 4U
Dimensions: 482.6(w) x 177.8(h) x 510.54(d) - mm
Drivebays: 3x5.25
Power supply: Rear installed Single 250-400W P/S2 or Mini Redundant 230-400W power supply.


APGH-419ATXR

APGH-419ATXR, for ATX M/B (up to 12" x 13" size), case 510mm deep

    Larger Picture     Picture of Rear     Dimensioned diagram     zoh

EIA RS-310C 19" Rackmount Standard,  Heavy Duty Cold Rolled Electroplated Steel
Color: Black, Beige, or Custom Design
System Boards: Dual Xeon, Dual Opteron, Pentium 4, Dual Pentium III based boards
Motherboard Size: Support ATX M/B (Max. to 12" x 13")
Drive Bays: 2 x 5.25"(Open), 1 x 3.5"(Open), 5 x 3.5"(Hidden), (Optional 1 x 3.5" HDD Bracket)
Power Supply type: (Rear Chassis Installation) Single or Redundant PS2 Power Max Depth. 300mm (Optional)
Cooling Units: 2 x (90mm = 51CFM ea.), 2 x 60mm (23.5CFM ea. Optional) Heavy Duty Ball Bearing Fans
Filter: Removeable Door Filters for Washing
Expansion Slot: 7 x Vertical Full Height PCI Slots
Indicators: LEDs for Power & HDD Activity
Buttons: Power On/Off & System Reset Buttons
Door(s): 1 x Front Door with Thumbscrew, 1 x Front Door with Keylock
Dimensions: 483(W) x 177(H) x 510(D) mm (19" x 7.0" x 20.1")
Weight: 19kgs / 41.8lbs,    Cu. ft.: 4.9,   Carton Size: 68.8x 34 x 59.1(27.1" x 13.4" x 23.3")
Product Applications: Web Server, Email Server, Proxy Server, Print Server, File Server
    APGH-419ATXR, for ATX M/B (up to 12" x 13" size), case 510mm deep, without power supply

   Prices of cases do not include power supply.
   For Power Supplies and optional Slide Rails, see just below 4U cases
    chfb    U p

 


DSPC   4U Rackmount Cases

DSPC-423B                 DSPC-422B                  DSPC-41416AB    
DSPC-846TQ-900B     DSPC-846E1-R900B    DSPC-846E2-R900B

DSPC-423B Short Case

Chenbro Black 4U 19" Rack-mount Chassis for CBE/ATX motherboard,      5/10
3x5.25", 1x3.5" External Bays & 4x3.5" Internal Bays,
1x120mm front fan, 2xFront USB2.0, 2x80mm fan option, PSU option, Slide rail kit option,
WxDxH(430x445x176mm) 19" x 4U x 445mm deep

DSPC-422B

Chenbro Black 4U 19" Rack-mount Chassis for ATX motherboard,
3x5.25", 2x3.5" External Bays & 3x3.5" Internal Bays,
1x120mm front fan, 2xFront USB2.0, 2x80mm fan option, PSU option, Slide rail kit option,
WxDxH(430x522x176mm) 19" x 4U x 522mm deep

DSPC-41416AB  

Chenbro Black 4U 19" Rack-mount Chassis for ATX/EATX motherbaord,
1x5.25" bay, 1x3.5" internal bay, 1xslim CD-ROM bay, 1xFDD bay, 16x3.5" SAS/SATA hot swappable HDD Trays,
5 x 8cm Hot Swap Cooling Fans, 2 USB Ports and LED Display, 2x80mm rear fan option, PSU option, Slide rail kit option, WxDxH(430x660x176mm) 19" x 4U x 660mm deep

DSPC-846TQ-900B

Supermicro Black 4U 19" Rack-mount Server Chassis for ATX/EATX Mainboard,
24x3.5" Hot Swap SAS/SATA HDD Bays, 1xDVD drive bay,
7x Full-height, Full-length Expansion Slots,
3x 5000 RPM Hot-swap Cooling PWM Fans and 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans, 900W PSU, Slide rail kit,
WxDxH (437x660x178mm) 19" x 4U x 660mm deep

900W Dual CPU,   Rack mount,   Drive Bays: 24 x SAS/SATA HotSwap

DSPC-846E1-R900B

Supermicro Black 4U 19" Rack-mount Server/Storage Chassis,  Dual CPU
24 x 3.5" Hot Swap SAS/SATA HDD Bays, Hard Drive Backplane with 1 x 36-Port 3Gb/s SAS Expander Chips & Enclosure Management,
support for max 13" x 13.68" EATX M/B,
900W redundant PSU, Slide rail kit, Fixed CD-ROM Kit w/o Tray option, WxDxH (437x660x178mm) 19" x 4U x 660mm deep

DSPC-846E2-R900B

Supermicro Black 4U 19" Rack-mount Server/Storage Chassis,  Dual CPU  
24 x 3.5" Hot Swap SAS/SATA HDD Bays, Hard Drive Backplane with 2 x 36-Port 3Gb/s SAS Expander Chips & Enclosure Management,
support for max 13" x 13.68" EATX M/B,
900W redundant PSU, Slide rail kit, Fixed CD-ROM Kit w/o Tray option, WxDxH (437x660x178mm) 19" x 4U x 660mm deep

 

 

DSPC-4300B Black 4U short case

DSPC-4300B is designed with super strong sheet metal, extremely durable, enhanced mechanical construction, sheet metal's edge have no sharp burs.  chfb
Strong cooling system inside of the chassis and two invisible USB 2.0 ports inside of the front door.
Ideal system for enterprise server or DVR system.
Supports most PS2 power supply or redundant power supply assembly without any special mounting brackets.
              Larger picture of DSPC-4300B       Picture of Rear

5 drive bays
3 x standard 5.25" CD-ROM Bay
2 x standard 3.5" internal HDD Bay (one can be FDD installable)

2 USB 2.0 ports inside of the front door
Butterfly keylock and air filter included front door for security control
1 intake 120 x 25mm and one 80 x 25mm ball bearing fans
Removable fan bracket (left, right air flow direction)
Supports most ATX motherboard at maximum 12" x 9.6"
Supports 7 slot full height (max. 290mm depth) expansion cards housing
Black colored painting as standard
External dimension: 19" x 4U x 480mm deep

DSPC-4300B Black 4U  19” Rack-mount Chassis for ATX motherboard,
3x5.25"& 2x3.5” bays, 19" x 4U x 480mm deep                                   $203+GST    11/06
Options (not included): 1x60mm rear fan option, PSU option, Slide rail kit option,

Options:
PS-5240F           Enhance 400W ATX12V 24+4pin PS2 PSU, +12V1:14A, +12V2:15A, 2xSATA & 1xPCI-E connector $65
PS-5150F           Enhance 500W Intel Approved ATX12V 24+4pin PS2 PSU for Pentium D CPU,
                                                  +12V1:18A, +12V2:18A, 2xSATA & 1xPCI-E connector $100
PSR-6460MRG   Zippy 500W EPS12V 24+8+4pin Mini Redundant PSU for P4/PD system, +12V:32A $624
DSPC-SLIDE20   20" Slide rail kit for DSPC-4400/4400B $62
DSPC-HDD          Additional 1xHDD Mounting Bracket $13
DSPC-DVR           DVR Back Plate $63
CASE-FAN6         60x60x25mm Ball Bearing Fan $32

DSPC-411B Deeper Case, Chenbro - with 3 x 5.25" & 2 x 3.5" External Bays

Passes Intel thermal test     Great flexibility and expandability    Sturdy structure design.
Great thermal characteristics for optimal cooling.
Excellent EMI shielding for all the latest Intel P4 and AMD Athlon CPUs.
Support ATX & Full Size ATX Motherboards up to 12" x 13".
Folded edges for safe assembly and installation.         DSPC-411 larger picture
Flexible / removable mainboard standoff design.
Intrusion switch and Keylock for security.
Excellent ventilation.
Removable and washable Fan filter.
Different front bezel for your choice.
Lockable aluminum front door to secure system.   Black only

9 Drive Capacity:  External bays: 3 x 5.25" , 2 x 3.5" bays,    Internal Bays: 4x3.5"
Damping rubber mounting of HDD cage, hold down clamps for add-on PCI bus cards
Fans: 1x12cm on front panel   Option: Fans: 1x6cm & 1x8cm ($30+GST) at rear panel  zmx
   Removable and washable air filter.   Tested with Intel 2.4GHz DP Xeon, 3GHz Prescott CPUs
Control Panel: 1x Power on/off, 1x Reset switch, 6xHDD LEDs     
Compatible with PS2 or 300W~600W redundant power supply     Other cases from Chenbro   www.chenbro.com.tw
    Pictures from top, back & front      Large picture from front  

    Photo from front showing the inside    Photo from above
    From rear     From Right Side    Expansion Card Clamps
Dimension:19" x 4U x 596mm deep
Packed weight: 19.5kg     Cubed weight for carriers: 32kg (at 250kg/m3)

DSPC-411B Chenbro Black 4U 19" Rack-mount Chassis for ATX/EATX motherboard,
3x5.25", 2x3.5" External Bays & 4x3.5" Internal Bays, 19" x 4U x 596mm deep     $247+GST   11/06
Options (not included):1x80mm & 1x60mm rear fan option, PSU option, Slide rail kit option,

Options:
PS-5240F      Enhance 400W ATX12V 24+4pin PS2 PSU, +12V1:14A, +12V2:15A, 2xSATA & 1xPCI-E connector $65
PS-5150F      Enhance 500W Intel Approved ATX12V 24+4pin PS2 PSU for Pentium D CPU,
                                 +12V1:18A, +12V2:18A, 2xSATA & 1xPCI-E connector $100
PS-0565        Enhance 650W EPS12V 24+8pin PSU, +12V1:13A, +12V2:18A, +12V3:16A, +12V4:8A $199
PS-0575       Enhance 750W EPS12V V2.8 24+8pin PSU, +12V1:18A, +12V2:18A, +12V3:18A, +12V4:18A, +5VSB 3.5A,
                                                                                                                            supports Xeon 5000/5100 CPU $388.00
PSR-6460MRG   Zippy 500W EPS12V 24+8+4pin Mini Redundant PSU for P4/PD system, +12V:32A $624
PSR-6650R3G    Zippy 650W EPS12V Redundant PSU 24+8+4pin, +12V:40A, Power bracket needed $775
DSPC-PB7           Power Bracket with PSR-6650G3G  $15
DSPC-SLIDE26   26" Slide rail kit $87
CPUF-SKT107    Nocona Xeon 800MHz CPU mounting pad
                                     for Intel(SE7320SP2/SE7525GP2) / Supermicro / Tyan CEB sized boards $15
CPUF-2U-S775   S775 Pentium 4 CPU Copper cooler for 2U+ Chassis $62
CPUF-OPT2U+    S940 Copper CPU cooler for 2U+ Chassis $87
CASE-FAN6        60x60x25mm Ball Bearing Fan $32
CASE-FAN8        80x80x25mm Ball Bearing Fan $32

DSPC-4400 - no longer made

DSPC-421B - similar to DSPC-4300B but better quality

   These cases do not include power supplies.
   For Power Supplies and optional Slide Rails,
see just below 4U cases    chfb

DSPC-4500  Very Deep Case, Beige - with 8 x 5.25" & 1 x 3.5" External Bays - Obsolete

 with 8 x 5.25", 1 x 3.5" external bays,  
Ultra Cool design for Micro ATX/ATX/Server Mainboard    Large picture
9 Drive Capacity:  External bays: 8 x 5.25" bays, 1 x 3.5" bay
Fans 4x8cm cooling , option: 2x6cm fans at rear panel       Centre Panel
Equipped adjustable / removable Fan Holder in middle of chassis
Control Panel: 1xpower on/off, 1xreset switch, 4xHDD LEDs   Top View
Compatible with PS2 or 300W~600W redundant power supply
Compatible with any ATX motherboard up to 12x13" full size    Accessories
Dimensions: 19" x 4U x 660mm deep. Brackets for supporting the rear are provided - see picture of Accessories
Optional Sliding Rails: DSPC-SLIDE24      
Optional Digital Video Recording Rear Panel      DSPC-4500B from front     DSPC-4500 Rear View

DSPC-4500 Beige 4U 19" Rack-mount Chassis for ATX/EATX motherboard,
8x5.25" & 1x3.5" External Bays, 2x60mm rear fan option, 19" x 4U x 660mm deep    $290+GST    11/06
Options (not included):  PSU option, Slide rail kit option

Options:
PS-5240F Enhance 400W ATX12V 24+4pin PS2 PSU, +12V1:14A, +12V2:15A, 2xSATA & 1xPCI-E connector $65
PS-5150F Enhance 500W Intel Approved ATX12V 24+4pin PS2 PSU for Pentium D CPU, +12V1:18A, +12V2:18A, 2xSATA & 1xPCI-E connector $100
PS-0565 Enhance 650W EPS12V 24+8pin PSU, +12V1:13A, +12V2:18A, +12V3:16A, +12V4:8A   $199
DSPC-SLIDE24 24" Slide rail kit $62
CPUF-2U-S775 S775 Pentium 4 CPU Copper cooler for 2U+ Chassis $62
CPUF-OPT2U+ S940 Copper CPU cooler for 2U+ Chassis $87
CASE-FAN6 60x60x25mm Ball Bearing Fan $32

DSPC-942B Supermicro Black 4U - with 8 x 5.25" External Bays

19" Rack-mount Chassis for ATX/EATX motherboard, 12" x 13" E-ATX
8x 5.25" External Bays (6 in a row), 1xFDD bay, 2x Front USB2.0,
3x 12cm fans inside, rear exhast fan 12cm, 6 LED indicators
WxDxH: 437x625x178mm    Black 
This has 8x 5.25" external bays and is better quality than the DSPC-4500 above,
can direct mount 3.5" drives int the 5.25" bays, big cooling fans in back & inside.
Takes 7 expansion slots, full height, full length
Chassis intrusion switch
This is a tower case, and requires item below for rack mounting.
Inside is easily accessible    Pictures: click here (the Mobile Rack with 4 drives is an option)
Side Handles not included (available with Optional Rail Kit)  
Dimensions: 19" x 4U x 625mm deep,    Gross Weight 65 lbs (29.5kg)

DSPC-942B Supermicro Black 4U 19" Rack-mount Chassis for ATX/EATX motherboard,
8x5.25" External Bays(can direct mount 3.5" HDD), 1xFDD bay,
2x Front USB2.0, 3x12cm fans, 19" x 4U x 625mm deep:                             $441+GST     5/10

Options (not included): SATA/SCSI enclosure for hot swappable HDD option,
                                         PSU option, Rackmount kit(include slide rail) option

Rack mount and slide rail kit to suit above:
DSPC-PT26: $95+GST when ordered with box

Options:
PS-5150F    Enhance 500W Intel Approved ATX12V 24+4pin PS2 PSU for Pentium D CPU,
                                +12V1:18A, +12V2:18A, 2xSATA & 1xPCI-E connector, bracket required $100.00
PS-0060     Supermicro 645W EPS12V 24+8+4pin PS2 Low Noise PSU, +12V:46A, +5VSB:4A $307.00
PS-0575     Enhance 750W EPS12V V2.8 24+8pin PSU, +12V1:18A, +12V2:18A, +12V3:18A, +12V4:18A, +5VSB 3.5A,
                                                                                              supports Xeon 5000/5100 CPU, bracket required $388.00
PSR-PWS0050 Supermicro 760W EPS12V 24+8+4pin Redundant PSU, +12V:50A, Back to Back order $925.00
DSPC-PT26 Rackmount kit with 26" slide rail $95.00
MBRK-SK323B Black RAID Enclosure for 3 SATA HDDs in 2x5.25" Bay $169.00
MBRK-SK335 Black RAID Enclosure for 5 SATA HDDs in 3x5.25" Bay $294.00
MBRK-SK223B Black RAID Enclosure for 3 SCSI HDDs in 2x5.25" Bay $207.00
CPUF-2U-S775 S775 Pentium 4 CPU Copper cooler for 2U+ Chassis $62.00
CPUF-OPT2U+ S940 Copper CPU cooler for 2U+ Chassis $87.00
CPUF-SKT0159 Nocona Xeon 800MHz CPU mounting pad for Supermicro/Tyan CEB sized boards $15.00

   Prices of cases do not include power supply.
   For Power Supplies and optional Slide Rails, see just below 4U cases
    chfb

DSPC-41416AB Chenbro Black 4U
                           - with 16 x 1" SAS/SATA hot swappable HDD Trays

See next item DSPC-41416B for detailed description & specifications.
This item features SAS/SATA hard disk support.

DSPC-41416AB Chenbro Black 4U 19" Rack-mount Chassis for ATX/EATX motherboard,
Internal bays: 1x5.25", 1x3.5",
External bays: 1x slim CD-ROM, 1x FDD Bays, 16x 1" SAS/SATA hot swappable HDD Trays,
5 x 8cm Hot Swap Cooling Fans, 2 USB Ports and LED Display, 19" x 4U x 660mm deep    $1,190+GST     11/06
Options (not included): 2x80mm rear fan option, PSU option, Slide rail kit option
         Larger Picture        Picture of inside from top  

Options:
PS-6800PSL     Zippy 800W EPS12V 24+8+4pin PS2 PSU, +12V:60A, 4xSATA, 2xPCI-E cnnctrs $563
PSR-5700MX3  Zippy 700W EPS12V Redundant PSU 24+8+4pin for CSSV-107NB, +12V:52A $863
DSPC-PB9            Power Bracket with PSR-5700MX3 $15
PSR-5800R3G     Zippy 800W EPS12V 24+8+4pin Redundant PSU, +12V:49A, +5VSB:4A $932.00
DSPC-SLIDE2U  24" Slide rail kit $87
CPUF-SKT0159  Nocona Xeon 800MHz CPU mounting pad for Supermicro/Tyan CEB sized boards $15
CPUF-SKT107    Nocona Xeon 800MHz CPU mounting pad for Intel 7320SP2/7525GP2/Supermicro/Tyan CEB sized boards $15
CASE-FAN8        80x80x25mm Ball Bearing Fan $32

DSPC-41416B Chenbro Black 4U - with 16 x 1" HD Trays

Screw-less top cover for easy maintenance    chfb
Hot-swap trays for easy maintenance
Complete System Function & Compatibility:
     Support storage capacity up to 4TB and more
     Compatible with 3 Ware/Highpoint RAID Card
     Support 3Ware/Highpoint Multilane SATA solution
     Support SATA HDD activity LED via 3Ware RAID cards
     Front access USB 2.0 ports
Excellent Thermal Solutions
     16 drive bays
     Support 4 pcs of 4-in-1 BP for good ventilation
     1 x 60 mm + 1 x 80 mm rear fans for excellent air ventilation
System Monitoring: Fan / over-heat fault detection
      Reset switch to disable audible warning
Applications:   Media/Streaming Server/Video-on-Demand
     Mobile Internet Service System
     Corporate Files Servers, DB/File Server
     Tape Replacement and Near-Line Storage
     NAS and SAN
     Data Warehousing Systems, Data Retention and Archives
     Security and surveillance systems, Digital Image Capture
     Application Server (ERP/Groupware)

Specifications:
M/B form factor: Extended ATX (12" x 13")
CPU Type: AMD DP Opteron/ Intel DP Xeon/Nocona
Dimension (DxWxH): 19" x 4U x 660mm deep
Drive Bays: External: 1x 5.25", 1x3.5", 1x Slim CD-ROM
                     Internal: 3.5": 1
                     HDD Trays:16
PSU: Form Factor: Single or Redundant
Switches/ Controls: Power ON/OFF,
         Alarm Reset, System Reset, 2x USB 2.0 Ports
Indicators: Power ON/OFF, HDD/LAN Activity,
         Fan Failure and Overheat Warning
Slot Openings: 7
Cooling Fan: Standard: 5 x 80 mm middle hot swap fans
                                        2 x 80 mm Rear fans
Construction Material: SGCC
Sheet Metal Thickness: 1.2mm
Net Weight 18.7 Kg(41.2lbs)

Front Bezel Optional

DSPC-41416B Chenbro Black 4U 19" Rack-mount Chassis for ATX/EATX motherbaord,
Internal bays:  1x 5.25", 1x 3.5" ,
External bays: 1x slim CD-ROM, 1xFDD Bays, 16x1" HDD Trays,
5 x 8cm Hot Swap Cooling Fans, 2 USB Ports and LED Display, 19" x 4U x 660mm deep   $764+GST    11/06
Options (not included): 2x80mm rear fan option, PSU option, Slide rail kit option

Options:
DSPC-41416SATA  16 Port SAS/SATA II backplane $438
DSPC-41416SCA    16 Port SCSI backplane $674
PS-6800PSL            Zippy 800W EPS12V 24+8+4pin PS2 PSU, +12V:60A, 4xSATA, 2xPCI-E connectors $563
PSR-5700MX3       Zippy 700W EPS12V Redundant PSU 24+8+4pin for CSSV-107NB, +12V:52A $863
DSPC-PB9               Power Bracket with PSR-5700MX3 $15
PSR-5800R3G        Zippy 800W EPS12V 24+8+4pin Redundant PSU, +12V:49A, +5VSB:4A $932.00
DSPC-SLIDE2U      24" Slide rail kit $87
CPUF-SKT0159     Nocona Xeon 800MHz CPU mounting pad for Supermicro/Tyan CEB sized boards $15
CPUF-SKT107       Nocona Xeon 800MHz CPU mounting pad for Intel 7320SP2/7525GP2/Supermicro/Tyan CEB sized boards $15
CASE-FAN8           80x80x25mm Ball Bearing Fan $32

DSPC-414AB Black Chenbro - no longer made, see items above

     For Power Supplies and optional Slide Rails, see just below 4U cases 


4U Cases ctd.

IPC-C4S   4U Case

1 x 3.5" and 3 x 5.25" drive bay exposed     Picture      IPC-C4S data   obh   
up to 4 x 3.5" drive bay internal for ATX mboard,
     or 1 x 3.5" drive bay internal for backplane
2 x 90mm ball bearing cooling fan at front
One thumb screw to open top cover (Patented)
M/B version: 12"x 13" ATX M/B with notch cutout or 8-slot AT M/B
PSU : 250W/300W AT, or 300W ATX, or 250W/300 Hot-Swap Redundant PSU
Dimensions: 19" x 4U x 508mm deep (19" x7" x 20") (W x H x D)
Heavy-duty cold-rolled steel. Inside: zinc-plated with bright chromate. Outside: texture-coated
       IPC-C4S   4U Case:  $295+GST       6/06

4U  19" Rackmount Case, very deep

R430 for Extended P4 ATX Mainboard 12 x 13"

  Data sheet for R430: click here (.pdf file)     bnlo

 

Motherboard configuration Baby AT / ATX / Extended ATX ( 12"x 13" ) / 8-14 slots Passive Backplane { 8-14(option)}
Drive configuration 9 x 5.25" exposed
(could be installed 15*HDD hot-swap enclosure module, option)
1 x 3.5" exposed
Detachable & shock resistant drive bracket

Built in system cooling fan: 3 x 12cm(86CFM)Ball Bearing Fan

Number of slots ATX : 7slots
Patented adjustable card hold-down clamp protecting plug-in cards against vibration (Pat.2L99215622.X)

Speaker 0.4W,8 audio speaker

Controls: Power switch, Reset switch,   Power on LED, HDD LED, Alarm LED (Could be defined by system integrator)

Case dimensions: 19" x 4U x 678mm deep

R430 without power supply, beige colour: $515+GST

300W power supply for above: $95+GST
400W power supply for above: $150+GST

PIST1040 Dual Redundant 400W $695+GST     

Power Supply: Single ATX 300W~600Wl N+
Redundant Hot-Swap 450W~675W
UL, CSA, , CE approved, DoC compliance, PFC option
MTBF :30,000 hours

Construction Materials Recyclable materials
Hardened Aluminum alloy handle; Heavy-duty steel Chassis CGI
EMI CE/FCC compliant

Operation temperature:0 to 50°C)
Net Weight (w/o power) 14.5kg/31.9lbs
Gross Weight (w/o power) 16.5kg/36.3lbs
Packing Strengthen carton Box with EPE foam
Color Cool gray, Black (option)

Options Rear window for 8-14slots passive backplane
Telescopic slider 28"
6cm cooling fan, rear mounted
Volume of container 4.3cuft/each carton
235pcs/20'container    470pcs/40'container

 

Industrial grade cases
          see Advantech Cases (separate page)


Power Supplies        Prices do not include GST

Screws:
Power supply and HD:    Four 6-32 UNC screws are required. These have a coarser thread than M3 screws.
Expansion slot cards, floppy disc drives and CD drives require M3 screws. M3 has a finer thread than the UNC 6-32

     "Zippy" and "Enhance" are very good quality makes of power supplies.

Some power supplies have EPS12V connectors (24+8pins) (suitable for dual CPU mainboards) instead of ATX (20+4pins).
An adaptor EPS12V to ATX can be supplied on request for $12+GST, for use with ATX mainboards (20+4pins).       chfb

These power supplies are designed for use in Rackmount cases ... reliability is better, and the leads are longer than with standard power supplies for desktop computers.

Prices shown are for ordering with a case.  For separate orders, add $15+GST.     Prices do not include GST.

Slim Power Supply      11/06
PS-6460P        Zippy Slim 460W EPS12V 24+8pin Power for 2U & 3U, +12V:32A $207+GST     11/06
PS-6600P2M  Zippy Slim 600W EPS12V 24+8+4pin Power for 2U & 3U, +12V: 42A, Power bracket needed, While Stock Last $325
PS-6601P2M  Zippy Slim 600W EPS12V 24+8pin PSU, +12V: 48A, +5VSB:4A, Power bracket needed $369
PS-6700P2L   Zippy Slim 700W EPS12V 24+8+4pin PSU for DSPC-823B, +12V:40A, While Stock Last $369
Power Bracket Option
DSPC-PB1         Power Bracket for 2U with PS-0748/PS-6460P/PS-6600P2M $15
DSPC-PB312P  Power Bracket for DSPC-312AB with PS-6601P2M $15
DSPC-PB4         Power Bracket for 3U with PS-0748/6460P/6600P2M/6601P2M $15

Standard PS2 Power Supply     11/06
PS-5240G     Enhance 400W ATX12V 24+4pin PS2 PSU with 12cm fan, +12V1:14A, +12V2:15A, 2xSATA & 1xPCI-E connector $69
PS-5140GH  Enhance 400W 24+8pin PS2 SuperQuiet ATX12V ver2.2 80 PLUS high efficiency PSU,
                                                           +12V1:16A, +12V2:18A, +5VSB:3A, 2xPCI-E connector $107
PS-5150F      Enhance 500W Intel Approved ATX12V 24+4pin PS2 PSU for Pentium D CPU,
                                                            +12V1:18A, +12V2:18A, 2xSATA & 1xPCI-E connector $100
PS-5150GH  Enhance 500W 24+8pin PS2 SuperQuiet ATX12V rev2.2 80 PLUS high efficiency PSU,
                                                            +12V1:18A, +12V2:18A, +5VSB:3A, 2xPCI-E connector $120
PS-0565   Enhance 650W EPS12V 24+8pin PSU, +12V1:13A, +12V2:18A, +12V3:16A, +12V4:8A, support Xeon 800MHz CPU $199
PS-0060   Supermicro 645W EPS12V 24+8+4pin PS2 Low Noise PSU, +12V:46A,+5VSB:4A $307
PS-6701PSL   Zippy 700W Intel approved EPS12V 24+8+4pin Power Supply, +12V:45A, support Xeon 800MHz CPU, till stock sold $394
PS-6720PSL   Zippy 720W EPS12V 24+8+4pin PS2 PSU, +12V:52A,+5VSB:3.5A $419
PS-0575           Enhance 750W EPS12V V2.8 24+8+4pin PSU, +12V1:18A, +12V2:18A, +12V3:18A, +12V4:18A, +5VSB 3.5A, support Xeon 5000/5100 CPU $388
PS-6800PSL    Zippy 800W EPS12V 24+8+4pin PS2 PSU, +12V:60A,+5VSB:3.5A, 4xSATA, 2xPCI-E connectors $563

Redundant Power Supply    11/06
PSR-6460P      Zippy 460W Slim EPS12V 24+8+4pin 2U/3U Redundant Power Supply, +12V: 32A, WxHxD (101x84x300mm), power brackets may be required to be fitted into chassis $744
PSR-6460P2    Zippy 460W EPS12V 24+8+4pin Redundant Power Supply for CSSV-103B only, WxHxD(153.4x213.2x183mm), power brackets may be required to be fitted into chassis $563
PSR-6460MRG  Zippy 460W EPS12V 24+8+4pin Mini Redundant PSU for P4/PD system, +12V:32A, WxHxD(150x86x200mm) $624
PSR-500 500W Slim Redundant EPS12V 24+8pin power for DSPC-823B $938
PSR-5600R2W  Zippy 600W EPS12V 24+8+4pin 2U/3U Redundant power, +12V:42A, WxHxD(101x84x300mm), power bracket may be required to be fitted into chassis $938
PSR-5650M1L2  Zippy 650W EPS12V 24+8+4pin 2U Redundant power, +12V:45A, +5VSB: 3A, WxHxD(101x84x330mm), power bracket required $975
PSR-6650MRM  Zippy 650W EPS12V 24+8+4pin Mini Redundant power, +12V:48A, +5VSB: 3.5A, WxHxD(150x84x254mm) $800
PSR-6650R3G    Zippy 650W EPS12V 24+8+4pin N+1Redundant Power Supply, +12V:40A, WxHxD (127x82x300mm), power brackets may be required to be fitted into chassis $775
PSR-5700MX3  Zippy 700W EPS12V 24+8+4pin Redundant PSU, +12V:52A, WxHxD (150x84x265mm), power brackets may be required to be fitted into chassis, While Stock Last $863
PSR-5750MX3  Zippy 750W EPS12V 24+8+4pin Redundant PSU, +12V:56A, +5VSB:3.5A, WxHxD (150x84x265mm), power brackets may be required to be fitted into chassis $900
PSR-5800R3G    Zippy 800W EPS12V 24+8+4pin Redundant PSU, +12V:49A, +5VSB:4A $932
PSR-6760M1Z3 Zippy 760W EPS12V 24+8pin 3U Redundant PSU, +12V:50A, Power bracket needed, While Stock Last $1,032
PSR-PWS0050   Supermicro 760W EPS12V 24+8+4pin Redundant PSU, +12V:50A, +5VSB:4A, Back to Back order $925

Power Bracket Option
DSPC-PB2 Power Bracket for 2U with PSR-6460P/PSR-5600R2W $15
DSPC-PB3 Power Bracket for 3U with PSR-6460P/PSR-5600R2W $15
DSPC-312R Power Bracket for DSPC312AB with PSR-6760M1Z3 $15
DSPC-PB7 Power Bracket for DSPC-411B with PSR-6650R3G $15
DSPC-PB9 Power Bracket for DSPC-41416B with PSR-5700MX3 $15
CSSV-PB4 Power Bracket for CSSV-107B with PSR-6650/6800R3G $15

EPS12V connectors 24+8pin (suitable for dual CPU mainboards).
An adaptor EPS12V to ATX can be supplied on request for $12+GST, for use with ATX mainboards 20+4pin.

   Zippy Redundant Power Supplies 400W - 550W    Data on PSR-6460P2 (= Zippy RHD-6460P)

Slide Rails for Rack Mount Cases

Prices shown in the table below apply when the cooler is ordered with a case.  GST not included. 

 

Sliding Rail

 

DSPC-SLIDE

18" Drawer Slide for DSPC-4400/B, length 457.2mm

 

DSPC-SLIDE22

22" Drawer Slide for sliding in/out from cabinet for DSPC-222

 

DSPC-SLIDE24

24" Drawer Slide for sliding in/out from cabinet for DSPC-4500, length 609.6mm

 

DSPC-SLIDE1U

24" Drawer Slide for sliding in/out for DSPC-1000, DSPC-2100V1, DSPC-3000 serial

 

DSPC-SLIDE261U

26" Drawer Slide for sliding in/out from cabinet for DSPC-118B & DSPC-123B

 

DSPC-SLIDE2U

24" Drawer Slide for sliding in/out from cabinet for DSPC-214B

 

DSPC-SLIDE26

26" Drawer Slide for sliding in/out from cabinet for DSPC-311B & DSPC-411B

 

DSPC-SLIDE28

28" Drawer Slide for sliding in/out from cabinet for DSPC-115B

 

3U Cases

For 3U cases with connectors at rear click here


2U Cases 

For 2U Cases with connectors at rear  click here  (DSPC-223B, DSPC-217B, DSPC-823B)

There is also a case, IPC-603, which has all the connectors at the front (same page):  click here

  Power Supplies for rack-mount cases: click here   (this page)



Low height computers
suitable for rack mounting on a shelf

Slim PCs   Low height, slim PCs: click here


External Drive Cases: click here


See separate page for Advantech Industrial quality cases.

Includes cases for ATX mainboards and also for passive backplanes (with plug-in cards)

 

Pentium 4 uses 1.7 volts (around 55 W), and also requires a new kind of power supply that ensures the delivery of 10-12 A from the 12V line.
Two additional power connectors are provided for plugging into the motherboard.

Pentium 4 heat sinks are supposed to be mounted through four holes around the Socket 423 right through to the computer case, thus avoiding any possible damage to the socket or motherboard. This will require new cases in many occasions.

Pentium 4 processors that run at 1.6 GHz and more require their heat sinks to be grounded (connected to Vss) to avoid EMI. To ensure this board makers have to place ground pads around the mounting holes of the heat sink

Power Supply PS-300ATX (ATX):

Outputs:
+5V@30A,
+3.3V@26A (Max.220W for +5 & 3.3V) ;
+12V@13A ; -12V@0.8A ;
-5V@0.5A (Max. 0.8A for - 12V & -5V) ;
+5VSB @2A

Power Supply PS-250X-DPS   (ATX Ver. 2.01)

Maximum output: 260W, Input: 110/220 VAC
Outputs:
+5V@25A,
+3.3V@14A,
+12V@8A, -12V@0.8A,
-5V@0.5A,
+5VSB@1A
Mini-load: +5V@1.5A, +12V@0.2A
MTBF: 50,000 hours.  
Safety: UL/CSA/TÜV/CE approved

Slide rails for IPC-610 :      


Axiomtek cases - click here (Axiomtek website) for a range of 19" rack mounting, and smaller cases ngl

Esis Pty Ltd - Australia - Ph 02 9481 7420  Fax 02 9481 7267  www.esis.com.au 
E-mail: click here       Go to Esis main page