This
compact double scan converter box, converts the interlaced video (NTSC/PAL) signal
into a non- interlaced VGA signal for CRT monitors or LCD panels.User friendly with simple 'plug and play' operation, no software installation is required.
Prices are in Australian dollars, do not include GST and may change without notice.
| It is best to install the driver software before you install the actual hardware 1. Reboot
the computer | If you installed the card before installing the drivers: 1. Uninstall
the driver, power off, remove the card. |
High
quality at an affordable price, this totally external unit does not require software
drivers, hence, no software clashes.
It supports resolution up to 1024 x 768
with a refresh rate of 85Hz.
The bigger the screen the better! Play with your
friends and view the action in wide screen format. Visuals are better and sharper
thanks to the SIX-LINE buffer technology for sharp, flicker-free TV display with
resolutions of up to 1024 x 768 and in 16 million glorious colors! Here’s
a way to turn those games of yours into a feast for your eyes! Record your games
to your VCR and have a souvenir and review what moves your opponent used against
you. With the AVerKey Pro you’re the master gamer!
Watch your DVD movies
come alive in a large screen TV. Now instead of crowding around your computer
you can sit back and relax with your family and watch your favorite DVD movies.
Get your ideas across more effectively by giving your clients the big picture.
In displaying your presentation on TV you need not worry if they have a projector
or not.
• Input Signal: Standard VGA signal
• Horizontal frequency:
68.7KHz • Vertical frequency: 85Hz
• Output
Signal: Composite video, S-Video, VGA pass-thru output
• Power Supply:
7.5V Power Adapter • Dimensions: 17.8 x 13 x 2.2cm
• Weight: 1 lb. (454 grams)
M3138
PC SVGA to TV Converter: $198+GST
This
compact double scan converter box, converts the interlaced video (NTSC/PAL) signal
into a non- interlaced VGA signal for CRT monitors or LCD panels.
User friendly
with simple 'plug and play' operation, no software installation is required.
Features include a slim line remote control so you'll be able to adjust the brightness, contrast, colour, hue and even switch between devices.
Supports: NTSC M/N,
PAL M/N, PAL and NTSC 4.43
Input: Composite video, S-video, and VGA
Output:
VGA
Speaker amp: .6W into 8ohms
Dimensions: 95(D) x 55(W) x30(H)mm Power
supply: 6V 800mA
M3618 Video
to VGA Converter - LCD & CRT compatible: $222+GST
M15090
Dual Mouse Adapter - PS/2 Use two pointing devices
on one PC. (PC or MAC)
The dual mouse adapter allows the simultaneous
connection of two compatible pointing devices, such as standard mice and trackballs.
Connects to computer via a PS/2 port.
Movement
of the device causes the automatic switching. In normal operating mode either
“mouse” can control the pointer.
The first device to move or click retains
control until it pauses, at which point either device can gain control.
Accommodates
right and left-handed users by placing mice on both sides of a computer
Switching
between devices helps avoid repetitive motion problems
Daisy chain to attach
even more pointing devices at a time
The PS/2 Y-mouse also supports most scrolling
mice.
The Y-mouse Dual PS/2 Mouse Adapter Port works with all systems that
support a PS/2 mouse.
Both devices need to use similar mouse protocol.
Trackballs, Touch pads and Mice are all relative coordinate devices that use similar
mouse protocol.
Operating System: All systems compatible with PS/2 mice
Various modes of operation may be set by holding down the Esc key then tapping
a letter key.
e.g. Esc e stops the USB power off feature so that
mouse or keyboard can wake the computer
Connectors: Two 6 pin PS/2 sockets,
one 6 pin PS/2 plug (mini DIN 6)
Dimensions: 4" x 2.5" x .75",
100 mm x 63 mm x 20 mm without cord. Weight: 60 grams
Power Consumption: Less
than 15 ma @ 5 vdc with 2 mice. Power Source: Directly from PS/2 mouse port
Nominal Voltage: 5 VDC. Certification: FCC class B, CE Tech
Support M15090: $160+GST 2/07
M15097 similar to above, for serial mouses $160
Allows
the simultaneous connection of two keyboards from one keyboard port.
Connect a specialised keyboard, eg POS, or child's keyboard, and a standard keyboard
at the same time,
or a computer that requires input from two locations.
The adapter can be daisy chained to provide several keyboard ports from one PC
keyboard port.
Most keyboards draw about 40mA, but in rare cases they can
draw up to 175mA, so for this reason, it is not recommended connecting more than
3 or 4 keyboards. The current carrying capacity of the keyboard port should be
determined before connecting multiple keyboards to the adapter. Works will all
operating systems without drivers.
Manufacturers
web site Adapters for AT included. M15091:
$135+GST 2/07
Turn your Notebook into
a desktop with one simple connection.
Allows the simultaneous connection
of a PS/2 keyboard and a PS/2 mouse to a single PS/2 port.
The USB device
above is suitable for these systems.
M15093 for Win 95 & Win
98 only: $50+GST 2/07
M15121 for Win ME/2000/XP only: $55+GST
Please enquire.
SXP-320 Serial to parallel or parallel to serial interface converter
• Serial to Parallel or Parallel to Serial Larger
picture
• DIP Switch for Direction
Setting
• 300 - 38400 bps Baud Rate
•
Hardware handshaking or XON/XOFF
• 1 x RS-232 DCE DB25 female connector
• 1 x Centronics 36 pin male connector
• Compact Size and Lightweight
Data
& prices: click here
Other Converters (serial/ parallel/ buffers/ printer sharers, etc): click here
The cable allows you
to connect two computers with USB ports and instantly transfer files
using
PC-Linq ("Norton Commander" type software) via a split window system.
Click here
M4059 9" Monochrome VGA monitor,
white phosphor. Data: click here
$315+GST
8/08
Ideal for POS applications or where a small footprint is required. Provides 640 x 480 resolution.
Jump to USB Hubs & USB Converters, etc (USB to Parallel, Serial or Ethernet Converters)
Jump to Cases for External Drives (USB, Firewire IEEE 1394, Parallel port, SCSI)
Hot
Swap HD drive Frames - click
here for items below (jumps to different page)M2812 HDD Controller IDE Raid - Spare Frame Click here for these items (jumps to different page)
M2857 Easy
Transfer Board - Universal Front Access Bay Utilises a
3.5 in bay to provide front access for the following ports:
2 x USB, 1 x
Firewire, 1 x Audio In, 1 x Audio Out, 1 x Serial
Includes cables to make
connection to your existing rear access ports. Data:
click here $75+GST 8/08
TV Tuners, frame grabbers, etc jump to the USB page: click here
This Video Signal Conditioner is designed to fit between a VCR/DVD
player and VCR and will allow copies to be made even when the player signal has
been encoded. It is useful for home Video Record backup.
Composite Video
connectors.
M3551 Video Signal Conditioner
VHS/DVD: $199+GST 8/08
An up-market surveillance camera that
can connect to your network via wireless LAN or UTP cable.
It has an IP address
which allows it to be accessed by any web browser.
M3475
Surveillance Camera - Wireless with IP address: $605+GST 8/08
An
economical model with just a UTP connection is also available.
If you already
have a camera it can be connected to a video server to allow remote viewing via
a web browser.
Give all stations on your network simultaneous access to the internet
through this access server.
Hardware based firewall ensures your security,
while dial on demand minimises your connect time.
It has a built in DHCP
server and includes software to provide clients with their own email address.
M10104: $260+GST 8/08
Prices (Australian dollars) do not include GST and may change without notice
Transmits up to 3m. Transfer
rates from 2400 to 115200bps. Win95 compatible.
Wireless file management
and print software included
For a computer without an IRport, use the M8923 with USB port
Ideal for use with mobile phones etc.
It is suitable for computers without a built-in IrDA port, the adapter easily
connects to any USB port.
Data transfer rates of 115,200 bps (SIR) and 4Mbps
(FIR) are supported. A USB connecting cable is included.
Full compliance
with USB v1.1 and IrDA v1.1 Supports external IrDA v1.2 compliant
PHY
Full speed USB device operation at 12Mbps data rate
¨ Bus-powered
configuration supports multiple level of power saving modes (On, Stand-by and
Suspend)
¨ Supports SIR and FIR from 115Kbps to 4Mbps data transfer rate
¨ Windows 98/2000/ME/XP Compatible
¨ Supports compliant Mobile Phones
including; Motorola: L series, Nokia: 7110, 8210, 8850, Ericsson: 8 Series, Siemens:
S25 Series
Dimensions: 80mm long, 73mm wde at front, 40mm high at front. M8923
data Download software
Supplied:
USB – IrDA Infra Red Link Device, USB – IrDA Converter Driver, USB –
IrDA User’s Manual
M8923 Infra
Red Link - USB Connection: $95+GST 8/08
For computers with a built-in IR port on motherboard (5 or 4 pin), use M8518 (IrJet 5000 Serial Link),
M8518
for computers with built-in IR port headerCompact,
wireless and lightweight, transfer data easily and quickly between a personal
computer (desktop, notebook), printer, PDA, handy terminal, cellular phone and
pager.
This model is for computers with built-in IR port connector on
the mainboard, it easily connects to the header on compatible motherboards
and provides a connection to the infra-red head via a back plane plug.
Transmit
files at a distance up to 2m and supports a data transfer rate of up to 115,200
bps.
Most file management software is supported and it is Win 95/98 compatible. ACT-IR210L
M8518 data
M8518 Infra Red Link - Motherboard Connection: $88+GST
8/08
VGA Extension
Cable M9073 VGA Extension cable,
two metre Picture of M9073
with HD 15-pin male connector and five BNC connectors $60+GST
($66 inc GST) 5/05
The above may
be extended with:
M9083 VGA Extension Cable, 15m
shielded,
extension grade (=good), VGA high density15-pin male to female connectors $95+GST
5/05
MA59x with Record & Playback. The MA59x is an intelligent stand-alone 16-bit sound card that combines recording and playback with control functions. Can play messages in response to trigger inputs, etc. Please enquire. lhbqnbnm
Join two ethernet networks with a spread spectrum radio link. Please enquire.
Multi Mode Fibre with 2km range bza
Convert
fibre optic to UTP or vice versa in minutes without adding new equipment, re-configuring
existing equipment or re-wiring your network.
This 100Mbps Fast Ethernet
Media converter comes with one UTP connection (with two RJ45 connectors) that
allow you to connect to a 100Base-TX device such as a workstation, hub or switch
and one multimode fibre connection that allows you to connect a 100Base-FX
device.
(Call for single mode models with 15km, 30km and 50km range). Data:
click here
CMCMM-SC Ethernet
100Base-TX to Fibre Optic with SC connector:
$166+GST 11/07
CMCMM-ST Ethernet 100Base-TX to
Fibre Optic with ST connector: $166+GST
Single Mode Fibre bza
• Convert ethernet media
• Status LEDs
•
External power adaptor
• 10/100Base TX to 100Base-FX (SC/ST)
Single
Mode Fibre with 20km range
CMC20SM-SC Media Converter RJ45-SC 10/100Mb
S/M 20km: $224+GST 11/07
CMC20SM-ST Media Converter
RJ45-ST 10/100Mb S/M 20km: $224+GST
Single Mode Fibre with 60km
range
CMC60SM-SC Media Convert RJ45-SC 10/100Mb S/M 60KM $315+GST
CMC60SM-ST
Media Convert RJ45-ST 10/100Mb S/M 60KM $315+GST
Media
Convertor Chassis bza
• 19" rackmounted chassis
• 12 positions for
module media convertor
• Dual power supply for redundancy
• Dual
fans for ventilation
• Compact size, hot-swappable
• Easy installation,
stable performance
Suitable For: Connector Mode Max.
Distance
CMCMM-SC SC Multi-Mode 2km
CMCMM-ST ST Multi-Mode 2km
CMC20SM-SC SC Single-Mode 20km
CMC20SM-ST ST
Single-Mode 20km
CMC60SM-SC SC Single-Mode 60km
CMC60SM-ST ST Single-Mode 60km
CMCMMC
Media Converter Chassis: $900+GST
Smart Web I/O Modules - ADAM-6000 Smart
Web I/O Modules are industrial-grade Ethernet hub/switch/IO for Ethernet networking
solutions in Industrial Automation environments.
It allows users to expand
their industrial networks fast and cost-effectively. Jump
to ADAM 6000 page
ADAM-6541/ST-AE and ADAM-6541-AE Multi-mode fibre to 10/100 ethernet converters
ADAM-6542/W13 and /W15 Single strand WDM fibres (2 models do Tx and Rx at opposite wavelengths)
More information on ADAM-6500 Series: click here
The Remote Device Activator allows one
or two electrical appliance to be switched on or off by using your normal telephone
line.
Data:
click here mzs
The remote
device activator has been specifically designed to allow ONE or TWO PC's, Networks
or ANY electrical appliances
to be SWITCHED ON, SWITCHED OFF, or RESET by using
your normal telephone line. Two models are available. Cat.
M19002
provides ONE output, which can be used to control ONE device. Cat. 19005 provides
TWO independent outputs, which
can be used to independently control TWO separate
devices.
The outputs from these device activators are used to directly control,
and require the use of ONE M19002 or TWO M19005 of the following accessories:
*
240V Power Relay M19003)
* Power Control Unit M19004)
* PC Reset Unit M19006)
The
240V Power Relay provides for safe connection or disconnection of your 240VAC
electrical supply to your equipment, when used in conjunction with a remote device
activator.
The relay can be set so that your 240VAC supply is always ON,
unless commanded by the remote device activator to turn OFF, or set so that your
240V AC supply is always OFF, unless commanded by the remote device activator
to turn ON.
The relay is controlled by a 12-24VAC or 12-24VDC output from
the remote activator device.
A qualified electrician must install the relay.
The 12- 24VAC or 12-24VDC source (not supplied) must be connected firstly to the
remote activator device and then to the 240V Power Relay.
The 240V Power Control Unit provides for safe connection or disconnection of your 240VAC electrical supply to your equipment, when used in conjunction with a remote activator device. It is designed as a quick & easy USER PLUG IN SOLUTION. This device contains a 240V Power Relay, a normally ON or normally OFF toggle switch, and a 12VAC supply, all in a safe, convenient and approved plug in package.
The PC Reset Unit provides for a remote RESET of your PC by telephone, when used in conjunction with a remote activator device. It is designed as a USER INSTALLABLE SOLUTION. The PC Reset Unit, whichconnects to an expansion slot at the rear of your PC, provides for a convenient interface from a RemoteDevice Activator and the RESET CONNECTION of your motherboard.
M19002 with one output:
$278+GST 8/08
M19005 with two outputs:
$267+GST
M19003 240V Power Relay
for Remote Device Activator, with M19002/5: $48+GST
when purchased with M19002 or 5
The 240V Power Relay provides for safe
connection or disconnection of your 240VAC electrical supply to your equipment,
when used in conjunction with a remote device activator.
The relay can be
set so that your 240VAC supply is always ON, unless commanded by the remote device
activator to turn OFF,
or set so that your 240V AC supply is always OFF,
unless commanded by the remote device activator to turn ON.
The relay is
controlled by a 12-24VAC or 12-24VDC output from the remote activator device above.
A qualified electrician must install the relay.
The 12- 24VAC or 12-24VDC
source (not supplied) must be connected firstly to the remote activator device
and then to the 240V Power Relay.
M19004 Power Control
Unit for Remote Device Activator: $127+GST when purchased with M19002
or 5
The 240V Power Control Unit provides for safe connection or disconnection
of your 240VAC electrical supply to your equipment, when used in conjunction with
a remote activator device.
It is designed as a quick & easy USER PLUG
IN SOLUTION.
This device contains a 240V Power Relay, a normally ON or normally
OFF toggle switch,
and a 12VAC supply, all in a safe, convenient and approved
plug in package.
M19006 PC Reset
Unit for Remote Device Activator, with M19002/5: $59+GST
when purchased with M19002 or 5
The PC Reset Unit provides for a remote RESET
of your PC by telephone, when used in conjunction with a remote activator device.
It is designed as a USER INSTALLABLE SOLUTION.
The PC Reset Unit, which
connects to an expansion slot at the rear of your PC,
provides for a convenient
interface from a Remote Device Activator and the RESET CONNECTION of your motherboard.
Authentication using fingerprints
achieves higher security and greater convenience than conventional passwords.
The user simply places his/her finger on the reader and waits briefly for authentication
- less than one second.
The module connects via a USB 2.0 port and is complete
with software for Win 98SE/ME/2000/XP.
Intergrates into the windows login
and allows for account managment
• Screen Saver Protection.
•
Advanced Setting.
• Logon Protection.
• Time Limit Control.
Network Interface USB V2.0
Fingerprint Sensor CMOS Reader Fingerprint Sensor
Capture Area 13 x 13mm
Image Capture Time 8 frames/sec. Picture:
click here
Verification Time < 1 sec.
Dimensions 8.0 (L) X
4.5 (W) X 3.5 (H) cm
M9237 Finger Print Reader for Secure
Access to PC: $184+GST 8/08
This simulator allows a telephone,
answering machine, modem, fax machine, security dialer or any other telephone
device to connect to either or both ports of the simulator. szl
It is commonly used for testing and demonstration of all types
of telephone devices in training and exhibitions, etc, without the cost of connecting
to a telephone line.
Can also be used for tie line connections over distances
up to 2 km. Brief Data
Produces 'dial tone' and 'busy tone' and has all seven distinctive ring patterns
that are planned for use in Australia.
RingMaster Pro model produces
Australian Dial Tone, Busy Tone and can output all 8 Distinctive Ring Patterns
Data sheet
Telephone Line Simulator - Ring Master Pro: $350+GST
8/06
Provides all facilities of the PRO model and in addition will generate
Caller ID (Calling Number Display) output in conjunction with any Telstra ring
pattern. Provides 10 preset outputs, plus Alphanumeric & user definable transmissions.
szl
Data
sheet Telephone Line Simulator - Ringmaster
CLI: $465+GST 8/06
RingMaster Standard – does not simulate dial tone or distinctive rings $250+GST 8/06
National Communications Line Sharers have been supplied throughout Australia since 1990 and as a result they have achieved a reputation for exceptional reliability and performance. They have been tested, approved and are recommended by nearly all major FAX and MODEM manufacturers operating in Australia. All products are supplied with a Two Year Warranty and an unconditional 30 Day Money Back Guarantee.
Data: click here (.pdf file) Similar to Critec Surge protectors
• DIN43880 case, DIN-rail mountable mor
m o r
• High
surge current starting from 40,000 Amps (40KA - 8/20uS). 40kA units will
withstand 20 hits at 15kA
• 120kA units will withstand 20 hits at 45kA
• Can be paralleled for higher ratings or to extend operating lifetime
• Does not require resetting
• PW-VSD3-3 phase unit in 61mm width
(3.5 DIN units)
• PW-VSD1, PW-VSD3 provide common-mode protection for
circuits remote from M.E.N.
• PW-VSD3R, PWVSD120R units include alarm
contacts for connection to PLC’s or building management systems
•
Australian designed and manufactured with 12 Month Warranty
PW-VSD1 40kA x 2 times (L-N), 80kA x 2 times (N-E)
PW-VSD120 120kA x 2 times
PW-VSD3. 40kA x 2 times (L-N), 40kA x 2 times (N-E)
TW CAT 5 NTP RJ45 Surge Protector for RJ45 for 1: $90+GST, for 2-4: $80+GST, for 5+: $75+GST
Other surge protectors: please enquire
