| Printer
port -
Parallel printer
port cards FireWire IEEE1394 cards jumps to Firewire page
IR
- Infra Red i/f jumps
to Ext Accessories page | Video
Capture - Frame Grabbers |
Hard
Disk Controllers - IDE - SCSI |
| It is best to install the driver software before you install the actual hardware 1. Reboot
the computer | If you installed the card before installing the drivers: 1. Uninstall
the driver, power off, remove the card. |
Driver
Guide website for downloading hundreds of thousands of driver/firmware
files, manufacturer information, and links.
Provides
6 ISA bus slots external to the computer. Interface cards may be inserted &
removed without switching off the computer.
With protection. Ideal for QC
testing, teaching, prototype development, etc.
Mounted in a small metal case.
Data: click here M3053: $330+GST
MA59x with Record & Playback. The MA59x is an intelligent stand-alone 16-bit sound card that combines recording and playback with control functions. Can play messages in response to trigger inputs, etc. Please enquire.
Suitable for 32 bit and 64 bit PCI BUS.
Has 2 x 9 pin 1394B FireWire connectors,
and one 6 pin 1394A legacy connectors on the back plane.
M2998
FireWireB PCI bus: $115+GST 9/06
- Pinnacle Studio 10 PLUS with Internal PCI
Card lls Pinnacle
product data
- Copy the contents of your Hi-8, VHS, SVHS to PC
- Import MPEG-1, MPEG-2, AVI, WAV, MP3 Files
Hardware
Specifications
Inputs
Breakout Box with:
Composite video
input (RCA connector) PAL, SECAM, NTSC
S-Video input (mini-DIN connector)
PAL, SECAM, NTSC
Stereo audio input (2 x RCA connectors)
IEEE 1394 I/O
connector (6-pin type)
Outputs
Breakout Box with :
Composite
video output (RCA connector) PAL, NTSC
S-Video output (mini-DIN connector)
PAL, NTSC
Stereo audio output (2 x RCA connectors)
IEEE 1394 I/O connector
(6-pin type) Full
Specs of this product
25P-700INT-V10 Pinnacle Studio 10 700 - with PCI card: $385+GST 10/05
Turns your PC into a television and an FM radio. Includes an IR
Remote Controller.
You can watch TV programs in a window while you are working
in other applications or switch to full screen TV display.
The remote controller
allows you to switch between PC mode and TV mode, adjust the channel, volume &
more.
You can capture still frames and movie clips, channel surf, or create
your own TV transcripts. Composite video and S-Video inputs support VCRs, video
cameras, laser-disc players, video game consoles, etc.
Still image and live
video capturing is easy with a simple mouse click.
View multiple video sources
on your VGA monitor at up to 25 frames per second. Win98SE or higher. $115+GST 9/06
Scan, capture, edit and print to tape your digital video data using your DV camcorder and your PC! 100% IEEE 1394 compatible, SONY's optimized CODEC technology for quality & performance. $895+GST 9/06
M3399 TV
Capture, with Remote Control Unit - PCI BusTurns
your PC into a television with an IR Remote Controller.
You can watch TV
programs in a window while you are working in other applications or switch to
full screen TV display.
The remote controller allows you to switch between
PC mode and TV mode, adjust the channel, volume & more.
You can capture
still frames and movie clips, channel surf, or create your own TV transcripts.
Composite video and S-Video inputs support VCRs, video cameras, laser-disc
players, video game consoles, etc.
Still image and live video capturing is
easy with a simple mouse click.
View multiple video sources on your VGA monitor
at up to 30 frames per second.
Watch TV programs on
your PC
Watch VCR, MPEG movies (VCD), LD movies
Resizeable TV window from
Icon Size to Full Screen
16-Channel preview function
Mute function
Full screen (up to 640 x 480) capture capability. Windows 95/98/2000, NT4.0,
Win XP
Package Contents: PV951 Tuner/Capture Card, Bundled Multimedia
CD title (Drivers & Capture Utility),
Remote Controller & cable, Audio cable
M3399 TV Capture: $95+GST
9/06
If your application program locks up, this card will apply a
hardware reset to the computer after a selectable period.
This is done
by writing to the card base address to reset the internal counter.
This is
usually done in the main loop of your program.
Utility software is included
for DOS, Windows 3.1/95/NT, OS/2 and UNIX.
For full details and software
see www.pciwatchdog.com Data
on M17070: click here $280+GST 3/07
If your application
program locks up, this card will turn the power to the computer off and on
after a selectable period.
This is done by writing to the card base address
to reset the internal counter.
This is usually done in the main loop of your
program.
Utility software is included for DOS, Windows 3.1/95/NT, OS/ 2 and
UNIX.
For full details and software see www.pciwatchdog.com
$590+GST 3/07
Software selectable
timeout: 10µs to 4800s hmsq
Relay output & reset line output
Half-size, AT compatible
Optional temperature Monitor/alarm, fan speed detect, & buzzer
Windows
95/98/NT supported
Plus more!
With software, manual $570+GST
PCI-WDT501 Multifunction Watchdog Timer Card with options, software, manual $795+GST
If your application program locks up, this card will apply a hardware reset to the computer after a selectable period (62msec to 64 seconds). This is done by writing to the card base address to reset the internal counter. This is usually done in the main loop of your program.
Utility software is included for DOS,
Windows 3.1/95/NT, OS/2 & Unix. The card Base address is selectable by jumper.
The computers RESET button can be connected to this card, and the card is then
connected to the motherboard's Reset pins.
WatchDog Timer
Card M17044: $165+GST 9/06 Data:
click here
If your application program locks up, this
card will turn off the power to the computer after a selectable period.
This is done by writing to the card base address to reset the internal counter.
This is usually done in the main loop of your program.
The power unit connects
between the wall power outlet and the computer and simply turns off the power
and then turns it back on again.
Utility software is included for DOS, Windows
3.1/95/NT, OS/2 and UNIX.
The advantage of the Watch Dog Timer II over the
Watch Dog I is that
the Watch Dog II has an expansion power control box
that can control an external component.
Data:
click here M17050: $230+GST 9/06
This
Ultra DMA133 IDE controller is designed to provide the best performance and cost
choice for upgrading personal computers.
Use the M2886 described below,
which also has RAID capability.
More about PCI-X (opens new window)
M2734 HP SCSI Controller Ultra 320 - 64 bit PCI-X: $235+GST 9/06
Adaptec Cards - please enquire
Adaptec site rxm
This RAID controller has dual
Ultra DMA133 IDE channels designed to provide data security and performance.
It supports RAID 0, 1 and 10 and is suitable for use with Windows 95/98, NT, 2000
& XP.
Also available in Low Profile configuration.
View PDF
datasheet (or download - Right Click, Save) M2886: $90+GST
9/06
M2812 HDD Controller IDE Raid - Spare Frame for above $115+GST 9/06
| The fastest and easiest PC recovery System.
Prevents unwanted system changes. | You will no longer need
to: |
The Hard
Disc Restore Card is a guardian for your Hard Disc, against virus, “Trojans” or
unauthorized tampering.
The Restore card effectively locks your hard drive
preventing changes to software and settings.
This information is stored in
a “quarantined” area of your hard drive.
Any changes will be undone automatically
on rebooting.
Alterations to your settings are controlled via a multi mode/level
access-protocol.
Operating Systems Windows 95 & 98, NT, 2000 &
XP
Hard Disc supported SCSI and IDE.
Format FAT 16, FAT 32 and NTFS supported.
Hard Disc Usage Less than 5% of total HDD Area
System Requirement 486 or higher
IBM compatible. M17079: $90+GST
9/06
Has 2-digit
7-segment number (hex) display which shows the BIOS POST (Power On Self Test)
Codes.
Just plug into a vacant PCI slot and turn on the computer. Sunix
9501 Sunix
A LED display
shows a numeric error code indicating the area of the fault.
By checking
the error code against the appropriate BIOS listing, the type of fault can be
identified.
The error code messages for AMI BIOS, PHOENIX BIOS and AWARD
BIOS are listed in the manual. M3422: $115+GST 9/06
Has 2-digit 7-segment number (hex) display which shows the BIOS POST (Power On Self Test) Codes. When a fault is detected, the display stops counting, showing an error code. When compared with the appropriate BIOS listing this indicates the area of the fault. Diagnostic error codes are provided for AMI ISA, AMI EISA, AWARD, Pheonix and Quadtel BIOS.
In addition, 4 LEDs show the status of: Vcc,
RST (reset driver), RDY (I/O channel ready) & ALE lines. Suitable for
286, 386, 486 & 586 PCs M3128: $95+GST 9/06
A
Low Profile ECP/EPP/SPP printer card using the PCI BUS. Installation is simple
with its Plug n Play BIOS support.
It is able to replace faulty mother board
printer ports as LPT1/2.
Operating system support includes DOS, Win9x ME
and WinNT/2000.
Cable DB44M to DB25F included. Data:
click here $110+GST 9/06
LPT1 or
2 only. No ECP/EPP. Bi-directional printer card with an 83 bit FIFO using the
PCI BUS.
Installation is simple with its Plug n Play BIOS support.
It
is able to replace faulty mother board printer ports as LPT1/2. Operating system
support includes DOS, Win95 & NT.
M2618 PCI PnP Printer
Card, 1-port: $80+GST 9/06
M2619 PCI PnP Printer Card, 2-port: $120+GST
M2687 Printer Card 1-Port ECP/EPP/SPP PnP PCI Data:
click here $95+GST 10/05
M2688 Printer Card 2-Port ECP/EPP/SPP PnP PCI Data: click here $120+GST
Support standard (5V) or low voltage (3.3V)
for high frequency CPU and bus. Physical fit for 64 bit slot.
•
Bus PCI local bus Ver2.2 compliant
• Type ECP/EPP/SPP/BPP More
about PCI-X (opens new window)
• Speed Up to 2.7MB/sec
•
Voltage 3.3Volts or 5Volts
• Operating system support includes DOS, Win95/98/ME,
NT, 2000, 2003, XP and Linux
• Connector: DB25F
connector M2724: $105+GST 9/06
ISA Bus parallel printer port cards do not normally need drivers.
Available as 1 or 2 port, these bi-directional
parallel ports have a 32 byte FIFO buffer and can be configured to LPT1 (3BC),
LPT2 (378), LPT3 (278), LPT4 (368), LPT5 (268), LPT6 (358) or LPT7 (258) and set
on interrupts 3 through to 15.
All connectors are DB25 female. High IRQ's:
3, 4, 5, 7, 9, 10, 11, 12, 15
Supports addresses 3BC, 378, 278, 368, 268,
358 and 258
Can disable any of the ports
¨ Chipset: SUN1689
¨
Compatible Chips: with ST78c34 and HT6535
¨ IEEE Standard: SPP/BPP (PS-II)
Interface
¨ Max. Speed: Up to 770KB/sec
¨ Compatibility: 486/586/Pentiium/Pentium-II/III
¨ Operating system: Windows 95, 98, NT, 2000, LINUX Data:
click here
M2314 single
parallel port card: for 1: $65+GST for 2+: $55+GST 9/06
M2315 dual parallel port card: for 1: $75+GST
for 2+: $65+GST
Add
the speed of an ECP/EPP parallel port to your computer.
It contains all the
necessary input/output signals to be configured as a
Centronics printer port
SPP, an ECP (compatible with IEEE1284 standard) or an EPP (compatible with EPP
version 1.9 and 1.7) smart printer port.
The card can be configured as LPT1-7
with addresses 3BC, 378, 278, 368, 268, 358, 258 plus it provides 7 DMA settings
for ECP mode.
It supports ten IRQs 3, 4, 5, 7, 9, 10, 11, 12, 14 & 15.
Data transfer rates up to 1MB/sec are possible compared to 180kB/sec with
a Standard Parallel Port. ISA bus.
M2235
Single Port ECP/EPP Printer Card : $60+GST 9/06
This card is high in both quality and versatility.
Each port has 7 selectable I/O addresses (26C,27C, 258, 268,278, 378,3BC)
and 10 selectable IRQs (IRQ3-IRQ15),
plus 2 selectable DMA channels (1 &
3).
You can also the select printer modes for each port between
SPP
(Bi-directional standard printer port)
EPP (compatible with EPP version 1.9
and 1.7) and
ECP (compat with IEEE1284 standard). Two Port LPT1-7 ECP/EPP
M2236: $70+GST 9/06
M2620 2 Serial / 1Parallel, PnP PCI Bus: $140+GST 9/06 M2620 data: click here
M2298 Serial/Parallel
Card 4 Serial / 3Parallel, 16550 Hi IRQ
- ISA bus $140+GST 9/06
These combination cards allow each serial port to be configurable as COM1 to 4
on IRQs 3 to 15.
All serial ports have 16C550 compatible UARTs.
The
LPT ports can be configured as LPT1, LPT2 or LPT3 and can also be set on IRQ 3
to 15.
They are jumper selectable as standard port or bi-directional.
M2794 Serial/Parallel 2S / 1P
EPP/ECP - ISA bus $115+GST 9/06
A serial/parallel card where each serial port is configurable as COM1 to COM8
on IRQs 3 to 15.
The LPT port is ECP/EPP/SPP/PS/2 compatible and can be configured
as LPT1 to LPT 6 and can also be set on IRQ 3 to 15.
Both serial ports are
fitted with 32 Byte FIFO compatible with the 16C650 with clock speeds of 1.8432
- 7.372MHz.
Each serial and parallel port can be disabled separately.
One parallel and one serial port are on the card, the 2nd serial port requires
a 2nd metal bracket.
M2255 Serial/Parallel
Card 2S / 1P 16550 Hi IRQ - ISA bus $105+GST
9/06
Each serial port is configurable as COM1
to COM8 on IRQs 3 to 15.
The LPT port is bi-directional and can be configured
as LPT1 to LPT 6 and can also be set on IRQ 3 to 15.
Both serial ports are
fitted with 16 Byte FIFO compatible with the 16C550. Each serial and parallel
port can be disabled separately.
M2274
Serial/Parallel Card 2S / 2P 16550
Hi IRQ - ISA bus $115+GST 9/06
Serial
ports are configurable as COM 1-4 with each port capable of being set to IRQ 3,
4, 5, 7, 9, 10, 11, 12, 14 or 15.
They also contain addresses 2A0, 2A8, 180
and 188 for SCO UNIX, XENIX on IRQs 3 to 15.
The parallel ports may be jumpered
as LPT1-2, 2-3 or 1-3 on IRQs 5, 7, 9, 11 or 12.
Serial ports have DB9 connectors.
Parallel ports can be disabled
One parallel and one serial port are on the
card, the 2nd serial port requires a 2nd metal bracket.
SPP-100 PCMCIA enhanced parallel port card $POA
hmsq
Data:
click here
