DT5 Software

for DT5 Series: for IBM-PC DOS & Windows 3.1/95. Uses a parallel printer port.
Select sampling interval, start time, input range. Allows uploading data to file, with graphic & tabular display of data. Gives date & time with data. ASCII or LOTUS format. Printer: Epson FX or LQ or compat.
DT5 Software - 32-bit is available for download:
 DATA-i for Windows 95, 98 and Windows NT     Support (Innovonics) : click here 
includes enhanced export functions for using Data-i data in external applications such as spreadsheets.
Installation includes drivers necessary to access the ports under NT.

DT5-C Cable for DT5 loggers (RJ-11 to DB25 plug). : $160+GST

UM-0041: DT5 User Manual:

DT5E Event Logger - No longer available - see ACR SmartReader SR9, SR+ 9

DT5E counts contact closures or NPN transistor ON states and
records the count at the end of every recording interval.
Can reset to zero each time if desired.  Maximium 15 counts/sec. Debounce period 20ms.
Has data storage for 16000 8-bit readings or 8000 16-bit readings except where indicated.
Data is not lost if battery fails.
Has real time clock.
Recording interval may be set from 1 sec to 18 hours.
Data recording can be set to start in the future.

Supplied with a small alkaline 9v transistor radio battery (life one year). Up to 3 years battery life may be with a Lithium battery).
Has parallel port which connects to host computer, for programming and unloading data.
Weatherproof stainless steel enclosure (210x50x25mm).

DT5E/16: Stores 16K 8-bit rdgs, or 8K 16-bit rdgs  $640+GST ($704 incl GST)

DT5 loggers require DT5-CS  Cable and Software for IBM-PC and (see below): DT5-CS:  $150+GST  ($165 incl GST)

Data sheet on DT5: click here

DT5W Water Level Logger

Immersible tubular stainless steel case, 44.5mm dia, for lowering into 50mm boreholes using a stainless steel support cable.
Can be immersed for long periods of time.   Data on DT5W: click here
0 to 3m, resolution: 40mm (8K rdgs) or 10mm (4K rdgs)
0 to 10m, resolution: 40mm (8K rdgs) or 10mm (4K rdgs)
0 to 20m, resolution: 80mm (8K rdgs) or 20mm (4K rdgs)
Accuracy better than 1%. Can be calibrated individually to better than this figure.
Also requires DT5-VC vented cable.   DT5W-3 or DT5W-10 or DT5W-20: $1481.82+GST  ($1630 incl GST)

Vented Cable (has air vent tube inside stainless steel support cable so that sensor can compensate for ambient air pressure)
DT5-VC:   $7.00+GST ($7.70/m incl GST)