| LCD Touchscreens - Desktop | ||
| Panel
Mount LCD Monitors with & without Touchscreen | PAL
Video Monitors Panel mountable | |
| PC
Video Extension 100s of meters Remote Console 250m |
Intrinsically
Safe LCD Displays for
mining, etc, IS Text & Graphic Operator Screens
3½- and 4½-digit loop-powered indicators - 32-character
alphanumeric LCD - touch-screen computers and monitor
This Page: 8" 10" LCD Monitors 12" 14" LCD Monitors x
15"
LCD and up:
Mitsubishi Panasonic
Sunlight Viewable
Scratch & Shock Resistant 17" & 19" LCD Monitors
Monitor
Mounting: Monitors which comply with the VESA mounting standard (4 screw holes
in a square, 75mm or 100mm apart, M4 screws) can be attached to a tilt or
swivel arm, etc.
The arms can be desk mounted, wall mounted or ceiling
mounted. See Mounting Arms page.
Cabling
& DVI:
Power cable, and Image cable are required. Cable for
the image can be either VGA (15-pin) or DVI (Digital Video Interface,
24-pin).
DVI gives the highest image quality, but the computer must support
the DVI interface. DVI
Information
DVI-D
(digital only) DVI-A (analog only) DVI-I
(integrated, digital & analog)
The connector also includes provision for
a second data link for high resolution displays, though many devices do not implement
this. In those that do, the connector is sometimes referred to as DVI-DL (dual
link). Connector
width: 37mm.
The
DVI-I (24 + 4 pin connector) can transfer digital and analog signals which use
C1 to C4 at the right.
This allows a VGA monitor with 15-pin D connector to
be connected to DVI-I or DVI-A output with a simple plug adapter.
"Image phase adjustment" allows fine tuning of the image appearance.
A 15.1" colour LCD monitor is comparable in image size to a 17"
CRT monitor.
The
maximum length of DVI cables is not included in the specification since it is
dependent on bandwidth requirements (the resolution of the image being transmitted).
In general, cable lengths up to 4.5 m (15 ft) will work for displays at resolutions
of 1920 x 1200.
Cable lengths up to 15 m (50 ft) can be used with displays
at resolutions up to 1280 x 1024.
For longer distances, to eliminate the video
degradation, the use of a DVI booster is recommended. DVI boosters may or may
not use an external power supply.
One
nit
(unit of luminance) is equal to one candela per square meter (1 cd/m²), used
to quote the brightness of computer displays.
Candela:
A unit of measurement of the intensity of light. 1 candela = 1 lumen/steradian.
Part of the SI system of measurement, one candela (cd) is the monochromatic radiation
of 540THz (near green) with a radiant intensity of 1/683 watt per steradian in
the same direction.
Another way of putting it is that an ordinary wax candle
generates approximately one candela in any particular direction.
A light source
that uniformly radiates one candela in all directions radiates a total of 4pi
lumens.
A 100 W incandescent lightbulb emits about 120 cd.
Steradian
(sr) A unit of measure equal to the solid angle subtended at the center of
a sphere by an area on the surface of the sphere that is equal to the radius squared:
The total solid angle of a sphere is 4pi steradians.
1 Lux = 1 lumen/square
meter, the illumination of a surface.
These
have no VESA mounting holes. uzm
Data:
click here
Without Touchscreens:
J-POS 104 LCD with 8
inch Display. $POA+GST
J-POS 105 LCD with 10 Inch Display $POA+GST
J-POS
106 LCD with 12 Inch Display $POA+GST
With Touchscreens: see Touchscreen page
Ideal for POS applications. The Monitors are
available in 14.1" active TFT LCD flat panel display.
Available in Beige
or Black Colour. uzm
LCD
Display 14.1” TFT Active Matrix Panel
Display Size : 285.7 x 214.3 mm
Pixel Pitch : 0.279 x 0.279 mm
Max. Resolution : SVGA 1024x 768
Front Control : Power Switch, Menu, Select (Up, Down), Adjust (+,-) OSD Auto-Adjustment,
Contrast, Brightness, Clock, Phase, H-Position,
V-position, Color
Dimensions : 335 x 350 x 162 mm Weight
(net) : 7Kg
This monitor does not have VESA mounting holes. The base
can be removed.
Posbox LC-214 LCD Monitor, beige
or black: $675+GST
Rebadged Viewsonic VE510B $550+
M8728
Two lines of 20 Characters - Serial Connection This customer
display is designed for POS application and is driven from the serial port.
It has a vacuum fluorescent display with two lines of 20 characters.
Data: click here
The characters
are 11.25mm high. Operates correctly with Digi-Till (many don't).
M8728
POS Customer Display - Serial Connection - characters 11.25mm high:
$330+GST
This
customer display is designed for POS application and is driven from the serial
port.
It has a vacuum fluorescent display with two lines of 20 characters.
The characters are 9mm high. Operates correctly with Digi-Till (many
don't).
M8907 POS Customer Display - Serial
Connection - characters 9mm high: $260+GST
Please enquire lqlzqhmd
3 years limited onsite warranty. (3 years also applies to the back light, which most others don't) lls zkr zrh
Data on Mitsubishi Products: click here
DV174BP
17" Multimedia TFT LCD Display Monitor with Protective Screen Scratch
and shock resistant screen which covers the LCD panel,
for places where the
LCD panel may be susceptible to damage.
BNC and S-Video input/output
connectors make this monitor truly special.
The combination of video and
computer connections makes this monitor ideal for security or video monitoring
applications.
It also has built-in speaker, headphone socket, low
power consumption, light weight, and removable stand for rack mounting.
High Resolution, 1280 x 1024 Pixel Thin-Film Transistor LCD Panel
Scratch, shock resistant screen cover shields the LCD panel
Both video and
data inputs
High Brightness and Contrast - 300 cd/m² brightness and
500:1 contrast ratio
500 TVL Video resolution
Fast Response time 8 ms
(Tr + Tf).
Viewing Angle (Left/Right, Up/Down) ±75°, +60°/ -70° (typical)
Dot Pitch 0.264 mm (Horizontal and Vertical)
Plug and
Play compatible with Microsoft® Windows® 98, 2000, Me and XPApple®
Macintosh® compatible
Auto Adjustment Function for easy installation:
automatically optimises the displayed image by tuning it to the characteristics
of the graphics signal
Space Saving - only 170 mm deep including the stand
Light Weight - only 5.2 kg
Removable Stand for rack mounting
Backed
by a limited three year parts and labour, warranty through our nationwide service
centres
Built-in Speaker included
Data
on DV174BP (Mitsubishi site, opens in new tab or window)
| User Interface Controls Input Signal Warranty: 3 years | Physical Characteristics
Maximum Power Consumption: 40 Watts, < 5 Watts in power saving mode Power Management: VESA DPMS, Energy Star Operating Voltage: Automatic switched mode power supply 100 – 240 Vac, 50 - 60 Hz Dimensions (W x H x D): 384mm x 398mm x 170 mm Weight: 5.2 kg Base Tilt: -5º / +40º Base Swivel: 0º Operating Temperature: 0°C ~ 40°C Operating Air Humidity: 20% - 90%, non-condensing Regulatory Certification Safety: AS/NZS 60950 EMI/EMC: AS/NZS CISPR 22 (C-Tick) Other: ISO 13406-2 Screen Shield Material: Anti-Reflective Tempered glass Dimensions: 352 x 287 mm Thickness: 3 mm Scratch Resistance: Resists scratching with an 8H pencil using firm pressure Impact Resistance: A steel ball weight approx. 227g dropped in free fall from a height of 145 cm onto the centre of the screen will result in no breakage of shield or damage to LCD panel. |
DV174BP 17" Multimedia TFT LCD Display Monitor with Protective Screen: $756+GST 3/09
DX-D191P
19" TFT-LCD Security - AV Display with Protective Screen Scratch
and shock resistant screen which covers the LCD panel,
for places where the
LCD panel may be susceptible to damage.
However it's the addition of BNC and S-Video input/output connectors that make this monitor truly special. The combination of video and computer connections makes this monitor the ultimate choice when considering security or video monitoring applications.
The combination
of video and computer connections makes this monitor ideal for security or video
monitoring applications.
It also has features such as Adaptive 3D Comb Filter
for sharper images, Picture in Picture functionality, Built in speaker, and a
DC 12V power output port to supply power to a single device (e.g CCTV camera)
Data
on DX-D191P (Mitsubishi site, opens in new tab or window)
| Display Characteristics Input Signal Warranty: 3 years | Physical
Characteristics Dimensions (W x H x D): 420.6 x 405.3 x 170 mm |
DX-D191P 19" TFT-LCD Security - AV Display with Protective Screen: $942+GST 3/09
Data
on Mitsubishi LCD Monitors: click here
Mitsubishi LCD monitor data: click here VGA (RGB) inputs from computer only
Panasonic LCD Data Panasonic "Dead Pixel Policy": click here zkr sdb ltk lls
Video Cards - VGA & LCD
PCA-6654 SVGA/LCD Card, PCI bus
PCI bus. Supports a wide range of LCD, EL & gas plasma
flat panel displays, & CRT monitors.
2MB DRAM, (opt. 256KBx16 DRAM socket
for frame buffer).
Simultaneous CRT/LCD display. HPCN26 44-pin for flat panel
display & DB-15 for CRT
Diagram
of PCA-6654
PCA-6654LB supports only the 44-pin LCD connector,
it can not work with the products which support panel link connector.
(The
PCA-6654B supported both panel link connector and 44-pin LCD connector.)
PCA-6654LB-VGA PCI Bus Panel/CRT VGACard Rev.B (for IWS) $284+GST 7/06
