LCD Monitor Mounting Arms

Jump up one level to LCD Monitors

Jump to Telehook - wall & ceiling mounts for large screens


Esis Pty Ltd - Australia - Ph 02 9481 7420  Fax 02 9481 7267  www.esis.com.au 
E-mail: click here       Go to Esis main page
Prices (Australian dollars) do not include GST and may change without notice.

Jump to other page:    Ergotron Range
includes new Combo Notebook and Screen stand.

Jump down to
  Freestanding models:  
        Freestanding Double - Visidec       Freestanding - from single up to six monitors - Spacedec

  Swing Arms               Articulated Arms - Desk or Wall mount      Wall Mounts  

  Clamp on to Pole       Arrays of LCD Monitors    POS Range - Pole Mount     Ceiling Mount

  Mounting Details      Vesa Mounting Explained     Keyboard Support Tray Arm    Notebook Holders  


Large Flat Screen mounting - Telehook

Wall and Ceiling mounts for large flat screens & projectors: jump to Telehook page: click here

   and more
    and more

   For more about these mounts for large screens, jump to Telehook page: click here


The SPACEDEC family
consists of the Acrobat, Display and Freestanding ranges

offers a premium, fully ergonomic and comprehensive range of LCD mounts for home, office and commercial applications up to 24” or 9kg/20lbs.
SPACEDEC products are brilliantly engineered and made of the highest quality materials.
Smart features developed by ATDEC and used in the SPACEDEC family allow users to adjust monitor height, viewing distance and tilt from a seated position with minimal effort.

Acrobat Range:  
    mount on a horizontal surface using a pole, or onto a wall.
    Swing Arms or Articulated Arms  See below for details on these items.


Freestanding Range:  
   These stand on a desktop or bench without fixing down.
    For one, two, four or six monitors.  See below for details on Freestanding items.


Display Range:  
     Screen mounts onto pole (without any arm),
           which can be fixed to a desk, wall or ceiling.
               See below for details on Display Range


More details on the SPACEDEC items

Acrobat Range Details:  
    mount on a horizontal surface using a pole, or onto a wall
    Swing Arms or Articulated Arms  

Acrobat Swing Arm

Suits LCD Flat Panel Displays from 12” (30cm) to 24” (61cm)
Suits 75x75mm (3” x 3”) and 100x100mm (4” x 4”) VESA mounting hole patterns
Supports a maximum weight of 9kg (19.8lbs)
Portrait/landscape rotation with gas strut height adjustment from a seated position
Arm length 350mm (13.3”)
Features +/-40° angular adjustment
Includes cable management
Includes both Bolt Through and Desk Clamp mounting options
All hardware included     Full data (Atdec site)
SD-SA-DK-BK   Black Acrobat Swing Arm:  $227+GST    L p
SD-SA-DK-S      Silver Acrobat Swing Arm:  $227+GST
SD-SA-DK-P  Polished Acrobat Swing Arm:  $227+GST

Acrobat Swing Arm Double

Suits LCD Flat Panel Displays from 12” (30cm) to 24” (61cm)
Suits 75x75mm (3” x 3”) and 100x100mm (4” x 4”) VESA mounting hole patterns
Supports a maximum weight of 9kg (19.8lbs) per mount
Portrait/landscape rotation with gas strut height adjustment from a seated position
Arm Length 350mm (13 ?”)
Features +/-40° angular adjustment
Includes cable management
Bolt Through and Desk Clamp mounting options are available
All hardware included     Full data (Atdec site)
SD-SA-DB-BT-BK           (bolt through) Acrobat Swing Arm Double, black: $385    L p
SD-SA-DB-BT-S              (bolt through) Acrobat Swing Arm Double, silver: $385
SD-SA-DB-BT-P               (bolt through) Acrobat Swing Arm Double, polished: $385

Desk Clamp mounting:
SD-SA-DB-DC-BK  Black (desk clamp) Acrobat Swing Arm Double, black: $385
SD-SA-DB-DC-S  Silver (desk clamp) Acrobat Swing Arm Double, silver: $385
SD-SA-DB-DC-P  Polished (desk clamp) Acrobat Swing Arm Double, polished: $385

Acrobat Swing Arm Double - Combo

Combo: Desk Clamp  &  Bolt Through   mounting options
Combo unit will supercede above bolt through & desk clamp approx end Feb 08.

SD-SA-DK-DB-BK  Combo Desk Clamp & Bolt Through, black:  $385
SD-SA-DK-DB-S  Combo Desk Clamp & Bolt Through, silver:  $385
SD-SA-DK-DB-P  Combo Desk Clamp & Bolt Through, polished:  $385

Acrobat Swing Arm Accessory Holder

SD-AH-P   Acrobat Swing Arm Accessory Holder, Polished 881493004467  45x27x11 1.9kg  $153
SD-AH-BK Acrobat Swing Arm Accessory Holder, Black 881493002784  45x27x11 1.9kg    $153
SD-AH-S   Acrobat Swing Arm Accessory Holder, Silver 881493004474  45x27x11 1.9kg    $153

Acrobat Articulated Arm - Combo

Combo: Desk Clamp  &  Bolt Through   mounting options
Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 9kg (19.8lbs)
Arm Length 610mm (23 ½”)
Features +/-40° angular adjustment
Portrait/landscape rotation with gas strut height adjustment from a seated position
Includes both Bolt Through and Desk clamp mounting options
Includes cable management
All hardware included    Full data (Atdec site)
SD-AT-DK-BK  Black Acrobat Articulated Arm:  $267+GST
SD-AT-DK-S    Silver Acrobat Articulated Arm:  $267+GST
SD-AT-DK-P   Polished Acrobat Articulated Arm:  $267+GST

Wall Mounts

Acrobat Swing Arm Wall

Wall mounting Swing Arm
Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 9kg (19.8lbs)
Portrait/landscape rotation with gas strut height adjustment from a seated position
Arm length 350mm (13”)
Features +/-40° angular adjustment
Includes cable management
All hardware included    Full data (Atdec site)
SD-SA-DW-BK  Black Acrobat Swing Arm Wall:  $227+GST     L p
SD-SA-DW-S     Silver Acrobat Swing Arm Wall:  $227+GST   

Acrobat Swing Arm Slat Wall

See description above.
The SPACEDEC Acrobat Swing Arm in Slat Wall configuration requires additional information.
Please specify brand and model of your workstation.
   Full data (Atdec site)

SD-SA-SW-BK  Black Acrobat Swing Arm Slat Wall:  $227+GST     L p
SD-SA-SW-S     Silver Acrobat Swing Arm Slet Wall:  $227+GST 
SD-SA-SW-P   Polished Acrobat Swing Arm Slat Wall:

Acrobat Swing Arm Accessory Holder

   See above, in Swing Arm section.

Acrobat Articulated Wall Arm

Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 9kg (19.8lbs)
Arm length 610mm (24”)
Features +/-40° angular adjustment
Portrait/landscape rotation with gas strut height adjustment from a seated position
Includes cable management
All hardware included    Full data (Atdec site)
SD-AT-DW-BK  Black Acrobat Articulated Wall Arm:  $285+GST
SD-AT-DW-S     Silver Acrobat Articulated Wall Arm:  $285+GST
SD-AT-DW-P   Polished Acrobat Articulated Wall Arm:

For Notebook Computers - Desk & Wall Mounts

Acrobat Swing Arm Notebook

Combo:  Desk Clamp  &  Bolt Through   mounting options
Suits notebook computers and docking stations up to 17" (43cm) widescreen
Supports a maximum weight of 4.5kgs (9.9lbs)
Portrait/landscape rotation with gas strut height adjustment from a seated position
Gas strut height adjustement from seated position
Designed to be used in conjunction with a separate keyboard and mouse
Notebook support area measures 320mm x 330mm (12½" x 13")
Arm length maximum reach 502mm (19 5/8”)
Designed to minimise heat build up
Includes cable management
Designed to help minimise heat build up
Includes Safety Strap
Includes both Bolt Through and Desk Clamp mounting options
All hardware included    Full data (Atdec site)
SD-NTB-DK-BK  Acrobat Swing Arm Notebook, Black:  $247+GST    L p
SD-NTB-DK-S   Acrobat Swing Arm Notebook, Silver:  $247+GST
SD-NTB-DK-P  Acrobat Swing Arm Notebook, Polished:  $247+GST

Acrobat Swing Arm Notebook Direct Wall Mounting

SD-NTB-DW-B   Black, Acrobat Swing Arm Notebook Direct Wall:
SD-NTB-DW-S   Silver, Acrobat Swing Arm Notebook Direct Wall:
SD-NTB-DW-P  Polished, Acrobat Swing Arm Notebook Direct Wall:


Freestanding Range Details:  
   These stand on a desktop or bench without fixing down.
    For one, two, four or six monitors.

Freestanding Single

Discontinued – replaced by Visidec Freestanding Single which is available from July 2008

Supports 1 LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs) per display
Sturdy steel base with felt pads to protect work surface
Vertical height adjustable
Maximum height to centre of display - 250mm (29¾")
Features +/-40° angular adjustment
Portrait/landscape rotation
Includes cable management
All hardware included    Full data (Atdec site, opens new window)
SD-FS-SI  Black, Freestanding Single:  $227+GST   

Freestanding Double Horizontal

Supports 2 LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs) per display
Stylish aluminium base with felt pads to protect work surface
Horizontal and vertical adjustments
Maximum height to centre of display 427mm (16¾")
Features +/-40° angular adjustment
Portrait/landscape rotation
Includes cable management
All hardware included    Full Data (Atdec site, opens new window)
SD-FS-DH Black, Freestanding Double Horizontal:  $378+GST

    See also Visidec Freestanding Double Horizontal V-FS-DB below

Freestanding Double Vertical

Supports 2 LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75mm x 75mm (3" x 3") and 100mm x 100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs) per display
Sturdy steel base with felt pads to protect work surface
Vertical height adjustable
Maximum height to centre of top display 755mm (29¾")
Features +/-40° angular adjustment
Portrait/landscape rotation
Includes cable management
All hardware included     Full data (Atdec site, opens new window)
SD-FS-DV  Black,  Freestanding Double Vertical:  $360+GST

    See also Visidec Freestanding Double Vertical V-FS-DV below

Freestanding Hex - Discontinued

To be replaced by a Visidec product.

Supports 6 LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75mm x 75mm (3" x 3") and 100mm x 100mm (4" x 4") VESA mounting hole patterns
Stylish aluminium base with felt pads to protect work surface
Horizontal and vertical adjustment
Supports a maximum weight of 11.5kg (25.3lbs) per display
Maximum height to centre of top display 755mm (29¾")
Features +/-40° angular adjustment
Portrait/landscape rotation
Includes cable management
Curved monitor positions
All hardware included   Full data (Atdec site, opens new window or tab)
SD-FS-H  Black, Freestanding Hex:  $1,191+GST

Freestanding Quad - Replaced by Visidec Freestanding Quad V-FS-Q

Supports 4 LCD Flat Panel Displays from 12” (30cm) to 24” (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs) per display
Stylish aluminium base with felt pads to protect work surface
Horizontal and vertical adjustments
Maximum height to centre of top display 747mm (29½")
Features +/-40° angular adjustment
Portrait/landscape rotation
Includes cable management
All hardware included     Full data (Atdec site, opens new window)
SD-FS-Q  Black, Freestanding Quad:


Display Range Display:  
     Screen mounts onto pole (without any arm),
           which can be fixed to a desk, wall or ceiling.

Display Direct Wall

Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs)
Mounts rear of display 95mm (3¾") from the wall
Features +/-40° angular adjustment
Portrait/landscape rotation
All hardware included    Full data   (Atdec site, opens new window or tab)
SD-DW-DM-BK (Direct mount) Black:  $101+GST          L p
SD-DW-QR-BK (Quick Release) Black:  $128+GST

Screen mounting options:
     Direct-to-screen or Quick release (Atdec site, opens in new window or tab)

Display Ceiling Mount

Must be used in conjunction with Ceiling Hangers
Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs) per display
Includes a standard riser pole with an adjustment range of 250mm (10") in 25mm (1") increments.
Features +/-40° angular adjustment
Portrait/landscape rotation
Mounting Options: Single only
Includes internal & integrated cable management
All hardware included   Full data (Atdec site, opens new window or tab)
SD-CMS-NP  Black, Display Ceiling Mount:  $156+GST

Display mounting options

Hanger Lengths (ordered separately) Ceiling Hangers
    SD-CE-400: $82,       SD-CE-750: $91,         SD-CE-1100: $101,
    SD-CE-1450: $110,  SD-CE-1800: $119+GST

Display POS Multi

Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Supports a maximum weight of 11.5kg (25.3lbs) per display
Display can be configured fixed or to rotate 90°, 180°, 270° or 355°
Maximum height to centre of display 330mm (13")
Features +/-40° angular adjustment
Features portrait/landscape rotation
All hardware included    Full data (Atdec site, opens new window or tab) 
Security features include:
    Internal cable management
    Mount from either top or bottom of work surface
    Concealed mounting hardware
    Display security cable fixing point
Available in Back to Back configuration (Kit sold separately)
SD-POS-M  Black, Display POS Multi:  $144+GST

Display mounting options
SD-POS-M-BB   Back-to-Back conversion Kit:  $85+GST

 

Display Donut 42mm and 50mm

Available in 42mm (1.65") and 50mm (2") internal diameters
Suits LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Supports a maximum weight of 11.5kg (25.3lbs) per display
Suits 75mm x 75mm (3" x 3") and 100mm x 100mm (4" x 4") VESA mounting hole patterns
Poles for 42mm (1.65") diameter donuts only
Features +/-40° angular adjustment
Portrait/landscape rotation
All hardware included   Full data (Atdec site, opens new window or tab)
SD-DO-42-BK Black, Display Donut 42mm:  $99+GST    L n
SD-DO-50-BK Black, Display Donut 50mm:  $99+GST

Display Donut Pole Single
   includes Pole & One Donut
   plus Combo Desk Clamp & Bolt Through Mounting Options

Pole is 420mm high

SD-DP-SI-BK Black 881493003910 46 x 23 x 14 2.5 6# / 73 x 48 x 31 / 16kg   $139
SD-DP-SI-AN Silver 881493003880 46 x 23 x 14 2.5 6# / 73 x 48 x 31 / 16kg   $139

Display Donut Pole Double
   includes Pole & Two Donuts
   plus Combo Desk Clamp & Bolt Through Mounting Options

Pole is 750mm high

SD-DP-DB-BK Black 881493003927 80 x 26 x 59 3.7 4# / 80 x 26 x 59 / 16kg   $212
SD-DP-DB-AN Silver 881493003897 80 x 26 x 59 3.7 4# / 80 x 26 x 59 / 16kg   $212

Display Donut Pole Triple
   includes Pole & Three Donuts
   plus Combo Desk Clamp & Bolt Through Mounting Options

Poll is 1150mm high

SD-DP-TR-BK Black 881493003934 118 x 22.5 x 14 5.25 2# / 120 x 26 x 30 / 12kg   $280
SD-DP-TR-AN Silver 881493003903 118 x 22.5 x 14 5.25 2# / 120 x 26 x 30 / 12kg   $280

 

Display Donut Pole

Poles available in 42mm (1.65") only  
  Bolt through or desk clamp
Bolt Through:
     350mm (13¾")
     760mm (30")
   1160mm (46")

Desk Clamp
     360mm (14")
     770mm (30½")

All hardware included

SD-PM42-BTS-BK  42mm POLE ASSEMBLY Bolt Through 350mm:  $64+GST    L h
SD-PM42-DCS-BK  42mm POLE ASSEMBLY Desk Clamp 360mm:  $80

SD-PM42-BTD-BK  42mm POLE ASSEMBLY Bolt Through 760mm:  $83
SD-PM42-DCD-BK  42mm POLE ASSEMBLY Desk Clamp 770mm:  $100

SD-PM42-BTT-BK   42mm POLE ASSEMBLY Bolt Through 1160mm:  $123


Visidec Family

The VISIDEC family, consisting of Focus, Traveller and Freestanding Ranges, are contemporary designed mounts for LCD displays for home and office applications up to 22” or 6kg/13lbs.
VISIDEC offers great value in terms of price and functionality, award-winning design, and ease of installation.
The VISIDEC Focus range incorporates Atdec’s FlexiStar™ mechanism – a unique universal LCD screen attachment head which allows users to adjust their VISIDEC Focus mount to suit 75 x 75mm (3” x 3”) and 100 x 100mm (4” x 4”) mounting hole patterns. The FlexiStar™ is a makes choosing a right mount for your monitor easier.

 

 

Visidec Focus - Articulated Arm

Pole mounting
Supports LCD Flat Panel Display
     from 30cm to 55.8cm
Maximum weight of 6kgs
Suits 75x75mm and 100x100mm VESA
               mounting hole patterns
Standard arm length 413mm
Maximum height to centre of display:
               439mm
+/-70° tilt and adjustable pan of 180°
Portrait/landscape rotation and 360° arm rotation
Includes Bolt Through and Desk Clamp mounting options
Internal cable management
All hardware included  Data & larger pic    Full info (Atdec site)
V-AT-DM  Visidec Focus
                                   - Articulated Arm, Polished:
$154+GST

Visidec Focus - Double Articulated Arm

One pole with 2 articulated arms for 2 screens
Supports two LCD Flat Panel Displays from 30cm to 55.8cm
Maximum weight of 6kgs per display
Suits 75x75mm and 100x100mm VESA mounting hole patterns
Holds two displays at the same height
Can configure displays side by side or back to back
Standard arm length 413mm
Maximum height to centre of display 439mm
+/-70° tilt and adjustable pan of 180°
Portrait/landscape rotation
Includes Bolt Through and Desk Clamp mounting options
Internal cable management
All hardware included    Full info & pics (Atdec site)
V-AT-DB  Polished: $298+GST

 

Visidec Focus Micro - Pole mount, no arm

Pole mounting with no arm.
Supports LCD Flat Panel Displays 12" to 22" (30 to 55.8cm)
Maximum weight of 6kgs (13lbs)
Suits 75x75mm (3" x 3") and 100x100mm (4" x 4") VESA mounting hole patterns
Distance from centre of pole to rear of display 115mm (4 ½")
Maximum height to centre of display 439mm (17 ¼")
+/-70° tilt and adjustable pan of 140°
Portrait/landscape rotation
Offers fixed and/or 360° rotation around pole
Includes Bolt Through and Desk Clamp mounting options
Advanced cable management
All hardware included    Full data & pics (Atdec site)      L p
V-AT-MI  Visidec Focus Micro:   $138+GST

Wall Mounts

Visidec Focus - Wall Mount Articulated Arm

Wall mounting
Supports LCD Flat Panel Displays from 30cm to 55.8cm
Maximum weight of 6kgs   Full info & pics (Atdec site)
V-AT-WM  Wall Mount, Polished:
             $154+GST

 

Visidec Focus - Direct Wall Mount

suits LCD monitors up to 19", 6kg
Vesa mounting 75 x 75mm
                 and 100 x 100mm
Tilt ±35°     Pan ±30°
Portrait & Landscape adjustment
Black and polished silver (see picture)
  Data & larger picture  
 V-PS-DW  Visidec Wall Mount:
$66+GST


Visidec Freestanding Single

Please enquire. Available from August 2008

 

 

Visidec Freestanding Double Horizontal

One pole with horizontal rod for 2 screens.
Supports two LCD Flat Panel Displays from 12"-24", 30-61cm
Supports a max. weight of 11.5kg per display
Suits 75x75mm and 100x100mm VESA mounting hole patterns
Horizontal and vertical adjustments  
Distance from centre of pole to rear of display 123mm
Max. height to centre of display 449mm
Features +/-40° angular adjustment
Portrait/landscape rotation
Small Footprint of 380mm (15") wide x 300mm (12") deep
Built in cable management
All hardware included     Full info & pics (Atdec site)      L p

V-FS-DB  Black Base with Matt Silver Poles: $322+GST

    See also Freestanding Double Horizontal SD-FS-DH above

Freestanding Double Vertical

V-FS-DV Polished 881493003811    $270
Supports LCD Flat Panel Displays from 12"-24", 30-61cm
Maximum weight 11.5kg per display
VESA mounting holes 75x75mm and 100x100mm
Vertical adjustments
Distance from centre of pole to rear of display 102mm
Maximum height to centre of top display 737mm
Features +/-40° angular adjustment
Portrait/landscape rotation
Small Footprint of 422mm wide x 305mm deep
     Data & larger picture

V-FS-DV Polished Freestanding Double Vertical: $270+GST

   See also Freestanding Double Vertical SD-FS-DV above

  

Freestanding Quad

V-FS-Q Polished 881493004313
Supports LCD Flat Panel Displays from 12"-24", 30-61cm
Supports a maximum weight of 11.5kg (25.3lbs) per display
VESA mounting holes 75x75mm and 100x100mm
Horizontal and vertical adjustments
Distance from centre of pole to rear of display 102mm (4")
Maximum height to centre of top display 737mm (29")
Features +/-40° angular adjustment
Portrait/landscape rotation
Small Footprint of 422mm wide x 305mm deep
V-FS-Q Polished Freestanding Quad:  $494+GST

 


Notebook Holders - Notebook Mounting

Visidec Traveller 17T

Suits Notebook Computers up to 17” (43cm) widescreen
Supports a maximum weight of 4kgs
Offers 4 height settings
Designed to be used in conjunction with a separate keyboard and mouse
Features a notebook support area measuring 260mm x 275mm
Compact design folds down to 10mm   

V-CG-NB-14T  Visidec Traveller 14T: $52+GST       T s 
V-CG-NB-17T  Visidec Traveller 17T:
$71+GST       T s 
 

Spacedec Acrobat Swing Arm for Notebook

Suits notebook computers and docking stations up to 17" (43cm) widescreen
Supports a maximum weight of 4.5kgs (9.9lbs)
Portrait/landscape rotation with gas strut height adjustment from a seated position
Has a ball joint under the tray for any adjustment
Gas strut height adjustment from seated position
Designed to be used in conjunction with a separate keyboard and mouse
Notebook support area measures 320mm x 330mm (12½" x 13")
Arm length maximum reach 502mm (19 5/8”)
Designed to minimise heat build up
Includes cable management
Designed to help minimise heat build up
Includes Safety Strap
Includes both Bolt Through and Desk clamp mounting options
All hardware included    More info (Atdec site)

SD-NTB-DK-B  Black, Acrobat Swing Arm for Notebook: $POA
SD-NTB-DK-S  Silver, Acrobat Swing Arm for Notebook: $POA
SD-NTB-DK-P  Polished, Acrobat Swing Arm for Notebook: $POA


Ceiling Mounts

Ceiling mounts offer an ideal solution for all retail applications, entertainment and sporting venues, clubs, airports and other mass transport facilities, digital signage and other commercial applications where mounting flexibility and prominence/visibility are critical and space is limited.
Atdec’s Ceiling Mounts have carrying capacity of up to 120kg (164lbs) are ideal for any type of flat screens up to 160cm (63”), including back to back options.

Ceiling Mount

The upper fixed pole attaches to the ceiling.
It has 2 screws at the lower end. These tighten onto a lower pole which telescopes inside the upper pole. The lower pole extends from 55mm up to 255mm from the low end of the upper pole (measured to the centre of the LCD mount).
The mounting plate on the ceiling is 5mm thick.

 More info: click here   
Other lengths can be supplied.

 See also the Telehook Ceiling Mounts:
     click here
(jumps to Telehook page)

Ceiling Hangers available in:
Figures in brackets are the ranges measured from the ceiling to the centre of the LCD monitor mount
400 – 650mm (460 - 660mm)
750 – 1000mm (810 - 1010mm)
1100 – 1350mm (1160 - 1360mm)
1450 – 1700mm (1510 - 1710mm)
1800 – 2050mm (1860 - 2060mm)

400-650mm Single:       BKorST DS CMS 400 DM $226+GST
400-650mm B to Back: BKorST DS CMBB 400 DM $296+
400-650mm Triple:      BKorST DS CMT 400 DM $385+GST

750-1000mm Single:   BKorST DS CMS 750 DM $234+GST
750-1000mm B to Back: BKorST DS CMBB 750 DM $304+
750-1000mm Triple:    BKorST DS CMT 750 DM $393+GST

 

 

1100-1350mm Single: BKorST DS CMS 1100 DM $244+GST
1100-1350mm B to Back: BKorST DS CMBB 1100 DM $314+
1100-1350mm Triple:  BKorST DS CMT 1100 DM $403+GST

1450-1700mm Single: BKorST DS CMS 1450 DM $251+GST
1450-1700mm B to Back: BKorST DS CMBB 1450 DM $321+
1450-1700mm Triple:  BKorST DS CMT 1450 DM $410+GST

1800-2050mm Single: BKorST DS CMS 1800 DM $262+GST
1800-2050mm B to Back: BKorST DS CMBB 1800 DM $332+
1800-2050mm Triple:  BKorST DS CMT 1800 DM $421+GST


 

LCD Monitor Mounting Arms - with Ball Joints

Swing Arms

Flat screen monitor arms that allow the computer user to take full advantage of the technological benefits that flat panel monitors provide.

Its innovative and flexible design allows the monitor height, viewing distance and tilt to be easily adjusted with a light touch from the seated position, whilst incorporating industry standard cable management. This means the monitor can be set to the correct focal length for individual users and can be tilted to avoid glare.

The arms comply with Occupational Health and Safety requirements, meaning that the arm is well suited for use by at least 95% of the adult population in a wide range of work situations.
Frees space on the work surface, allowing desk depth to be reduced from 900mm to 600mm without any reduction in functionality.

Up to three monitor arms can be mounted onto a single post, all with 360° rotation capability.
The adapter plate complies with the VESA industry standard, meaning compatibility with most flat screen monitors.
Different mounting options integrate the monitor into a variety of office environments and include desk and wall/screen mounting systems.

The ball joint behind the monitor, at the end of the arm, has a rotational adjustment range of ±40°.

A Keyboard Storage Tray can be fitted below the monitor(s).
This has been designed to hold a standard keyboard, allowing the user to store their keyboard when not in use, to free desk space. Available for the Swingarms (not Articulated Arm).   More information near end of this page.

Australian Designed and Manufactured and the only arm on the market that is approved by AFRDI and complies with Occupation Health & Safety Standards.
Endorsed Supplier Status under the Commonwealth Government's Endorsed Supplier Arrangement (ESA).

  More pictures & info: click here     Warranty period: 2 years

Swing Arms

   More pictures & info: click here

Swing Arms

 

   

For mounting details
scroll down to the end of this page.

Mounting the LCD onto the Arm

Direct Mount:
Monitor is bolted directly onto the mounting plate at the end of the arm.   Large picture of Direct Mount

Quick Release:
Monitor is removable, keylock is provided - discontinued in all models except for Display Direct Wall

Conversion Kit    from Direct Mount to Quick Release - discontinued

For more mounting details, scroll down to the end of this page.

 


Swing Arms for LCD Monitors - Swing Arm Acrobat Range

Swing Arms are 340mm long (see pictures above right)
Extra Long Swing Arms are 450mm long - discontinued.

The pole can support up to 3 LCD monitors (3kg to 9kg), and can be adjusted as follows:
- 360º rotation of the arm around the mounting post/
- 180º for the wall mount version
- 90º angle sweep of the arm vertically (75º up and 15º down)
- 180º angle sweep horizontally of the monitor relative to the arm
- an additional ±40º in all planes of the monitor relative to the arm
- 360º rotation of the monitor about the arm allowing the monitor to be rotated
     from landscape to portrait format with suitable software applications (desktop publishing/financial/trading applications etc)
- All movements can be made from a seated position.

(Packed weight:  Bolt through 2.5kg,  Desk Clamp: 3kg)

Post Heights
Single:   260mm (3 segments, 11.2”)
Double: 362mm (4 segments, 14.2”) monitors side by side
Triple:   602mm (7 segments, 24”)
  with the triple, 2 monitors can be set side by side,
  and the third monitor above.
Extra segments, 80mm each can be added to make the pole higher, up to 7 segments total, including those with the arms attached.

 Swing Arm Data click here (link to Atdec site, needs IE browser)     Swing Arm Technical Spec  (.pdf file 350KB, opens new window)


Swing Arms for 1 monitor - Swing Arm Acrobat Range

Swing Arm Acrobat Range
   Bolt Through desk, Standard
 SA: Standard Swing Arm         Larger picture
       340mm arm, Single Monitor, pole ht 270mm, Direct Mount  (BKorPSorST  SAorSAL BT SI DM): $226+GST
   Desk Clamp instead of bolt through, 340mm arm, pole ht 280mm  (BKorPSorST  SAorSAL DC SI DM): same price

BK = Black,   PS = Polished Silver (shiny),   ST = Silver Textured (matt),   DB = Dental Beige (where available)

Options:
   Swing Arm for light weight monitor (1.5 to 4.5kg)
with standard arm, SAL: no charge
   Extra Long Arm (450mm)
 (3kg-7kg load) SX instead of SI, for each arm - discontinued
   Quick Release mount QR (instead of DM Direct Mount), for each monitor - discontinued

   Extra post height, i.e. a single monitor arm on a 4-segment or 7-segment pole:
      For a 4-segment post: Pricing is the same as a swing arm for 2 monitors.
      For a 7-segment post: Pricing is the same as a swing arm for 3 monitors.

       Pictures:  Direct Mount               Large diagram of desk clamp

Swing Arm Conversion Kit from 1 monitor to 2 monitors:
Converts a swing arm for 1 monitor into a swing arm for 2 monitors. Includes the long bolt that runs through the post,
and the extra swing arm, and accessories as required.
     For bolt-through, direct mount configuration: $245+GST

Swing Arms for 2 monitors    see pictures above

Swing Arms,
   Bolt Through desk, Standard,

              340mm long, two monitors, Direct Mount (BKorST SAorSAL BT DB DM):  $382+GST
   Desk Clamp for 2 monitor swing arm (BKorST SAorSAL DC DB DM): same price

Options:
   Swing Arm for light weight monitor (1.5 to 4.5kg)
with standard arm, SAL: no charge
   Extra Long Arm (450mm)
 (3kg-7kg load) DEX instead of DB, for each arm - discontinued
   Quick Release mount QR (instead of DM Direct Mount), for each monitor - discontinued

       Pictures:  Direct Mount  


Swing Arms for 3 monitors

Swing Arms,
    Bolt Through desk, Standard
340mm arm, 3 monitors, Direct Mount (BKorST SAorSAL BT TR DM):  $543+GST
    Desk Clamp not available for triple

Options:
   Swing Arm for light weight monitor (1.5 to 4.5kg)
with standard arm, SAL: no charge
   Extra Long Arm (450mm)
 (3kg-7kg load) TEX instead of TR, for each arm - discontinued
   Quick Release mount QR (instead of DM Direct Mount), for each monitor - discontinued

       Pictures:  Direct Mount  

For Wall mounts: click here (jumps down this page)


Articulated Arms - Desk or Wall mount

See also Visidec Focus - Articulated Arm below.

                

The Articulated Arm extends 600mm from the centre of the mounting post.  The Extra Long version extends 710mm.
Available with the Bolt Through post as shown in the picture, and Wall Mount (see below). (Packed weight for shipping: 3.5kg)
The monitor mount centre is 227mm above the desk when the arm (both parts) is exactly horizontal.
Arm height adjustment range is up to 90°, i.e. about ±255mm, can be more up or more down depending on the weight adjustment setting.
A 9mm dia hole is required in the desktop for mounting the pole.
A screwed rod goes through the hole vertically and is fixed with a nut and washer underneath the desk.
For more mounting details scroll down to the end of this page.  

NEW   Acrobat Articulated Arm   has Portrait/Landscape Rotation.

  Articulated Arms - Table of data (.jpg)      Pictures & Mounting Options (.jpg)

  Articulated Arm (Desk Mount) data (60KB)
  Detailed data on Desk Mount Articulated Arm (.pdf 245KB, opens new window))

Overall length from centre of post swivel joint to back of LCD monitor
   Standard Model: 600mm,      Extra Long: 710mm
Arm dimensions:
  Standard Model: Post to elbow: 260mm,  Elbow to monitor mount: 340mm,
  Extra Long:         Post to elbow: 260mm,  Elbow to monitor mount: 450mm
Post Height: 185mm    Post & Elbow height: 260mm                            Large diagram of desk clamp

Articulated Arm, Desk Mount (600mm, supports 3 to 9kg monitor)
    Bolt Through, Standard 600mm, Direct Mount (BKorPSorST ATorATL BT SI DM): $265+GST
    Desk Clamp,   Standard 600mm,  Direct Mount (BKorPSorST ATorATL DC SI DM): $283+GST

BK = Black,   PS = Polished Aluminium,   ST = Silver Textured,   DB = Dental Beige (where available)

Options:
   Swing Arm for light weight monitor (1.5 to 4.5kg)
with standard arm, ATL: no charge
   Extra Long Arm (710mm)
(3 - 7kg) SX instead of SI - discontinued
   Quick Release mount QR (instead of DM Direct Mount) - discontinued

 Large Pictures showing method of mounting at back of monitor:  Direct Mount   
    (The pictures actually show wall mounts, the arrangement on the back of the monitor is the same.)

Articulated Arm, Wall Mount Versions   Articulated Arm, Wall Mount Technical details  (new window)
   The dimensions of the part which touches the wall are 90 x 55 mm.
   Mounting holes are provided, and also nylon wall plugs and screws.
   Normally two are used near the top edge and one near the bottom edge.
   These have been found to give sufficient support if the wall plugs fit the drilled holes properly.
   However responsibility lies with the customer to check that the installation is strong enough.
   Dynabolts (not supplied) which expand in the hole when tightened, could be used.

Articulated Arm, Wall Mount, (600mm, supports 3 to 9kg monitor)
    Standard length, Direct Mount (BKorPSorST ATorATL DW SI DM): $283+GST  

BK = Black,   PS = Polished Aluminium,   ST = Silver Textured,   DB = Dental Beige (where available)

Options:
   Swing Arm for light weight monitor (1.5 to 4.5kg)
with standard arm, ATL: no charge
   Extra Long Arm (710mm)
(3 - 7kg) SX instead of SI - discontinued
   Quick Release mount QR (instead of DM Direct Mount) - discontinued

For mounting details, scroll down to the end of this page.


See also the Telehook Articulated Arm: click here (jumps to Telehook page)

Wall Mounts
for LCD flat screen displays
with adjustable screen position

Without arm

See also Visidec wall mount below

‘Display’ Wall Mount,
black or silver texture (BKorST),
with VESA plate for both 75mm &100mm
Distance from wall to rear of LCD:
   Direct Mount version: 85mm

The ball joint behind the monitor, has a rotational adjustment range of ±40°.

Direct Mount single (BKorST DS DW SI DM): $105+GST
There is little room behind the Direct Mount version for a screwdriver for mounting..

Quick Release with key lock - discontinued
     (Packed weight 1kg)

 

Detail pictures:     Direct Mount
      Display Range - Wall - Ceiling mount - Freestanding

 

Direct Wall mount for 6 monitors

2 rows of 3
  chrome poles, direct mount  (BC DS DW HEX DM): $1656+GST


See also the Telehook range of
wall mounts for large flat screens & projectors: click here
(jumps to Telehook page)


Wall Mount
with Swing Arm Acrobat
   
click here

 (link to Atdec site, needs IE browser)

Distance between back of monitor and centre of the pole (or vertical mounting cylinder next to the wall):
Standard arm: 340mm (3kg-9kg load)
   Direct Mount (BKorST SAorSAL DW SI DM): $226+GST
         (Packed weight: 2.6kg)

Options:
   Extra Long Arm
(450mm)  (3kg-7kg load) - discontinued
   Quick Release mount QR - discontinued

   Swing Arm for light weight monitor (1.5 to 4.5kg)
                   with standard arm, SAL: no charge

   Slat Wall Single (340mm) - Standard  
      BKorPSorST SAorSAL  SW  ..?..  SI  DM: $226+GST
                                      (specify Slat Wall type)

 See also the Telehook wall mount arm: click here


Wall Mount Articulated Arms
         ... see just above this frame

See also
   the Telehook wall mount articulated arm: click here


Conversion Kit
from Direct Mount to Quick Release - discontinued

For mounting details, scroll down to the end of this page.


 

Freestanding Arrays
of LCD Monitors

See also Visidec Freestanding Double Horizontal above

Freestanding Double
  2 LCD monitors horizontally:
Adjusts to suit monitors from 15" to 21"
2 poles 455mm high - black or chrome
Monitors pivot ±40° on new clean look Donut brackets  Large picture
 BK DS FS DB DM   $485+GST
 BC DS FS DB DM   $557+GST
  Tech Drawings: click here (.pdf file)

  Technical Specs of Freestanding  (.pdf 215KB)

Freestanding Double
  2 LCD monitors vertically:
Adjusts to suit monitors from 15" to 21"
1 pole ___mm high - black or chrome
Monitors pivot ±40° on new clean look Donut brackets
 BK DS FS DV DM   $387+GST
 BC DS FS DV DM   $437+GST

Freestanding Single
Pole is 335mm high
BKorBC DS FS  SI  DMorQR...
Black pole, Direct Mount DM: $373+GST
Chrome pole, Direct Mnt DM: $398+GST
Larger picture 1
Larger picture 2

 

 

Freestanding Quad
  4 LCD monitors
(2 rows of 2)
Pole is 700mm high
Black pole    BK DS FS QD DM: $629+GST
Chrome pole BC DS FS QD DM: $700+GST
     Freestanding Quad (Atdec site)

 

Freestanding Hex
  6 LCD monitors
(2 rows of 3)
Easily adjusts to suit monitors from 15" to 21"
Black or Chromium Pole
Donut brackets allow ±40°
Lever locks for easy height adjustment. BK black or BC Chrome.
BKorBC DS FS HEX DM
Black BK:    $1513+GST
Chrome BC: $1656+GST
       Large picture

  Display Range - Wall - Ceiling mount - Freestanding
      (Atdec site)

 

For mounting details, scroll down to the end of this page.

    Pictures of Direct Mount



"Clamp on to Pole" Models - for 1, 2 or 3 monitors

      See also POS Range - Pole Mounts below

Poles with Donut mounting
  - one monitor (up to 11.5kg)

2008: These now come as combo packs with desk clamp & bolt through options included.
See above:
  Display Donut Pole Single, Double & Triple

Donut Assembly (one per LCD monitor) 
BKorDB DON42 SI DM
Black Donut Assembly 42mm dia pole,
direct mount, each: $95+GST (1 required)
Also required: Pole 420mm high (see below)
   (DB - Dental Beige, DM = Direct Mount)
Note: 50mm dia Donuts are available DON50: same price

   Large picture of Donut Assembly

Donut Assembly - for 2 Monitors Back to Back
for 42mm dia pole,
        BKorDB DON42 BB DM  $185+GST
Note: 50mm dia Donuts are available DON50: same price

Also required:
Pole, Black
420mm high, Bolt Through, Single
               BK PA42 BT DB SI  $60+GST

Pole with Desk clamp (DC instead of BT),
                                           add $15+GST


Clamp for mounting the LCD Monitor onto a pole 42mm dia. (i.e. no swing arm or articulated arm).
BKorGTorST CL SI DM   $130+GST
The ball joint holds up to 11.5kg screens.

Sizes of the Clamp poles - (measured from desk to top of pole)
· Single: BT 350mm, DC 360mm
· Double: BT 760mm, DC 770mm
· Triple: 1160mm BT ONLY

Colour: Pole and clamp are normally the same colour: black or grey or silver (picture is wrong).
A chrome pole is available: add $40+GST

For mounting details, scroll down to the end of this page.

Poles with Donut mounting
 - two monitors   Larger picture

Donut Assembly (up to 11.5kg)
(one per LCD monitor)
Black Donut Assembly 42mm, direct mount
BK DON42 DM each: $95+GST (2 required)

Pole for 2 monitors,
Black texture

                   BKorST PA42 BT DB  $75+GST
   750mm high Assembly, Bolt Through Single

Note: Chrome poles are discontinued.

Pole with Desk clamp (DC instead of BT), add $15+GST

Poles with Donut mounting
 - three monitors  

Pole for 3 monitors, (3 Donuts also required, see above)
Black texture

                   BKorST PA42 BT TR  $90+GST
   1150mm high Assembly, Bolt Through Single


Bolt Through versions (BT)
Bolt Through Single, Direct Mount: $250+GST
Bolt Through Single, Quick Release: $270+GST
   Pole height 350mm

Bolt Through Double, Direct Mount:  $380+GST
Bolt Through Double, Quick Release:  $415+GST
   Pole height 760mm, 2 monitors vertically

Bolt Through Triple, Direct Mount:  $520+GST
Bolt Through Triple, Quick Release: $570+GST
   Pole height 1160mm, 3 monitors vertically

Display Quad: 2 rows of 2 monitors
Bolt Through Quad, Direct Mount:  $560+GST
Bolt Through Quad, Quick Release:  $610+GST

Desk Clamp versions (DC)
Desk can be up to 95mm thick.
Desk Clamp Single, Direct Mount:  $280+GST
Desk Clamp Single, Quick Release: $305+GST      DM=Direct Mount
Desk Clamp Double, Direct Mount:  $410+GST    QR=Quick Release
Desk Clamp Double, Quick Release:  $450+GST

    Pictures of Direct Mount and Quick Release


Point of Sale POS Range - Pole Mounts

 

POS - Multi:  Single monitor, or Two Back to Back

Suits LCD Flat Panel Displays from 30cm (12”) to 56cm (22”)
Suits 75mm x 75mm (3” x 3”) and 100mm x 100mm (4” x 4”) mounting hole patterns

Supports a maximum weight of 11.5kg (25.3lbs)
Display height 330mm (13”)
Display can be fixed or rotate 90°, 180°, 270° or 360°
+/-40° angular adjustment
Portrait/landscape rotation
  Security features include:
      Internal cable management
      Mount from either top or bottom of work surface
      Concealed mounting hardware
      Display security cable fixing point
Colour: Black

Available in Single, or Back to Back configuration (Kit Sold Separately)
Direct Mount.

SBK-POS-BTM-SI-DM   Single            POS-Multi: $
SBK-POS-BTM-BB-DM Back-to-Back POS-Multi: $

  

More Pictures & specs of
Single  &  Back to Back Double


Samsung LCD Mount

Samsung 210  and Samsung 240T Mount, single monitor $106+GST

 

Keyboard Support Tray Arm

An arm with tray, the arm can mount on the pole of a BT (bolt thru desk) or DC (desk clamp) model, or can mount on a wall beneath a wall mount LCD mount. It moves horizontally around the pole, not up or down.
Supports up to 5kg keyboard.
(There is no Articulated arm version.)  Picture of Standard Keyboard Support on BT (bolt thru desk)

Swing Arm Mount (BT bolt thru desk, or DC desk clamp) BKorST KB SA SI   $152+GST  
Specify colour (normally same colour as the arm: BK=Black, ST=Silver Texture)  
Extra Arm Length 450mm  add $20+GST

Wall Mount, standard   BKorST KB DW SI  $210+GST             Data sheet with dimensions  (.pdf file)
Extra Arm Length 450mm  add $20+GST


  Pictures of the Mounting Arms & Devices: click here - lots of pictures  (.pdf file, 1.6Mb)

  Swing Arm Comparison Chart with a lot of detail  (.pdf file)

   Delivery time: small quantities: usually within a week.

   The standard gas strut holds 2.5 to 6kg.   If monitors are heavier, please specify 'heavy duty' (additional cost).


Mounting Details

Mounting:  Options for mounting the LCD screen to the arm  

Display Types:   Display Range - Wall - Ceiling mount - Freestanding    Freestanding Double (.pdf)    Freestanding Quad (.pdf)

Swing Arms:     Bolt Through (.pdf)     Desk Clamp (.pdf)      Wall Mount (.pdf)


Freight approx $20+GST

Desk mount Arms: Brochure with details and quote / order form: click here (pdf file 262KB)


VESA Mount Compliance Explained

The Video & Electronics Standards Association of USA (VESA) has issued suggested standards for the attachment mounting systems for electronic visual displays. This is how the mount attaches to the display itself.

Whilst these standards are quite detailed the basic details of the standards involve the size of the display and the relevant spacing and sizing of the hole to mount the display.

Screen Size

12 inch to 23 inch (305mm to 583mm) Displays (most Computer Monitors).
Hole pattern: 4 holes M4 screw thread
     75mm x 75mm     (3”x3” approx.) or
     100mm x 100mm (4”x4” approx.)

23 inch to 30.9 inch (584mm to 787mm)
Hole Pattern: 6 holes M4 screw thread
      100mm x 200mm (4” x 8” approx.)

31 inch to 90 inch (787mm to 2286mm)
Hole Pattern: increments of 8 inches (200mm)
     Up to 50 kg M6 screw thread         Over 50 kg M8 screw thread

If you require additional details please refer to: http://www.vesa.org/

Any user should use their own investigations to ensure that any panel they decide upon complies with these standards.