Download
software, device drivers: click here
then scroll
down to subheadings 12 BIT ANALOG TO DIGITAL CONVERTER (A/D) or POCKET
DIO MODULE
The expansion kit allows up to 16 modules to be connected to one printer port.
Software
Programming:
The data acquisition software provided gives examples in
how to program the A/D signals in C, PASCAL and BASIC languages.
M17032 Parallel Port 12 Bit A/D 0 - 5V: $190+GST
4/06
M17033 Parallel Port 12 Bit A/D Screw Terminal Board: $95+GST
M17034 Parallel Port Digital I/O, 8 digital input and 8 digital output lines:
$190+GST
M17035 Parallel Port 8 Opto 8 Reed Relay Terminal Board for
M17034 above: $210+GST
M17036 Parallel Port Extension Kit: $95+GST
The
Pocket A/D is an advanced 12-bit, switched-capacitor, successive-approximation,
analog to digital converter which connects to the centronic printer port
of PC/AT, PC/386, PC/486, or compatible computers.
It is a high precision
data conversion system and provides eleven 12-bit analog to digital channels.
With parallel port connection it is particularly suited for notebook and
laptop computers.
Eleven 12 bit analog input channels
Voltage range: 0 to 5V or 0 to 10V
Conversion time: 500 us, Inherent sample & hold
Current consumption: 60
mA
Linearity error: + 1 LSB
Power adapter: DC 9V, 500 mA
Power LED,
Signal access LED
Each module has a unique address, DIP switch selectable
A/D identifier address
Cascadable with expansion kit to support up to 16 modules
I/O
Port Address
The I/O port address is &H3BC, &H378 or &H278 depending
upon the printer port setting.
LED Indicators: Power LED and Signal Access
LED.
Identifier Address: This is dip switch selectable and must be set to
a unique identifier address for each pocket A/D module connected.
ON is 0 and OFF is 1.
Software Programming:
The data acquisition software provided gives examples in how to program the
A/D signals in C, PASCAL and BASIC languages.
Package
Contents:
Pocket A/D MainsPower Adapter 9VDC 0.5A, Expansion cable, Operation
Manual, Software disk, Data Acquisition S/W Manual
The
Pocket A/D terminal board provides the standard voltage divider circuit for the
parallel port pocket A/D modules.
It supports 11 channels
terminal loop
and the maximum input voltage for each channel is 0 to 5V DC or 0 to 10V DC.
An LED on the board displays power on status.
Plugs
into the parallel port A/D modules (M7031 & M17032)
Provides terminal
blocks & breadboard area
Supports 11 channels terminal loop
Maximum
input voltage for each channel is 0 to 5V or 0 to 10V
On board LED indicates
power on status
Packing Contents: A/D Terminal Board, Operation Manual
The
Pocket digital I/O data acquisition box provides 8 digital
input and 8 digital
output lines and can be connected to the
centronic printer port of PC/AT,
PC/386, PC/486, Pentium
or compatible computer. With parallel port connection
it is
particularly suited for notebook and laptop computers.
Supports 8 digital input and 8 digital output lines
Digital Input:
Logic
0: 0.8V max, 2.0mA max.
Logic 1: 2.0V min.
Digital Output:
Logic 0: 0.5V max, 24mA max.
Logic 1: 1.2V min.
Current Consumption: 100mA, Power adapter: DC 9V, 500mA
Can use the digital
I/O board (M17035, next item) which provides:
8
channel opto isolated digital input and 8 channel relay output, and screw terminals
for external wiring.
I/O Port Address: The I/O port
address is &H3BC, &H378 or &H278 depending upon the printer port setting.
LED Indicators: Power LED and Signal Access LED.
Identifier Address: This
is dip switch selectable and must be set to a unique identifier address for each
pocket digital I/O module connected.
ON is 0 and OFF is 1.
Software
Programming
The data acquisition software provided gives examples in how
to program the digital signals in C, PASCAL and BASIC languages.
Package Contents:
Pocket DIO Power Adapter 9VDC 0.5A, Expansion cable, Software disk, Operation
Manual, Data Acquisition S/W Manual
The 8 channels relay output / photo isolator input board for the parallel port pocket digital I/O module (M17034) provides relay output functions and photo isolator input functions.
The relay output part provides 8
single pole single throw (SPST) relays to drive 8 different output channels.
Each relay channel can be used to control ON/OFF of external devices, to drive
external high power relays, to activate alarms, etc.
The photo isolator input
part provides 8 photo couple digital input channels,
which allow the input
signals to be completely floated and prevent the ground loop. 
8 channel digital input and 8 channel digital output box
Supports 8 relay
output channels and 8 photo coupled input channels
Allows the photo input
signals to be completely floated and prevent ground loops
Built-in screw terminal for easy wiring
LED status indicators
Support
information for sensor application
Photo coupled
isolated input:
Input response time: 100us minimum
Input
voltage: 15V DC max. for each opto input channel
Maximum voltage of logical
output channel is 15V DC
Maximum sink current of logical output channel is
80 mA.
Max contact rating for relay: 120V AC/DC 1
amp
Attraction time for relay: 3 ms, Fall off time for relay: 2 ms
Isolation
resistance for relay: 100M ohm
Life expectancy for relay: 5 million operations
at full load
The Normal Open (NO) and Common contacts (COM) of each relay
is brought out to the screw connector
Breakdown voltage: AC/DC 500V min
Input Current: 80mA max. for each isolated input
Input voltage: 15V DC max
for each isolated input
LED indicates which channel is activated
Isolated or non-isolated modes selectable
Jumpers are used to select isolated
or non-isolated mode.
When the jumpers are shorted, the channel is set to
non-isolated mode and when open, to isolated mode.
M17043 Parallel Port Expansion Case: $60+GST
This expansion kit provides 5 parallel expansion sockets and enables
5 Pocket A/D (M17031, M17032) or
pocket digital I/O (DIO) modules (M17034)
to be connected at one time.
It can be daisy chained to allow support of up
to 16 modules.
Contains 6 parallel connectors
Connect 5 pocket
A/D or pocket digital I/O modules
Daisy chain to provide a maximum of 16 pocket
A/D or pocket digital I/O modules in one computer system
Packing Contents: Expansion board, Expansion power cable ( 5 cables), 9V, 1000mA power adapter, Operation Manual
