Shorthaul Modems

---

Esis Pty Ltd - Australia - Ph 02 9481 7420  Fax 02 9481 7267  www.esis.com.au 
E-mail: click here       Go to Esis main page

---

Go up one level to Industrial Modems     Converters (RS232/422/485)

This page:   IC-150 Short Haul Modem      M10056  Short Haul Modem

IC-150 Short Haul Modem

Use twisted pair to extend your RS-232 data distance to up to 10Km!

The IC-150 Short Haul Modem allows you to connect the RS-232 ports of remote devices for fast and easy file transfers and data sharing. Save on the cost of extra modems by installing a pair of these economical units and connecting them up with twisted pair cable.         lhlo        m n s zmxvzqd

Transfers can take take place over distances of up to 10km using either 4 wire (for Full Duplex) or 2 wire (for Simplex) telephone line. The nonpowered Line Driver facilitates efficient transmission and reception of serial data without requiring an external power source.

The unit drives your data at various speeds up to 19,200 bps over distances up to 800m using 24-gauge
wire (transmitting at 110 bps over distances up to 10km).
This compact unit plug directly into the back of your asynchronous terminal, which saves
the space that a stand alone unit would use, and also eliminates the bulk and cost of a RS-232 interface (which must have a + 12V DC source) and therefore requires no separate outlet or power supply.

It provides 1,500VAC lighting surge protection and excellent noise rejection through
the use of differential circuitry. The unit is switch-selectable for DCE/DTE.
The Line Driver provides asynchronous transmission and operates full duplex over four wires.
At slower speeds, the distance increases.
Transmission performance may vary depending on operating conditions and wire gauge.

Specifications

No external power supply required
DCE/DTE selection
Long distance transfer via economical cable
Analog loop back
Compact Size       IC-150: for 1: $90+GST each,     for 2 or more: $80+GST each

             

Function	Specification   IC-150 Shorthaul Modem
Power Consumption	No External Power Required. Power Derived From RS-232 Interface Any of the pins 4,5,6,8,20 must carry + or - 9VDC.
Connections	RS232: DB25F female     Twisted pairs: 4 screw terminals or RJ11 jack
Data Rate	110-38400 bps
Cable Distance	@110bps: 10Km (Max),   with 24AWG two twisted pairs @1200bps: 7km @2400bps: 5km @4800bps: 3.5km @9600bps: 2km @19200 bps: 800m (Max)
Function-SW1	DCE, DTE, LOOP BACK Selection
Function-SW2	Full Duplex, Simplex Selection
Enclosure	Plastic
Weight	60g
Dimensions (L x W x H)	74.5 x 54 x 18.5 (mm)

When in Full Duplex mode, only software handshake may be used, i.e. Xon/Xoff or ETX/ACK, via TD and RD.

When in Simplex mode, only hardware handshake DTR/DSR is applicable.

The unit is powered from the RS232 port,  > +9VDC is required.
Any of the pins 4,5,6,8,20 must carry + or - 9VDC.

In addition to the TD line, the computer or terminal must also support at least either the RTS line or the DTR line or both lines.

Switches (3 position):

SW1:         DCE       ||         DTE                 ||      Loop Back

SW2:  Full Duplex    ||   if SW1 is DCE, Tx only   OR   if SW1 is DTE, Rx only   ||    if SW1 is DCE Rx  OR  if SW1 is DTE Tx only

M10056  Short Haul Modem - Line Driver

This is a similar product made by a different manufacturer.

This short haul modem is able to transmit serial data over transmission distances up to 10 000m at 300 Baud or 800m at 19200 Baud.
No external power supply is needed. It provides excellent noise rejection as well as 1500 Volt lightning surge protection.
It is configurable as DCE or DTE with full duplex operation.    Data: click here
One unit is required at each end of the link.
     M10056  Short Haul Modem - Line Driver:  $95+GST,     for 2 or more: $85+GST each