Examples of Automatic Environmental Stations

Standard Automatic Weather Station

SL5-1L: 8+ channel µSmart Logger, 128K readings (512KB),
                                with operating firmware, gel cell battery
TA1 Air Temperature Sensor
TS1 Soil Temperature Sensor
TG1 Grass Temperature Sensor
HU1 Relative Humidity Sensor
SR2 Solar Radiation Sensor
AN2 Anemometer, includes cups
WD2 Wind Direction Sensor, includes vane
RG(X) Tipping Bucket Rain Gauge, choose between 0.2, 0.5 or 1.0mm per tip
LH3 Lockable Data Logger Housing ( medium )
SS4 Sensor Shelter ( to suit 3 sensors )
SP5 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
CF1 Instrumentation Shipping Case, foam lined

Construction Site Automatic Monitoring Station

SL5-1L: 8+ Channels, 120K readings, gel cell battery, with LCD readout
TA1 Air Temperature Sensor
HU1 Relative Humidity Sensor
AN2 Anemometer, includes cups
WD2 Wind Direction Sensor, includes vane
RG(X) Tipping Bucket Rain Gauge, choose between 0.2, 0.5 or 1.0mm per tip
LH5 Lockable Data Logger Housing ( large )
SS4 Sensor Shelter ( to suit 3 sensors )
SP10 Solar Panel ( 10Watts ) if using telemetry, otherwise SP5
MK2 Solar Panel Mounting Kit ( 10Watts ) to suit 2mtr mast
MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
BT4 42AH 12V Sealed Lead Acid Battery if using telemetry or running WA1
WA1 Wind Alarm Control Unit with LCD readout

AL1 Alarm Light, pre-set to trigger when wind velocity exceeds stated speed (OUTDOOR), OR/
AL2 Alarm Light/Siren, pre-set to trigger when wind velocity exceeds state speed OR/
AL3 Alarm Light, pre-set to trigger when wind velocity exceeds state speed (INDOOR)

The ALx devices use a lot of current.

CF1 Instrumentation Shipping Case, foam lined

Wind Characteristic Measuring Station

SL4-1L: 4 channel, 120K readings, with operating software, gel cell battery
AN2 Anemometer, includes cups
WD4 Wind Direction Sensor with sine & cosine output for Sigma Theta calculation, includes vane
LH3 Lockable Data Logger Housing ( medium )

MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
    If doing wind profiling, will need (instead of 2m mast above):
    MM12 10m mast & use Anemometers at 2m & 10m (& maybe 5m) heights
    MK9 Extra Cross Arm assemblies for extra Anemometers

SP5 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
CF1 Instrumentation Shipping Case, foam lined

Evapotranspiration Station using the Penman/Monteith Formula

SL5-1L: 8+ channel, 120K readings, with operating software, gel cell battery
SR2 Solar Radiation Sensor
TA1 Air Temperature Sensor
HU1 Relative Humidity Sensor
AN2 Anemometer, includes cups
RG(X) Tipping Bucket Rain Gauge, choose between 0.2, 0.5 or 1.0mm per tip
SP5 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
MM7 Farmers AWS with Short Cross Arm & Upper Mast + In-ground Mount
SS4 Sensor Shelter ( to suit 3 sensors )
LH3 Lockable Data Logger Housing ( medium )
CF1 Instrumentation Shipping Case, foam lined

Bush Fire Station

SL5L: 8+ channel, 120K readings, with operating software, gel cell battery
TA1 Air Temperature Sensor
HU1 Relative Humidity Sensor
AN2 Anemometer, includes cups
WD2 Wind Direction Sensor, includes vane
RG(X) Tipping Bucket Rain Gauge, choose between 0.2, 0.5 or 1.0mm per tip
SS4 Sensor Shelter ( to suit 3 sensors )
SP1 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
LH3 Lockable Data Logger Housing ( medium )
CF1 Instrumentation Shipping Case, foam lined

Mobile Bush Fire Station with Real-Time Monitoring

TA1 Air Temperature Sensor
HU1 Relative Humidity Sensor
AN2 Anemometer, includes cups
WD2 Wind Direction Sensor, includes vane
LH3 Lockable Data Logger Housing ( medium )
2 * SS1 Miniature Sensor Shelter ( to suit 1 sensor each )
MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
CM2 Interface Cable, RS232 - DB9
SI2 4 Channel Serial Interface Unit for Real-Time Read Out
CF1 Instrumentation Shipping Case, foam lined

NOTE: Display of the information will be through a laptop, the Station will receive its power via this computer whilst the data is being collected. This station is designed to be roof mounted on the emergency vehicle, making it portable, easy to assemble, light weight and has very low power consumption.

Lightning Strike Station

2 * LS3 Lightning Strike Sensors
LSC Lightning Strike Controller
MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
LH3 Lockable Data Logger Housing ( medium )
SP1 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
BT4 42AH 12V Sealed Lead Acid Battery
AL1 Alarm Light
2 * AT1 Alarm Timers
S2K Switch & 2 Keys
SPB1 Switch Push Button - connected to station &/or
SPB2 Switch Push Button - Remote Access
CF1 Instrumentation Shipping Case, foam lined

Remote Monitoring/Communications Options

Telephone:

GSM1 Modem/Telephone, remote site
LH5 Lockable Data Logger Housing ( large )
IG6000 Industrial Modem
BT4 42AH 12V Sealed Lead Acid Battery
SP2 Solar Panel, 10Watts 21Volts
MK2 Solar Panel Mounting Kit ( 10Watts ) to suit 2mtr mast

Radio/Modem:

SD125-U2 U2 UHF Radio ( remote site )
SD125-U2 US UHF Radio ( base )
KPC3 Radio Modem ( remote site )
KPC3 Radio Modem ( base )
LH5 Lockable Data Logger Housing ( large )
BT4 42AH 12Volt Sealed Lead Acid Battery
SP2 Solar Panel, 10Watts 21Volts
MK2 Solar Panel Mounting Kit ( 10Watts ) to suit 2mtr mast

Gas Monitoring Station

MM5 2mtr Metal Mast with Cross Arm & In-ground Mount
LH3 Lockable Data Logger Housing ( medium )
SP1 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
SL4: 4 Channel, 120K readings, with operating software, gel cell battery
4 * ? Gas Monitors as required by Customer
AL1 Alarm Light
2 * AT1 Alarm Timers
S2K Switch & 2 Keys
SPB1 Switch Push Button - connected to station &/or
SPB2 Switch Push Button - Remote Access
CF1 Instrumentation Shipping Case, foam lined

Water Monitoring Station

MM8 Field Equipment Housing & Post with In-ground Mount
SP1 Solar Panel, 5Watts
MK1 Solar Panel Mounting Kit ( 5Watts ) to suit 2mtr mast
SL4: 4 Channel, 120K readings, with operating software, gel cell battery
PH1 pH Sensor
EC1 Temperature Compensated Electrical Conductivity Sensor
WL1 Water Level Sensor
CF1 Instrumentation Shipping Case, foam lined