Jump
to other pages:
Contact
Temperature only measurement devices Contact
Temperature & Humidity
Some Testo instruments feature Topsafe: safe instrument covers for use in the food industry, description, click here.
Emissivity:
Make sure that the Emissivity is set correctly for type of surface material being
measured.
Refer to page 65 of the Testo catalogue 2001.
e.g. Emissivity of Concrete: 0.93, Smooth Ice: 0.97, Iron with rolled
skin: 0.77, Glass: 0.94, Wood:0.94,
Black anodised heat sink:
0.98, Plastics: 0.94, Brass, oxidised: 0.61, Paper: 0.97, Steel,
oxidised: 0.79,
Clay, fired: 0.91, Transformer paint: 0.94, Brick,
mortar & plaster: 0.93
Re-calibration
of IR Thermometers:
The IR thermometers are not re-calibrated
as they are not a particularly accurate way of measuring temperature.
To
check the IR thermometer, use the cup shaped Comparator, part number 0563.9999
$xx+GST.
Have a reference
instrument such as the Testo 110 calibrated.
Insert the 110's probe into one
of the holes in the side of the bottom of the comparator.
Wait for the reading
to stabilise then point the IR thermometer into the top of the cup.
Take into
consideration the correction factor of the 110 and the stated accuracy of the
IR thermometer.
| Testo Non-Contact Temperature Instruments - IR Testo General Products page & Search Testo site (opens new window) |
The
compact 80 mm infrared thermometer fits into any pocket and is always within reach
e.g. for measurements in incoming goods and for checking the cold shelves
in supermarkets.
Also ideal for rapid measurements in the food industry and
in the home.
High accuracy in a critical area for food
Packaging remains undamaged
TopSafe is dishwasher-proof
Display of minimum and maximum values
Scan mode for permanent
measurement
Robust, waterproof protection case (IP65), optional
Practical and compact, pocket-size
High accuracy in the critical
range for food
Water-proof and robust on account of dishwasher-safe
protection sleeve TopSafe (IP65)
Minimum and maximum value display
Scan mode for long-term measurements
Data
Sheet on Testo 805 (pdf file, opens in new tab or window)
Operating
temperature 0 to +50 °C, Storage temperature -20 to
+65 °C
Battery type 3V button cell (CR 2032) Battery life 40 h (typical)
Dimensions
80 x 31 x 19 mm Material/Housing ABS Weight 28 g
Probe
type Infrared
Meas. Range -25 to +250 °C
Accuracy ±3 °C (-25
to -21 °C), ±2 °C (-20 to -2.1 °C), ±1
°C (-2 to +40 °C), ±1.5 °C (+40.1 to +150
°C), ±2% of mv (+150.1 to +250 °C)
Resolution
0.1 °C (-9.9 to +199.9 °C), 1 °C (remaining range)
Battery is included.
0560 8051 testo 805 without TopSafe $156+GST
1/10
0563 8051 testo 805 with TopSafe $181
0560 0810 testo 810, Air and infrared temperature $190+GST 1/10
See
also the new range 'Testo Pocket-size professionals'
which
includes Testo 810: Air temperature and infrared temperature
Data sheet
(.pdf, 500KB)
| ![]() | |
| ||
Quicktemp 825-T4 2-channel IR instrumentboth contact
(surface probe to 250°C, short term 500°C) 0560 8258 testo quicktemp 825-T4 2 in 1 thermometer: see above for price T4
version has: Laser sighting to mark the location of measurement. | ![]() |
Quicktemp 826-T1 & 826-T2 non-contact IR thermometer with alarm -50 to +400°C 0563
8261 testo 826-T1 incl. TopSafe $276+GST 1/10 Testo 826-T2 has additional features:
| ![]() | |
| ||
Quicktemp 826-T3 & 826-T4Both contact (penetration
probe, to 230°C) 0563 8263 testo 826-T3
incl. TopSafe $491+GST 1/10 | ![]() |
The following brochures include full data on Testo 830
Brochure: Measurement Solutions for Refrigeration Technology incl. probes & accessories. See page 34 (.pdf, 54 pages).
Brochure:
Measurement Engineering for Air Conditioning and Ventilation incl.
probes & accessories
See page
43 (pdf file 3MB, 82 pages, opens in
new tab or window)
0560 8301 testo 830-T1 $300+GST 1/10
0560
8302 testo 830-T2 $395
0560 8303 testo 830-T3 $833
0563 8302 testo 830 T2
Set $645
0560 8304 testo 830-T4 $555
0563 8304 testo 830 T4 Set $827
Accessories
for testo 830-T1/T2 & T3
Probes for Testo 830-T2/-T3 & 845Air probes | Surface
probes |
| Testo Non-Contact Temperature Instruments - IR Testo General Products page & Search Testo site (opens new window) |
0560 8310 testo 831 $450G+GST
1/10
0563 8310 testo 831 set with testo 106 $531
0563 8450 testo 845 IR thermometer,
incl software with USB connection & aluminium case $1,673+GST
1/10
0563 8451 testo 845 IR thermometer, incl humidity
probe, software with USB connection & aluminium case $2,095
Probes for Testo 845 - see above
Accessories for testo 845
0636
9784 humidity module (retrofittable for t845) $472
0554 0447 USB power supply
(5VDC 500mA) $55
0554 0610 Recharger incl. 4 NiMH rech. batteries $130
0554
0549 Testo Infrared Printer $546
0554 0568 Pack of 6 thermal printer rolls
$69
0554 0569 Thermal paper for printer (6 rolls) $63
0554 0660 11.3/75.3%rh
calibration set $627
0554 0051 Emissivity tape $167
0554 0004 Heat conduction
paste Silicone $40
Fixed Mount Thermometers - see further down this page dbd
Portable IR Thermometers |
|
Choose from the following temperatures:
-18°C +3°C 63°C 100°C 200°C
3-point
Calibration: $105+GST 4-point Calibration:
$120+GST
Data on Fixed Mount IR Thermometers
Install up to 32
sensors on a single, multidrop network with RS485 interface.
Multidrop Software:$480+GST
Compact
Series - low cost noncontact infrared (IR) temperature sensors.
Includes
Compact CI, Compact MID, Compact GP, Compact GPS, TRS100
Marathon
Series - unique noncontact instruments designed for extremally harsh or space
constrained operating environments.
"Gold medal performance" state-of-the-art,
smart digital electronics, and a built-in user interface, all in a rugged, compact
housing.
MR1S, MA1/MA2, MA1S/MA2S, FR1, FA1/FA2,
FA1G
Thermalert Series - high temperature in process
control systems applications.
Broad temperature range from -18° to 2000°C
(-0° to 3600°F) and -18° to 3000°C (-0° to 5400°F), as well as superior optics
up to 60:1 and 90:1.
Thermalert TX - TX Basic Sensors
that offer outstanding performance and the
- TX smart sensors that
can be easily installed in multidrop configurations with remote addressability.
T3 Plus - an industrial monitor that provides a versatile temperature measurement system for the process industries. The T3 Plus digital electronics are contained in a rugged, wall-mount enclosure. The T3 Plus interfaces with all T-Series Sensors listed above.
Thermalert SX - combines high performance noncontact temperature measurement instrumentation with industry standard two-wire technology. Superior optical resolution of up to 90:1 makes this model indispensable for monitoring temperatures of distant and small targets.
Process Monitoring Systems
- measure temperatures for control of product uniformity and equipment performance.
Thermal imaging systems measuring edge-to-edge temperatures to control product
uniformity.
Plastic, paper, glass, wallboard, cement/line production
MP50
Process Imager, CS100, EC100, ES100, GS100, TIP450, TF100, TRS100, SS100.
Blackbody calibration sources - Designed to verify the calibration of various types of infrared temperature testing equipment.
Automotive
Handheld Infrared Thermometers
Professional automotive diagnostic tools.
3i Series Dedicated portable infrared pyrometers for specialty industrial applications.
Data on Fixed Mount IR Thermometers
Raytek
Marathon MM is the new vision in infrared thermometry.
Available with precision
variable focus, the MM offers:
Real-time Video Monitoring
Wide Temperature Range: -40º to 3000ºC
Optical and Laser Sighting
Field Calibration Software
Marathon MM sensors cover wide measurement
ranges up to 3000ºC, and offer through-the-lens sighting with either laser
target sighting or optional real-time video monitoring.
Now you can monitor
process temperature variations continuously and take immediate corrective actions.
And only Raytek includes software to calibrate this sensor at your own location.
More
information on Marathon Series
Two
wire loop powered, IP65 head S
Optional protective windows
also TXS-LTSF Smart versions with
comms capability (needs HART Adaptor), Alarm 24V 150mA, adjustable set points
New sighting heads and laser sight heads Data
sheet (.pdf file, 76KB): click here
The Thermalert
TX infrared temperature sensors are available in two configurations:
1.
TX Basic Sensors offer outstanding performance when used in single-unit installations.
2. TX Smart Sensors, which have remote addressability, can be easily installed
in multidrop configurations including special ones for monitoring glass and plastics
processes.
TX Series Smart Sensors communicate over a simple loop-powered
2-wire cable using the HART (Highway Addressable Remote Transducer) protocol.
This signal combines industry-standard 4-20 mA output with simultaneous digital
communications.
General Specifications for Thermalert TX:
- Simple, two-wire installation
- Wide temperature range from -18° to
2000°C (-0° to 3600°F)
- Simultaneous 4-20 mA and digital output
for smart TX sensors
- Compact, rugged sensor with NEMA-4(IP 65) rating
- Advanced signal processing
- Point-to-point or multidrop installation (up
to 15 sensors)
- Windows software for remote configuration monitoring
- Wide choice of focus distances
- Special models for glass and plastics applications
Optional smart HART adaptor with windows software $375+GST
Codes
used in part numbers:
LT (Low Temp), LT0 (Low Temp), LTP (LT
with (Plastic Fresnel lens), MT (Medium Temp), HT (High Temp),
G5 (Glass), P7 (Plastics)
SF (Standard Focus), CF (close
Focus) See the small tables at right
side of page 2 of the data sheet (link above).
Thermalert | Distance : Dia of spot | Temp range | Prices need to be confirmed w/o GST |
|
RY-TXC-LTP-SF Low Temp (Plastic Fresnel lens) |
15:1 | -18 to 500°C | $1540 |
| RY-TXC-LT-SF Low Temp |
33:1 | -18 to 500°C |
$1830 |
| RY-TXC-MT-SF Medium Temp | 33:1 | 200 to 1000°C |
$2415 |
| RY-TXC-HT-SF High Temp | 60:1 | 500 to 2000°C |
$2415 |
| RY-TXC-HT-CF2 High Temp, Close Focus 2 |
32:1 | 500 to 2000°C | $2415 |
| RY-TXC-HT-SFW High Temp, Std Focus, Water Cooling |
60:1 | 500 to 2000°C | $3135 |
| RY-TXC-LT-CF2 Low Temp, Close Focus |
30:1 | -18
to 500°C | $1830 |
| RY-TXC-LT-SFW Low Temp, 2-wire, opt W.C. |
33:1 | -18 to 500°C |
$2550 |
|
RY-TXC-MT-CF2 2-wire, Close Focus | 33:1 |
200 to 1000°C | $2415 |
| Smart Versions | | ||
| RY-TXS-LT-SF | 33:1 | -18 to 500°C |
$2120 |
| RY-TXS-HT-SF OPTS | 60:1 | 500 to 2000°C |
$2695 |
| RY-TXS-LTP-SF Fresnel Lens (Plastic Fresnel lens) |
| -18 to 500°C | $1830 |
| RY-TXS-MT-SF Shtf |
| 200 to 1000°C |
$2695 |
|
Windows | |||
|
RY-TX-ACPW AMTIR Window for TX-LT |
|
| $242 |
| RY-TX-ACPWM Sapphire Window for TX-MT |
|
| $242 |
Raynger
IP plug-in accessory IR probes The Raynger IP is a
family of plug-in accessory IR probes that
convert a DMM or thermocouple
meter into a close focus, noncontact IR thermometer.
The IP-M is designed
for use with a digital multimeter (DMM),
Chart Recorder or Data Logger and
outputs a signal of one millivolt per degree.
The correlated millivolt
output converts the digital multimeter display into a temperature readout.
A switch in the battery compartment allows for the selection of either C or F
temperature scales.
The
IP-J and IP-K probe models are designed to work with either J or K thermocouple
meters respectively.
All IP models feature a slide switch to control the on/off
function and a sleep mode protects the battery in the event that the unit is accidentally
left on.
The IP is engineered to measure targets as small
as 2.5mm (0.1 inches) and the
probe tip and pencil grip design provide
flexibility when making measurements in tight or
inaccessible areas.
The
IP has a high immunity to thermal shock due to a unique compensated detection
system making it a good choice for problem applications where rapid swings in
ambient temperature are present.
RY-IP-K:
Simulates Type K Thermocouple: $378+GST
RY-IP-J: Simulates Type
J Thermocouple: $378+GST
RY-IP-M:
mV/°C,
or °F, for volt meters, data loggers and chart recorders: $378+GST
Temperature Range -18° to 260°C (0° to 500°F)
Accuracy ±3% of reading or
±5°F (nominal ambient temperature range between 18° to 28°C (64°F to 82°F)
Temperature Coefficient 0.2% of reading or 0.2°C (0.3°F) whichever is greater,
change in accuracy per degree change in ambient temperature above or below nominal
ambient operating range
Emissivity Fixed at 0.95
Spectral Range 8 to 14
microns
Response Time One second
Ambient Operating Range 0 to 63°C (32°
to 145°F)
Relative Humidity 95% RH at 86°F, non-condensing
Power 9V alkaline
battery
Distance to Spot Size 4:1 with minimum spot size of 2.5mm (0.1”)
at 0 distance
for inspecting switchboards, and termite inspections
These cameras are ideal for checking medium to large electrical switchboards, for two main purposes:
- Annual scans for hot spots, to minimise fire risks for insurance purposes
- Condition monitoring of switchboards regular thermal photos can be taken of the switchboard, and elements that are getting hotter over a period of time can be identified and replaced before they fail catastrophically.
The Testo 880 is ideal for these uses as it allows photographs to be taken and stored on an SD card for later analysis and comparison with prior photographs.
The Testo 880-3 is also well suited for pest and building inspectors as it offers a good resolution, 8 colour palettes, and choice of standard or telephoto lenses. The photo storage and USB connection capability enables professional reports to be generated quickly and easily.
Brochure on Testo 880: click here (.pdf file, Testo site, 0563_0880_V4_en_02.pdf)
Testo 880-1: $8372+GST 11/08
Testo 880-2: $10,063+GST
Testo 880-3: $11,755+GST
Testo
880-3 Pro kit: $13,445+GST
For switchboards, see also: Elite Pro and SmartReader Plus 3
ELITEpro Recording Poly-Phase Power Meter (opens new window or tag)
SmartReader Plus 3 accurately records AC current and voltage
The
Chino TP-L is a thermopile based imaging camera for industrial alarm monitoring
where single point sensors are not suitable, and line scanners or high end thermal
imaging cameras are too expensive.
With PC software and ethernet communications, and a high level of functionality, the TP-L is ready to install Monitor electronics, busbars, motors and gearboxes, pipe blockages, and temperature sensitive product, with wide coverage and at very low cost.
Temperature range -20 to 300°C using 10 micron center wavelength
Accuracy 2% or 3°C - whichever larger,
Resolution 0.5C (At black
body temperature of 100°C)
Resolution 2000 pixels - at 3fps update
speed (1fps for alarm output)
Radius Resolution: 21.8mrad
Viewable area 60x60deg. - Radial res. 21.8mrad
Emissivity adjustable
0.1-1.0
Fixed focus
Ethernet: 10BASE-T/100BASE-TX
Up to 4 sensors can be connected to a LAN
Power supply 12-24V DC, 2VA
Two relay alarm outputs (Non voltage contact output)
PC software
included for setup and imaging
IP65 / NEMA4 (w/ provided exclusive cable
and tripod screw) Standards: CE (EN61326 Annex A)
Working
Temp: -10 to 50°C, Working RH: 10 to 80%RH (No dew condensation)
Casing: Polycarbonate (Color: Black) Weight: Approx. 150g (sensor
only)
Data
sheets (.pdf file, 4 pages, opens in new tab or window)
Priced
from $3250
SPECIAL OFFER - saving
of up to $500 per unit - this offer is valid until the end of FEBRUARY 2010
FLASH
INTERACTIVE DEMO ---- www.chino.co.jp/english/products/FlashDemo.html
(opens in new tab or window)
TP-L0260EN
Standard
TP-ZCC1 (optional) Air Purge Case
Applications: Swine Flu detection Entrance control Detecting hot-spot in electronics
(pdf files, open in new tab) Monitoring server room Monitoring fluids Monitoring overheating gears, etc.