Testo Sound, Light, CO CO2,
Water Quality, Moisture, etc

Testo 815  &  Testo 816   Sound Level Meters
- Class 2L

The Testo 815 and Testo 816 (both Class 2L) provide an accurate and low cost measurement of sound.
Sound level meter, including microphone, wind protection cap and battery.

The ideal instrument for daily use.
Whether it is for air conditioning or heating, disco noise, machine noise or noise in combustion systems, testo 815 is the ideal partner.

Common features:
• Accuracy class 2 to IEC 60651
• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to Characteristic A and C
• Maximum and minimum value memory
• Built-in tripod knuckle screw (1/4 inch)
• High accuracy level (Class 2)
• Switchable time weighting Fast / Slow

Common specs:
Accuracy:  ±1 digit  Class 2   ±1.0 dB
Resolution:  0.1 dB
Battery type:  9V block battery
Oper. temp.:  0 to +40 °C
Storage temp.:  -10 to +60 °C
Other features:  Section measurement ranges: 30 to 80 dB;  50 to 100 dB; 80 to 130 dB
Time weighting: FAST 125 ms setting / SLOW 1 s setting
Pressure dependency: -0.0016 dB/hPa

Testo 815 display shows:
• Frequency Weighting   e.g. dB(A)
• Current value              e.g. 59.3   (in large digits)
• Time weighting            e.g. Fast
• Section measurement range e.g. 32 - 80        See below for price.

Dimensions: 255 x 55 x 43 mm,  195 g
Includes microphone, wind protection cap and battery

   Brochure on Testo 815 & 816 (.pdf file, 1 page, opens in new tab or window)

Testo 816 Class 2L

Sound level meter, incl. microphone, wind protection cap, battery, stereo jack 3.5 mm, in a practical measurement case

Compared to testo 815, the larger model has additional features which make it ideal for assessors, workplace measurements and for measuring industrial and environmental noise.

Additional benefits of testo 816:
• Automatic range switchover
• Backlit display
• Mains unit connection
• BarGraph display
• AC output to connection from recorders and amplifiers
• DC output with 10 mV/dB to connect recorders or dataloggers

Testo 816 display shows:
• Time weighting            e.g. Fast
• Section measurement range e.g. 50 - 100
• Frequency weighting   e.g. dB(A)
• Current reading            e.g. 57.1    (in large digits)

Dimensions: 309 x 68 x 50 mm,  315 g
Includes microphone, wind protection cap, battery, stereo jack 3.5 mm, in a practical measurement case

Features include:
  Attachable microphone to avoid measuring errors,
  Digital suppression of noise enables accurate measurements at low sound levels,
  Calibration via keyboard
       Brochure on Testo 815 & 816 (.pdf file, 1 page, opens in new tab or window)

Testo 815 & 816
0563 8155   testo 815 sound level meter  $441+GST     1/10
0563 8165   testo 816 sound level meter  $820

Accessories for testo 815 & 816 (data on this item is on the Testo 815 & 816 data sheet)
0554 0452   Sound level calibrator  $641+GST

0554 1084    230V Power supply unit  $138+GST

Certificate for testo 815 / 816
0520 0111 Calibration Certificate, ISO, sound, 94, 104, 114 dB (A) at different frequencies $POA

Light Level Measurement

Testo 545 Light Level

The Testo 545 measures luminous intensities (lux).
The instrument has a mean calculation, memories and location management.

Includes probe, battery and calibration protocol.

In order to have good quality light, luminous intensity in the workplace, hospitals, offices or schools has to fulfill specific minimum guidelines. This can be checked using testo 545.

• Multi-point or timed mean calculation
• Stores up to 99 file locations
• Logger function (3000 readings)
• Quick documentation on site on the optional Testo printer

Meas. range:  0 to +100,000 Lux
Accuracy:     ±1 digit
Accuracy to DIN 5032, Part 6:
     f1 = 8% = V (Lambda) adaptation
     f2 = 5% = cos like rating
Resolution:  1 Lux (0 to +32000 Lux) 10 Lux (0 to +100000 Lux)
PC RS232 interface
Memory 3000
Dimensions:  220 x 68 x 50 mm,    Weight 500 g    See pric below.

   Brochure on Testo 540 & 545 (.pdf file, 1 page, opens in new tab or window)

Testo 540  Light Level

Testo's 540 sensor is adapted to the eye's spectral sensitivity.
testo 540 is therefore ideal for measuring light intensity in the workplace.
Practical and small, it fits all pockets.

• Sensor adapted to spectral sensitivity of the eye
• Hold function and max./min. values
• Display light
• Protective cap for safe storage
• Including wrist strap and belt holder

Meas. range:  0 to 99.999 Lux
Accuracy:     ±1 digit  ±3 Lux (compared to reference)
Resolution:    1 Lux (0 to 19.999 Lux)  10 Lux (remaining range)
Dimensions: 133 x 46 x 25 mm (incl. protective cap)
     Brochure on Testo 540 & 545 (.pdf file, 1 page, opens in new tab or window)

Prices:
0560 0540 Testo 540, Light intensity           $231+GST     1/10
0560 0545 Testo 545  Lux-measuring instr.    $695

Accessories for testo 545
0516 0445   445 Transport Case $203+GST      1/10
0516 0191   Service case $92
0554 0549   Testo Infrared Printer $546
0554 0568   Pack of 6 thermal printer rolls $69
0554 0569   Thermal paper for printer (6 rolls) $63
0554 0610   Recharger incl. 4 NiMH rech. batteries $130
0554 0830   ComSoft 3 (Professional) no interface $653
0409 0178   RS232 cable $119
0554 1711   Ethernet adapter $1,050.00

0520 0010  ISO calibration certificate/light, Calibration points 500; 1000; 2000 Lux

Personal Safety - Gas Safety

Testo 315-1 CO level measuring instrument

By measuring the CO level you can protect yourself from poisoning caused by flue gases escaping into the ambient air.

CO warning and servicing instrument for gas heating systems, with battery and calibration protocol

Testo 315-1 provides you with all the measurement functions needed to service gas heating systems.
While measuring draught, pressure difference or temperature, the instrument can also simultaneously show the CO level in ambient air.  In this way, you always have the system´s safety under your watchful eye.

• Reliable CO warning
• Three alarm thresholds are freely adjustable
• Audible and visual alarm
• Automatic zero point adjustment
• Two temperature sockets to compare flow and return temperature
• Compensation of deviations in readings due to temperature
• TopSafe case protects from dirt, water and impact (optional)
• DVGW approval
• Quick and practical documentation of data on location, printout with date/time and recommended value (alarm threshhold)
• Temperature-compensated
• Zeroing in fresh air is unnecessary
       Brochure on Testo 315-1 (pdf file, opens new tab or window)

0632 0315  testo 315-1  CO detector  $1,458+GST      1/10

Accessories for testo 315
0516 0443 TopSafe case 312/315 $124
0516 0191 Service case $92
0516 3120 Plastic case testo 312/315/316 $179
0554 0549 Testo Infrared Printer $546
0554 0610 Recharger incl. 4 NiMH rech. batteries $130
0554 0568 Pack of 6 thermal printer rolls $69
0554 0569 Thermal paper for printer (6 rolls) $63
0554 0040 Spare particle filters (10off) $73

Probes for testo 315-1
0554 3150 Pressure set with chimney tension probe $138
0628 0020 Velcro pipe wrap probe $146

Testo 315-2  CO warning instrument, with battery and calibration protocol

Use testo 315-2 to check the CO level in ambient air.
Even low concentrations of the highly poisonous gas are detected. In this way, you can judge whether the burner flue gases are being fully drawn off.

• Reliable warning of CO poisoning
• Adjustment of different alarm limits
• DVGW approval
• Printout with date/time and recommended value (alarm limit) (optional)
• With calibration protocol
• TopSafe, protection case for tough applications, protects from dirt, water and impact (optional)
• Quick and practical documentation of data on location,
      optional printout with date/time and recommended value (alarm limit)
• CO zeroing in contaminated room

Meas. Range 0 to +2000 ppm CO
Accuracy ±10% of mv (+100 to +2000 ppm CO)
Resolution 1 ppm CO
Operating temperature +5 to +45 °C
Battery type 9V block battery
Material/Housing ABS
Probe type Electrochemical Probetype
Dimensions 215 x 68 x 47 mm,     Weight 400 g
       Brochure on Testo 315-2 (pdf file, opens in new tab or window)

     0632 0317  testo 315-2  CO monitor:    $947+GST     1/10

Accessories - see above

Testo 316 gas leak detection - flexible probe

Gas pipelines can leak, which means there is the risk of explosion!
The Testo 316 detects even the smallest leaks.  Sensor is built in.

• Flexible measurement probe for hard to reach locations
• Optical and audible alarms signal when limits are exceeded
• TopSafe case protects from dirt and impact (optional)
• DVGW approval

Meas. range 0 to 10,000 ppm CH 4
1st alarm limit from 200 ppm CH 4
2nd alarm limit 10.000 ppm CH 4
Battery life > 5 h
Dimensions 190 x 57 x 42 mm
     Brochure on Testo 316-1 (pdf file, opens in new tab or window)

0632 0316  testo 316-1 gas leak detector $585+GST     1/10
0563 3164  testo 316-4 Set 1    $1,060.00
0563 3165  testo 316-4 Set 2    $1,144.00

Accessories for testo 316-1
0516 0189  TopSafe case   $96.00
0516 3120  Plastic case testo 312/315/316 $164.00

Accessories for testo 316-4
0554 3180  Refrigeration leak sensor $279.00
0554 3181  Ammonia Sensor $365.00

Testo Gas Detector

According to DVGW leaflet G 465-4, gas detectors are approved for above-ground gas detection
up to the "lower explosive limit (LEL)".
Testo's gas detector is a multi-range gas detector for the gas types
methane, propane and hydrogen.
Gas concentrations are measured by the semi-conductor sensor in the ppm range
and are shown in the display with a resolution of 1 ppm.

• Audible signals when approaching the lower explosion limit
• Continuous sound and display when the explosion limit is reached

Display range: Methane CH: 1 to 999 ppm, 0.1 to 4.4 Vol.%
                    Propane C3H8:   1 to 999 ppm, 0.1 to 1.9 Vol.%
                    Hydrogen H2:     1 to 999 ppm, 0.1 to 4.0 Vol.%
Resolution: 1 ppm / 0.1 Vol.%
First reaction: >10 ppm
     Brochure on Testo 316-1 and Testo Gas Detector
           (pdf file, opens in new tab or window)

0632 0323  testo gas detector
Gas detector incl. flexible probe extension, rechargeable battery
and mains unit for mains operation and battery recharging:  $2287+GST      1/10

Testo 317-1  Spillage detector

The testo 317-1 spillage detector efficiently locates escaping heating flue gases.
The practical instrument immediately gives off an optical and acoustic alarm
making a visual inspection unnecessary.
The bendable probe makes it ideal for use at hard-toaccess points.

• Reliable detection of leaking flue gases
• Bendable measurement probe for inaccessible points
• Audible and visual alarm

With flexible probe, incl. battery.

Reaction time:  2 s
Length of probe pipe:  200 mm
Diameter/Probe pipe tip: 10 mm
Dimensions: 128 x 46 x 18 mm        See below for price.
Weight: 300 g
     Brochure on Testo 317-1 and Testo 317-3 (pdf file, opens new tab or window)

Prices:
0632 3170 testo 317-1 flue gas spillage detector $240+GST    1/10
0632 3172 testo 317-2 gas detector $292
0632 3173 testo 317-3 CO-Monitor $398
0632 0323 testo Gas detector       $2,287

Testo 317-2   Gas leak Detector

Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display.

• Shows gas concentration in visual bar display
• Sensor self-test following switch-on
• Audible confirmation of readiness to operate
• Increasing alarm sounds with increasing gas concentration
• Continuous sound if alarm threshold is exceeded
• Battery monitoring with optical display
• Self-test function
• Shows gas concentration in visual bar display

Includes case with belt clip and wrist strap, batteries and calibration protocol

Meas. range:  0 to 20.000 ppm CH4,  0 to 10.000 C3H8
Display: 8 segment trend display
Alarm thresholds: 10,000ppm CH4,  5000ppm C3H8
Lower response thresholds:  100 ppm CH4, 50ppm C3H8
Response: t90 <5 s,    Heat-up time 60 s                              Price: see above.
     Brochure on Testo 317-2 (pdf file, opens new tab or window)

Testo 317-3  CO  Carbon Monoxide meter

The testo 317-3 CO monitor detects the presence of carbon monoxide in the surrounding area
and warns the user both visually and audibly about dangerous gas concentrations e.g. when installing and servicing gas heaters.

   • 3 year warranty on CO cell
   • Visual and audible alarm
   • No zero phase, instrument can be used immediately
   • Adjustable alarm threshold
   • CO zeroing at site
   • Self-test function
Sensor is built in.
CO monitor incl. carrying case with belt clip, headphones, wrist strap, sampler and calibration protocol.

Technical data on Testo 317-3  CO  Carbon Monoxide meter
Measurement range: 0 to +1999 ppm CO
Resolution: 1 ppm
Accuracy:
   ±10 ppm (0 to +99 ppm)
   ±10 % (+100 to +499 ppm)
   ±20 % (>500 ppm)
Response time (t90): 40 s
Ambient temperature: -5 to +45 °C
Supply voltage: 2 batteries Type AAA    Battery life 150 h (with beeper switched off)
Warranty: 2 years on the instrument, 3 years on the CO sensor 
     Brochure on Testo 317-1 and Testo 317-3 (pdf file, opens new tab or window)

0632 3173  testo 317-3 CO-Monitor $398+GST      1/10

Air Quality - CO2

Testo 535 CO2 Measuring

CO2 measuring instrument with permanently attached probe, batteries and calibration protocol
The efficient CO2 measuring instrument for measuring indoor air quality.
Bad air quality in rooms can lead to tiredness, lack of concentration and illness (Sick Building Syndrome) due to high CO2 concentration (greater than 1000 ppm)

• Long-term monitoring based on maximum and mean calculation
• Long-term stable 2 channel infrared sensor
• Highly accurate, highly efficient
• Repeated calibration is unnecessary

Probe type:  2 channel infrared sensor
Meas. range: 0 to +9999 ppm CO2
Accuracy: ±1 digit
     ±(50 ppm CO2 ±2% of mv) (0 to +5000 ppm CO2)
     ±(100 ppm CO2 ±3% of mv) (+5001 to +9999 ppm CO2)
Resolution: 1 ppm CO2
     Brochure on Testo 535 (pdf file, opens new tab or window)

0560 5350  testo 535 CO2 measuring instrument  $955.00

Accessories
0516 0183 TopSafe case $83+GST     1/10
0516 0191 Service case $92
0554 0549 Testo Infrared Printer $531.00
0554 0610 Recharger incl. 4 NiMH rech. batteries $130
0554 0568 Pack of 6 thermal printer rolls $69
0554 0569 Thermal paper for printer (6 rolls) $63
0554 1143 Mains unit, international use, 110/240 V $252

Water Quality - pH - Conductivity & Temperature - Dissolved Oxygen

Testo 205  Robust food penetration pH/°C measuring instrument

Testo 205 instrument set:
   One-hand pH/°C measuring instrument with penetration probe, storage cap, belt/wall holder

A robust food penetration pH/°C measuring instrument with automatic temperature compensation. Probe/sensor is built in.
The robust penetration measuring tip is interchangeable and not affected by dirt and dust thanks to the hole diaphragm.

* Combined penetration tip with temperature probe * Measuring tip can be changed by user * Maintenance-free gel electrolyte * Backlit display * Audible key feedback * 2 line display * Automatic full-scale value recognition * 1, 2 or 3 point calibration possible * pH tip embedded in unbreakable plastic * Combined penetration tip with temperature probe * Measurement tip can be replaced by user * Maintenance-free gel electrolyte * Backlit display

* Audible key feedback * 2 line display * Automatic full-scale value recognition * 1, 2 or 3 point calibration possible         Data on Testo 205 (Testo site, opens new tab or window) Storage temperature -20 to +70 °C Operating temperature 0 to +50 °C Battery type Button cell LR44   Battery life 80 h (Auto Off 10 Min) Dimensions 145 x 38 x 167 mm    Weight 135 g Probe type NTC:  Meas. range 0 to 60 °C (Short-term to +80 °C max. 5 min),   Accuracy ±0.4 °C,   Resolution 0.1 °C Probe type PH electrode:  Meas. Range 0 to 14 pH,   Accuracy (absolute) ±0.02 pH,   Resolution 0.01 pH

Testo 206-pH1   pH/°C measuring instrument for fast checks on liquids

   testo 206-pH1 Instrument set  (Testo site, opens new tab or window)   Probe/sensor is built in.
One-hand pH/°C measuring instrument, pH1 probe head for liquids, storage cap with gel, TopSafe and belt/wall holder

The pH measuring instrument for fast checks on liquids. The combination of pH immersion tip and temperature probe for fast and efficient temperature compensation is unique. The Testo pH probe is leak-proof, maintenance-free, robust and not affected by dirt thanks to the large volume of gel electrolyte and the dual wall diaphragm.

Testo 206-pH2   pH/°C measuring instrument for semi-solid substances

   testo 206 pH2 Instrument set   (Testo site, opens new tab or window)   Probe/sensor is built in.
One-hand pH/°C measuring instrument, pH2 probe head for semi-solid substances, storage cap with gel, TopSafe and belt/wall holder

The pH measuring instrument for spot checks on semi-solid food, e.g. jelly, cream, cheese, fruit... The protection case included “TopSafe” (IP 68) is waterproof, hygienic and dishwasher-safe.

* Can be used for food containing protein
* Combination: pH penetration tip with temperature measurement probe
* Automatic full scale value
* pH2 probe head for semi-solid food
* Leak-proof storage gel
* Used for food containing protein
* Combination: pH penetration tip with temperature measurement probe      Prices - see below
* Automatic full-scale recognition

Testo 206-pH2   pH/°C for all pH probes

   testo 206-pH3   (Testo site, opens new tab or window)
One-hand pH/°C measuring instrument, pH3 probe head with BNC interface, TopSafe and belt/wall holder

Testo 206-pH3 is equipped with a BNC socket which makes it possible to connect all pH probes to the instrument.
The temperature value supplied is automatically analysed if Testo pH probes are used with a built-in temperature sensor.
The temperature can be adjusted manually in probes without a temperature sensor.
Automatic recognition of a stable reading facilitates the measurement process.
The instrument is ideal for outdoor use or use in tough industrial conditions thanks to the "TopSafe" protection case supplied.

* External pH probes can be connected
* Not affected by dirt particles thanks to the TopSafe protective case
* 2 line display
* Automatic full-scale recognition
* 1, 2 or 3 point calibration possible
* All probes on the market can be connected to the BNC adapter
* Testo probes with temperature measurement facilitate temperature compensation

pH Buffer Solution for testo 205 / 206 see above

Testo 230  pH analysis instrument, with 2 electrode clips and battery

combines a complete pH measuring instrument and a high standard thermometer in a compact, waterproof housing.
The redox voltage can also be determined by connecting the redox electrode type 06.

• Easy, user-friendly operation
• pH/°C electrodes are connected via a single plug-in connection
• Robust and splashwater-proof (IP 54)
• Easy-to-read large 2 line display
• Latest probe technology for almost every application
• Displays calibration data and error messages
• pH and temperature measuring instrument in one    Measures pH, mv, and temperature.
     Data on Testo 230 & probes (Testo site)    1/10

LCD, 2 lines
Storage temperature -20 to +70 °C
Operating temperature 0 to +40 °C
Battery type 9V block battery      Battery life 100 h
Dimensions 168 x 72 x 27 mm      Weight 170 g     Material/Housing ABS

Probe type NTC:  Meas. range -50 to +150 °C     Resolution 0.1 °C
Probe type PH electrode:  Meas. Range 0 to +14 pH,  Accuracy (absolute) ±0.01 pH (0 to +14 pH),  Resolution 0.01 pH
Probe type Redox electrode measurement:  Resolution 1 mV,   Overload -1999 to +1999 mV

Testo 240 Conductivity and temperature

Conductivity and temperature measuring instrument with battery and 2 electrode clips

Testo 240 is a complete conductivity measuring instrument and a high standard thermometer combined in one compact, waterproof housing.

* User-friendly operation
* Extremely wide ranges with only one measuring cell
* Robust and splashwater-proof (IP 54)
* Easy-to-read large 2 line display
* No measurement errors caused by dirt particles in the electrodes
* Measures salt (NaCl) level
* Long lifetime of the sensor thanks to 4-electrode technology
* The 4 electrode engineering used here prevents the formation
     of physical coatings, e.g. sewage, which distort the values measured
         Data on Testo 240 (Testo site)     1/10

LCD, 2 lines
Storage temperature -20 to +70 °C
Operating temperature 0 to +40 °C
Battery type 9V block battery,    Battery life 60 h
Dimensions 168 x 72 x 27 mm     Weight 170 g    Material/Housing ABS

Probe type NTC: Meas. range -50 to +150 °C, Resolution 0.1 °C
Probe type Conductive measurement cell:  Meas. Range 0 to +2000 mS/cm

Moisture in Wood or Building Materials

Testo 606-1 & 606-2 Pocket-size professionals
Pocket Line measuring instruments

Testo 606-1:   Material moisture                    Testo 606-1 & Testo 606-2 data
                        0560 6060 testo 606-1, Material moisture $167.00+GST    1/10

Testo 606-2:   Material moisture, RH% & temperature   
                          0560 6062 testo 606-2, Material moisture, air humidity and temperature $325+GST

Testo 616 Moisture in Wood or Building Materials

Wood and material moisture measuring instrument, incl. battery and calibration protocol

The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials.
This allows the ideal time and place for any destructive measurement which may be necessary to be determined.
The display is in percent by weight in comparison to the dry mass of the material.
The testo 616 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces.

• Equipped with 10 characteristics curves for soft wood, hard wood, chipboard,
     anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete,
     vertical hole brick and solid brick
• Measurement depth up to 5 cm
• Handy shape for optimum contact pressure
• Hold, max., min. function
• Illuminated digital display
• Characteristics curves were developed in cooperation with the LPI institut
• Advantageous for measurements on exotic woods: non-destructive determination of wood moisture

   Data sheet on Testo 616 and Testo 606 (.pdf file, opens in new tab or window)

Material characteristics saved
The measuring instrument has built-in material characteristics for: softwood lumber (spruce, larch, cherry, pine, poplar, meranti), hardwood lumber (beech, oak, maple, ash, Douglas-fir, walnut, birch) and chipboard as well as for various building materials.
The material characteristics were determined in cooperation with a renowned building materials institute.

Main applications
testo 616 determines the building moisture before laying tiles, parquet and other floorings.
The measuring instrument is equally suitable as a quick, gentle method of moisture measurement for woods earmarked for production, storage and further processing.

The scatter field probe can be attached to the testo 635 professional humidity measuring instrument with the same functions as the testo 616.
   0560 6160 Testo 616:Wood/material moisture meter :   $761+GST      3/10   

   0516 0210 Zip case List price: $56+GST

   0636 6160 Scatter field probe for testo 635: $667+GST

Testo 606 moisture measuring instrument

The compact Testo 606 moisture measuring instrument with direct humidity display and clear graphics display to measure: moisture in wood & moisture in building materials.
     Testo 606 is now replaced by Testo Pocket Line 606-1 & 606-2

Flue Gas & Combustion Efficiency Analysers  

Combustion Gas

Possible measurable parameters with test instruments (see brochure page 5):
O2    CO               CO low        ogn
NO   NO low          NO2
SO2   H2S      HC    CO2 (NDIR)

Please contact Esis for assistance with purchasing these products, as they are very specialised.

Please contact Esis for assistance with purchasing these products, as they are very specialised.

Testo 335    Flue Gas Analyser

0632 3350   testo 335 Flue Gas Analyser (O2 sensor included) $2,284.00+GST     1/10

A second measuring module must be fitted in testo 335, the instrument will not function otherwise.
Only two additional measuring module can be fitted.         ogn
0440 3988  CO measuring cell $1,462.00+GST     1/10
0440 3936  CO low measuring cell $1,740.00
0440 3935  NO measuring cell $1,544.00
0440 3928  NO low measuring cell $1,740.00
0440 3926  NO2 measuring cell $1,740.00
0440 3927  SO2 measuring cell $1,740.00
0440 3350  Dilution over all measuring cells $340
0440 3351  Pressure / velocity measurement $489
0344 0011  BLUETOOTH module $235

Accessories & Probes for testo 335 - please enquire

Testo 350  Portable exhaust gas analysis system

testo 350 S Control Unit     ogn
0563 0369 Control Unit testo 350 S   $2,720.00+GST     1/10

Options Only for testo 350 S Control Unit
0515 0097 Rechargeable battery pack $241
0554 0569 Thermal paper for printer (6 rolls) $63
0440 0550 Bluetooth wireless connection (option) $235
530563 9998 Bluetooth USB dongle $65

testo 350 XL Control Unit
0563 0353 Control unit testo 350M/XL-454 $3,641.00

Options Only for testo 350 XL Control Unit
0440 0559 Touch screen with pencil $501.00
0554 0569 Thermal paper for printer (6 rolls) $63
0515 0097 Rechargeable battery pack $241
0554 1084 230V power supply unit $138

testo 350 S Analysis Box
0563 0368 Measuring box testo 350 S $2,471.00
0440 0550 Bluetooth wireless connection (option) $235
530563 9998 Bluetooth USB dongle $65

A second measurement module must be installed in testo 350 S, otherwise the instrument is unable to function.
Up to 5 additional measurement modules can be fitted

Options, Accessories, etc, for Testo 350 - please enquire

Testo 319     Endoscope

Fibrescopes
0632 3191  testo 319-1 Fibrescope        $1,170+GST    1/10
0563 3191  testo 319-1 Fibrescope Set  $1,687

Accessories for testo 319
0554 3196  Flexible gooseneck tube testo 319   $230+GST     1/10
0554 3194  Mirror top 45° testo 319   $116
0516 3192  Carrying case testo 319    $116

Testo 360  - not in 2010 price list

Testo 312-2/-3   Pressure measurement for service and adjustment work
                          Jump to Pressure Instruments (different page, opens in new tab or window)

testo 300 analyser    Professional flue gas analyser
testo 300M            Compact Flue Gas Analyser - Discontinued (use Testo 330 & 335)
testo 300M-1            Compact Flue Gas Analyser - Discontinued (use Testo 330 & 335)
testo 300L           Compact Flue Gas Analyser - Discontinued (use Testo 330 & 335)
testo 300XL          Compact Flue Gas Analyser - Discontinued (use Testo 330 & 335)
testo 300XL-1          Compact Flue Gas Analyser - Discontinued (use Testo 330 & 335)
testo 300XXL analyser    Multi-function flue gas analyser

testo 325-2 analyser         Compact Flue Gas Analyser
testo 325-3 analyser         Compact Flue Gas Analyser
testo 325-I analyser          Low cost analyser for industry ~ SO2 Set
testo 325M                 Professional flue gas analyser
testo 325XL               Professional flue gas analyser

testo 330                Flue Gas Measurement
testo 330                  Readout Adapter for Burner Controller - new
testo 335                Flue Gas Analyser with O2 sensor
testo 350     Analyser       Flexible flue gas measuring system
testo 350-S Flue Gas Analyser
testo 360 analyser       Multi-function analyser for industry

Stack Emissions Analysers

Testo 300, Testo 325I Flue Gas Analysis | Testo 350 Flue gas analyser for burners >500kW power
Testo 360 Robust portable emission measuring - see above

O2, SOx, NOx, CO, CO2, CxHy, gas flow, moisture level, flue gas temperature - please enquire

Testo is the largest and most experienced manufacturer of electronic combustion analysers in the world. Thanks to Testo analysers, thousands of boilers and systems have been accurately and efficiently tuned. This experience works to your advantage. Higher quality and reliability is evident in better warranties and easier instrument operation and greater value in combustion efficiency analysis.

Testo 54 Series - Process displays/external displays

   Data on Testo 54 Series, etc  (.pdf, 60 pages)