Information about 4-20mA Current Loops
This page Wind & Weather Stations - incl. ice free - Vaisala
The
Vaisala WINDCAP® Ultrasonic Wind Sensor WS425 F/G is a premium, ice-free
sensor for measuring surface wind speed and direction.
The sensor has no moving parts and it is resistant to contamination,
salt, dust, and corrosion. Thus, the WS425 F/G requires no on-demand or periodic
maintenance. The sensor has a heating feature with a total heating power of
150 W.
Wind speed can be measured up to 165 knots with the sensor.
The WS425 F/G uses ultrasound to determine horizontal wind speed and direction.
The measurement is based on transit time, the time it takes for the ultrasound
to travel from one transducer to another.
The transit time is measured in both directions for each pair of the transducer
heads. The wind measurements are calculated in a way that completely elimates
the effects of altitude, temperature, and humidity.
The WS425 F/G is especially suitable for use in harsh, arctic or antarctic conditions.
The United States National Weather Service has chosen to replace the mechanical
sensors used in the Automated Surface Observing System with the WS425 F/G.
Full
Data on WS425 F/G
WS425 F/G
A premium ice-free sensor for most demanding weather conditions
with an enhanced 150 W heating to ensure ice-free operation and a measurement
range of 165 knots.
Prices: please enquire. See contact details at the top of this page.
WS425 A: Stainless Steel $4469+GST
4/09
WS425 B: Stainless Steel Heated $5363+GST 4/09
*Mating connector not supplied ( see below )
WAS425CON Connector only ( no cable ) WS425 $90+GST
4/09
ZZ45204 Connector and Cable Supporting analog outputs, 10m $202
ZZ45203 Connector and Cable supporting RS-232 outputs, 10m $202
010411 Connector and Cable supporting RS-485/RS422 outputs, 10m $202
WS425CABSDI Connector and Cable supporting SDI-12 outputs, 10m $202
Mounting Adapter
WS425FIX30 Adapter for 30 - 35 mm ( 1 1/4 inch ) diameter vertical tube $170
WS425FIX60 Adapter for 60 mm diameter vertical tube $170
WS425VERIFIER Verifier WS425 $1075+GST 4/09
WS425
Provides the most accurate and maintenance free wind measurements for demanding
applications.
Ideal for replacing mechanical sensors.
WMT52 WINDCAP®
Ultrasonic Wind Sensor Measures horizontal wind speed and wind direction
Triangular design ensures excellent data availability
No moving parts - Maintenance-free
Optional heating available
Compact, durable and robust
Low power consumption
IP66 housing with mounting kit
Applications: marine, wind energy, environmental monitoring
Full
Data on WMT52 Ordering
options & codes
WMT52 WMT52 Ultrasonic Wind Sensor $2128+GST 4/09
HEATING Heating for wind measurement
WX8-PINCONNECTOR 8-pin M12 male connector & bushing + grounding accessories
WX2MCABLESH Shielded 2m 8-pin M12 cable, requires WX8-PINCONNECTOR
WX10MCABLESH Shielded 10m 8-pinM12 cable, requires WX8-PINCONNECTOR
WX40MCABLESH Shielded 40m long 8-pin cable, open end wires
WMUSBRS232 USB/RS232 1.4m USB cable, requires WX8-PINCONNECTOR
WMUSBRS485 USB/RS485 1.4m USB cable, requires WX8-PINCONNECTOR
WX10MEXTCABLESH Shielded 10m extension cable with connectors both ends.
SERVICEPACK2 Configuration software and USB cable
WXMOUNTKIT Mounting kit - allows easy removal of sensor without re-alignment
when re-installing. Increases IP65 to IP66.
WXBIRDKIT Bird spike
MOUNTING&BIRDKIT Mounting kit and Bird spike set
220614 Configuration software and USB service cable - Spare part
222287 Shielded 2m 8-pin M12 cable - Spare part
222288 Shielded cable 10 m 8-pin M12 Spare Part
217020 Shielded 40m 14-pin cable, open end wires - Spare part
215952 Shielded cable 10 m 8-pin M12, connectors on both ends, SP
WMTBOTTOMSP WMT52 Bottom, including BIF and M12 connector - Spare Part
WMS30KIT Mounting adapter for tube diameters 50 -110 mm
222109 Bushing & grounding Accessory Kit - Spare part
212792 Mounting kit - Spare part
212793 Bird kit - Spare part
220782 USB RS-232/485, 1.4 meters USB / M12 cable - Spare part
WSP150 Vaisala Surge Protector for WXT520, WMT52, WM30, WS425,
WMT50 Ultrasonic Wind Sensor - Replace by WMT52
above
Combined Wind Sensor
WMS301 B: Combined wind sensor WMS301 with 1-wiper potentiometer $1,560
WMS302 C: Combined wind sensor WMS302 with 2-wiper potentiometer $1,560
WMS30KIT Mounting adapter WM30KIT for tube diameters 50 - 110 mm $210
Standard Wind
WAA151 Wind Speed Sensor $880
*Mating connector not supplied ( see below )
WAV151 Wind Direction Sensor $960
*Mating connector not supplied ( see below )
Standard Wind Sensors, Heated
WAA252 Wind Speed Sensor $2,580
*Mating connector not supplied ( see below )
WAV252 Wind Direction Sensor $2,730
*Mating connector not supplied ( see below )
WMS301 Combined wind sensor WMS301 with 1-wiper potentiometer
Supplied with adapter for mounting on 30mm tube
$1468+GST 4/09
WMS302 Combined wind sensor WMS302 with 2-wiper potentiometer
Supplied with adapter for mounting on 30mm tube
$1511+GST 4/09
WMS30KIT Mounting adapter WM30KIT for tube diameters 50 - 110 mm
19370 Connector, WMS301, WMS302, WMS302M
19904 Cable, Sensor M12 5N-Female 10m Shielded
WA35234 Vane Assembly for WMS301 & WMS302
WA45233 Cup Wheel assembly for WMS301 & WMS302
WA45232 Anemometer bearings assembly for WMS301 & WMS302
25160WA Set of Vane Bearings for WMS301 & WMS302
WAA151 Wind Speed Sensor $1064+GST
4/09
*Mating connector not supplied ( see below )
WAV151 Wind Direction Sensor $1149+GST
*Mating connector not supplied ( see below )
WAA252 Wind Speed Sensor $2915+GST
4/09
*Mating connector not supplied ( see below )
WAV252 Wind Direction Sensor 3075+GST
*Mating connector not supplied ( see below )
WAC151 Crossarm for wind sensors ( with thermostat ) and mating
WAT12 Wind Transmitter, Analog ( with cross arm & thermostat ) and
WAC155 Wind Transmitter, RS485 ( with cross arm & heating control ) and
WSP150 Vaisala Surge Protector for WXT520, WMT52, WM30, WS425,
WA15/25+WAC151/WAT12/WAC155
1394 Mating Connector, WAA151, WAA252
1395 Mating Connector, WAV151, WAV252
WHP151 Outdoor Mains Power Supply
WHP25 Outdoor Mains Power Supply for heated sensors
ZZ45048 Outdoor signal cable for WA-sensors, 10 metres
ZZ45049 Outdoor Heating Power Cable, 10 metres
WXT520
Upgraded Vaisala Weather Transmitter WXT520 Access to Real Time Weather Data. (Looks similar to WXT510 above.)
Dimensions: Height: 240mm + 32mm for mounting base; Diameter: 120mm.
Measures 6 most essential weather parameters
WSD (Wind Speed & Direction), RH (Rel. Humidity), Temperature,
Pressure, Rainfall
Accurate and stable
Low power consumption - works also with solar panels
Compact, light-weight - Easy to install - No moving parts
Vaisala Confguration Tool software for PC
USB connection
IP66 housing with mounting kit
Applications: weather stations, dense networks, harbors, marinas
Measure rainfall precipitation with the WXT520.
The measurement is based on the unique Vaisala RAINCAP® Sensor, which detects
the impact of individual rain drops.
The signals exerting from the impacts are proportional to the volume of the
drops.
Hence, the signal from each drop can be converted directly to the accumulated
rainfall.
The Vaisala RAINCAP® Sensor is the only maintenance-free precipitation sensor
on the market.
Full
data on WXT520 WXT520
Ordering Options & Codes (Comms, heating, cable, mounting, SW, Manual)
WXT520 Weather Transmitter.
Measures Wind Speed, Wind Direction, Barometric Pressure, Relative Humidity,
Air Temperature and Rainfall $3586+GST
4/09
HEATING Heating for wind and rain measurements
WX8-PINCONNECTOR 8-pin M12 male connector and bushing & grounding accessories
WX2MCABLESH Shielded 2m 8-pin M12 cable, requires WX8-PINCONNECTOR
WX10MCABLESH Shielded 10m 8-pinM12 cable, requires WX8-PINCONNECTOR
WX40MCABLESH Shielded 40m long 8-pin cable, open end wires
WMUSBRS232 USB/RS232 1.4m USB cable, requires WX8-PINCONNECTOR
WMUSBRS485 USB/RS485 1.4m USB cable, requires WX8-PINCONNECTOR
WX10MEXTCABLESH Shielded 10m extension cable with connectors both ends.
SERVICEPACK2 Configuration software and USB cable
WXMOUNTKIT Mounting kit - allows easy removal of sensor without re-alignment
when re-installing. Increases IP65 to IP66.
WXBIRDKIT Bird spike
MOUNTING&BIRDKIT Mounting kit and Bird spike set
220614 Configuration software and USB service cable - Spare part
222287 Shielded 2m 8-pin M12 cable - Spare part
222288 Shielded cable 10 m 8-pin M12 Spare Part
217020 Shielded 40m 14-pin cable, open end wires - Spare part
215952 Shielded cable 10 m 8-pin M12, connectors on both ends, SP
WXTBOTTOMSP WXT520 Bottom, including BIF and M12 connector - Spare Part
WMS30KIT Mounting adapter for tube diameters 50 -110 mm
222109 Bushing & grounding Accessory Kit - Spare part
212792 Mounting kit - Spare part
212793 Bird kit - Spare part
218817SP WXT520 Radiation shield set - Spare part
220782 USB RS-232/485, 1.4 meters USB / M12 cable - Spare part
WSP150 Vaisala Surge Protector for WXT520, WMT52, WM30, WS425,
WA15/25 + WAC151/WAT12/WAC155
Measures Wind Speed, Wind Direction,
Barometric
Pressure, Relative Humidity, Air Temperature and Rainfall
Superceded by WXT520 above
Vaisala provides a variety of products ranging from individual instruments,
for integration into a system, through full systems to comprehensive solutions.
You can see the range of products that are available for integration at: www.vaisala.com/integrators
13303 Multi-plate (louvred), 21cm high, 12cm dia,
with one probe mounting gland.
Bracket & U-bolt for mounting on vertical pipe 25-50mm dia.
for HMP45A, or HMD60Y $495
The
Vaisala Meteorological Installation Kit HMT330MIK enables the Vaisala HUMICAP®
Humidity and
Temperature Transmitter HMT337 to be installed outdoors to obtain reliable measurements
for meteorological purposes.
• For outdoor humidity and temperature measurements
• Can be ordered in a variety of configurations
• Used together with HMT337 transmitter or PTU307
• Vaisala SPH 10/20 Static Pressure Head eliminates effectively pressure
variations in the barometer caused by wind
HMT337 / PTU307 Features
• Warmed probe provides true humidity readings in condensing conditions
• Humidity measurement expressed as relative humidity and/or dewpoint temperature
• Easy feld calibration with the HM70 hand-held meter
For details jump to other Vaisala Page (opens new tab or window)