Logtag Data Loggers, Temperature & Humidity Recorders

LogTag with displayThe Logtag is one of the most cost effective, high performance small sized temperature data loggers available in today's market. 

Very easy to measure temperature, & optionally humidity: Configure the logger with the user-friendly software, and press the LogTag's Start button to start recording.

The LED indicators or LCD display show whether the temperature has gone outside your predefined temperature range.

Pick the LogTag model which suits - Wide Temperature Ranges, down to -80º or up to +99ºC - and Internal or External Sensors. Perfect for transportation, storage areas, fridges, ultra freezers, measuring inside food, etc.

On this page:

Prices do not include GST and may change without notice.


Logtag Data Loggers - Selection Table, and Software

Temperature only models:
    LOG, LOGEXT, LOGDISP, LOGDISPEX, LOGDRYICE, LOGDIEXT

Humidity & Temperature model: LOGHUM

Logtags provide the convenience of alarm indicators or displays and the option for external probes. Features include:

  • Alarm LED or temperature display
  • Tough ABS housing
  • Larger log capacity
  • Credit card sized

 Choose your model from this table, and scroll down to see full details of each model.

LogTag Selection Table 2014-07

Note 1: The LOGDRYICE battery life is 1 to 2 years, but is restricted to 1,000 readings at extremely low temperatures. This is due to the battery being exposed to incredibly low temperatures.
The LOGDIEXT does not have this limitation because the logger is not exposed to the colder temperatures.

     LogTag General Quick Start Guide (pdf file, opens in new tab)

 

Also required:

Reader & Software Kit

LTKIT:  (LTI-USB) The software kit contains the software, reader and case required for a PC to communicate with the Logtags.
At least one reader is required per customer.
The software can be freely copied onto multiple computers. The software will download results, display them and save them for later recall.

  • LTKIT (LTI-USB) LogTag Software and USB Reader Kit: $139+GST

Logtag Reader and Software details

The reader is by far the fastest in its class.
Interface cradles are available in USB or legacy RS232 connection versions.
Designed for high levels of use, the LogTag Interface cradle can sustain many 10000's of insert cycles and gold plated contact design resists the effects of dirt and moisture.

    Automatic download of results when LogTag Logger is connected
    Configuration of LogTag Logger, including batch configuration
    Display results in multiple chart formats
    Reports and summaries
    Store results on computer for later use
    Automatic emailing and upload of results

Storage Temperature Range:     -40°C ~ +70°C
Operating Temperature Range:  -20°C ~ +60°C
USB2.0 standard (LTI/USB only)

Cable length:      1.5m (4' 11")
Environmental:    IP50 (rated for inside use only)
Power source:      Powered from computer
Size:            46mm(H)x103mm(W)x84mm(D) not including cable
Weight:       142grams
Case Material:    ABS
 
 
LogTag Analyser™ software provides a powerful user-friendly platform for configuring LogTag before deployment and for data analysis when LogTag is retrieved.
LogTag software can support multiple interface cradles thereby reducing the processing time of multiple LogTag download or configuring.
USB drivers are Microsoft WHQL digitally signed and available for download from Windows Update
LogTag Analyser™ is available free for download: LogTag software download

Kits include reader (USB), software, and instructions.

 

Temperature Data Loggers without displays: LOG, LOGEXT

LogTag logger without display - temperature

LOG Temperature Data Logger

    Measure and record ambient temperature using the internal sensor
    Stores up to 16,159 temperature readings onto internal memory
    -40°C to 85°C measurement range with ±0.5°C accuracy
    Up to 3 year battery life at 15 minute sampling interval
    Requires USB Docking Station (#LTI-USB). Software Available for Download
                  Data on TRIX-16  (pdf file, opens in new tab)

  • LOG (TRIX-16) Temperature Data Logger, larger memory: $70+GST
    Also required: Software & Reader, see above          Qty. discounts available


         General Quick Start Guide  (pdf file, 2 pages, opens in new tab)

TREX-8 side view temperature loggerLOGEXT Temperature Logger with External probe

    Inexpensive, easy to use temperature logger
    Real time clock records time and temperature
    Ideal for cold chain applications
    Alert and OK Indicators
    Requires a LogTag ST100 External Temperature Sensor, USB Docking Station (#LTI-USB).
    Software Available for Download.
                   Data on TREX-8   (pdf file, opens in new tab)

  • LOGEXT (TREX-8) Temperature Logger with External probe: $160+GST
    Also required: Software & Reader, see above                      Qty discounts available

    Includes ST100T-15 External Probe with 1.5m cable (4'11”) with no handle 

    ST100T140mm probe length, diameter 5mm, cable length 1.5m 
    This long tipped probe incorporates a 140mm exposed length of 5mm diameter 316 stainless probe.
    All materials at probe end of cable are FDA food rated including the cable.
    Alternative probe models are available - see probe list below.

        General Quick Start Guide  (pdf file, 2 pages, opens in new tab)
 

 

 

Temperature Data Loggers with displays: LOGDISP, LOGDISPEX

LogTag with LCD Display - temperature loggerLOGDISP Temperature Logger with 30 day summary display

    Ambient Temperature Recordings with -30°C to 60°C Range
    LCD Display Shows Current, 30 Day Summary and Statistical Temp Readings
    1 Year Battery Life with User-Replaceable Battery
    Stores up to 7,770 Temperature Samples
    Visual Alarms, Push-Button Start and FDA 21 CFR Part 11 Digital Signatures
    Requires USB Docking Station (#LTI-USB). Software Available for Download
    30 day summary display

  • LOGDISP (TRID30-7R) Temperature Logger with Display, Internal Sensor: $160+GST
    Also required: Software & Reader, see above                    Qty. discounts available

            Brochure on LOGDISP (TRID30-7) (pdf file, 2 pages, opens in new tab)
            Specs on LOGDISP (TRID30-7)      (pdf file, 20 pages, opens in new tab)
            Startup Guide for LOGDISP & LOGDISPEX  (pdf file, opens in new tab)
 

LOGDISPEX  Temperature Logger, 30 day summary display
                                                                           & external probe

The LogTag® LOGDISPEX (TRED30-7) Temperature Recorder measures and stores up to 7770 temperature readings
over -40°C to +99°C (-40°F to +210°F) measurement range from a remote temperature probe

    Ambient temperature recordings with -40°C to 99°C range using external probe
    LCD Display shows current, 30 day summary and statistical temperature readings
    1 year battery life with user-Replaceable Battery
    Stores up to 7,770 temperature samples
    Visual Alarms, Push-Button Start and FDA 21 CFR Part 11 Digital Signatures
    Requires USB Docking Station (#LTI-USB).    Software Available for Download
    30 day summary display

  • LOGDISPEX  (TRED30-7) Temperature Logger with Display, with external probe: $195+GST      10/17
    Includes probe ST100T-15                                                          Qty. discounts available
    Also required: Software & Reader, see above 

              Data on LOGDISPEX (TRED30-7)  (pdf file, 2 pages, opens in new tab)
              Specs. for LOGDISPEX (TRED30-7) (pdf file, 22 pages, opens in new tab)
              Startup Guide for LOGDISP & LOGDISPEX (pdf file, 2 pages, opens in new tab)

Accepts all LogTag® ST100 type remote temperature probes.

ST100 External ProbesProbes    

Interchangeable to rated product accuracy with
LogTag LOGEXT, LOGDISPEX
    
High Quality gold plated connector
Industrial strength PTFE coaxial cable

ST100S-xx  30mm tip length, ⌀5mm (upper picture above)
This short tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
All materials at probe end of cable are FDA food rated including the cable.

  • ST100S-15  with 1.5m (4'11”) cable or
  • ST100S-30 with 3m (9'10") cable

ST100T-xx    140mm   tip length, ⌀5mm (middle picture above)
This long tipped probe incorporates a 140mm exposed length of 5mm diameter 316 stainless probe.
All materials at probe end of cable are FDA food rated including the cable.

  • ST100T-15  with 1.5m cable (4'11”) with no handle - supplied as standard with ..EXT loggers.
  • ST100T-30 with 3m (9'10") cable

ST100H-xx   105mm tip length, ⌀5mm with handle (lower picture above)
The handled probe incorporates a 70mm long shaped overmolded handle with a 105mm length 5mm diameter (slightly greater than 3/16”) 316 stainless probe. All materials at probe end of cable are FDA food rated including the cable. Terminated with an MCX plug.

  • ST100H-15 with 1.5m (4’11”) cable,  or 
  • ST100H-15 with 3.0m (9’10”) cable

ST100J probeST100J-xx   40mm tip length, ⌀3.2mm
This short tipped probe incorporates ~40mm of exposed length of 3.2mm diameter 316 stainless probe.
All materials at probe end of cable are FDA food rated including the cable. Terminated to MCX plug.

  • ST100J-15  with 1.5m (4'11”) cable, or
  • ST100J-30 with 3m (9'10") cable
     

ST100B Untipped probe

ST100B-xx   Untipped (bare sensor)
Bare sensor without stainless sheath ready for fitting to custom probe assembly.
Not rated for food contact or environmentally rated. Terminated to MCX plug.

  • ST100B-15 with 1.5m (4’11”) cable, or
  • ST100B-30 with 3.0m (9’10”) cable

    External Probe details   (mfr site, opens in new tab)
includes ST100J,  ST100K,  ST100L,  ST100S,  ST100T,  ST100H,  ST100B 

Other LogTag models not stocked in Australia (MOQ applies, lead time approx 2 weeks)

TRID30-7F is the same as LOGDISP but has a fixed battery that cannot be replaced. 

TRID30-7FW   Vaccine Refrigerator Temperature Logger with 30 day summary display,
   compliant to WHO PQS specification E006/TR06.3.

 

Humidity & Temperature Data Logger: LOGHUM

Haxo-8 LogTag Humidity LoggerLOGHUM  Humidity & Temperature Recorder

The LogTag® LOGHUM (HAXO-8) Humidity & Temperature Recorder combines the leading edge features of the LogTag temperature Recorder with a highly reliable solid state humidity sensor means the LogTag LOGHUM is a leader in it's class.

    Records Temperature and Humidity Readings
    Measurement Range: -40°C to 85°C @ 0 to 100% RH
    Up to 3 Years of Battery Life and Hibernate Mode for Extends Battery Life
    Alarms and LED Status Indicators
    Requires USB Docking Station (#LTI-USB). Software Available for Download

  • LOGHUM (HAXO-8)  Humidity & Temperature Logger: $165+GST                    10/17
    Also required: Software & Reader, see above                Qty. discounts available

               Brochure & Specs. on LOGHUM (HAXO-8) (pdf file, 3 pages, opens in new tab)
               Quick Start Guide for LOGHUM (HAXO-8)  (pdf file, 1 page, opens in new tab)

               Air Filter for LOGHUM (HAXO-8) (pdf file, 1 page, opens in new tab)

 

 

Low Temperature Data Loggers LOGDRYICE, LOGDIEXT, Freeze Indicator

TRIL-8LOGDRYICE   Dry Ice “Probe-less” Temperature Recorder

The LogTag® Dry Ice “Probe-less” Temperature Recorders operate, measure and store up to 8000 temperature readings in environments ranging from -80°C to +40°C (-112°F to +104°F).

Intended for use in transit monitoring of articles stored in packaging incorporating dry ice cooling agents and similar low temperature applications.

    Measures and records temperature from -80°C to 40°C using internal sensor
    Ideal for transit monitoring with dry ice
    Non-replaceable Lithium battery with limited number of uses
    1000 hour battery life at -80°C
    Stores up yo 8,000 samples/readings
    Customizable alarm settings
    Requires LogTag Analyzer Software for Windows PC and Docking Station
                  Brochure on LOGDRYICE (TRIL-8)           (pdf file, 2 pages, opens in new tab)
                  General Quick Start Guide  (pdf file, 2 pages, opens in new tab)

  • LOGDRYICE (TRIL-8) Multi-use Low Temp Logger: rated for up to 1000 hours of exposure to -80°C:   $199+GST
    Also required: Software & Reader, see above                                                            Qty. discounts available

Note: Prior to December 2011 the TRIL-8 battery specification and management system limited the product to a total of 3 trips.
TRIL-8 product shipped from the factory from December 2011 supports an enhanced battery management system that rates the product multiuse for an accumulative exposure of up to 1000 hours @ -80°C.
Newer TRIL-8 product will require the LogTag Analyzer, software version 2.2r20 or later.
 

LOGDIEXT     Low Temperature Data Logger - external probe

The LogTag® low temperature remote probe temperature recorder measures and stores temperatures from -80 °C to +40 (-112°F to +104°F) with an ST10 temperature probe.

    Measures and Records Temperature Readings Ranging from -80°C to 40°C
          using External Sensor (sold separately)
    Ideal for Transit Monitoring With Dry Ice
    Non-Replaceable Lithium Battery with Up to 3 Year Battery Life
    Stores Up To 8,000 Samples/Readings
    Low Battery Indication in Software
    Customizable Alarm Settings
    Requires ST10 Type Temperature Probe, USB Docking Station (#LTI-USB).
    Software Available for Download

  • LOGDIEXT (TREL-8) Low Temperature Data Logger with external probe: $229+GST
    Also required: Software & Reader, see above                                          Qty. discounts available

                Brochure on LOGDIEXT (TREL-8)  (pdf file, 2 pages, opens in new tab)
                Specs. on LOGDIEXT (TREL-8)    (pdf file, 4 pages, opens in new tab)

Includes ST100T-15 External Probe with 1.5m cable (4'11”) with no handle 

    ST100T Probe140mm probe length, diameter 5mm, cable length 1.5m 
    This long tipped probe incorporates a 140mm exposed length of 5mm diameter 316 stainless probe.
    All materials at probe end of cable are FDA food rated including the cable.
    Alternative probe models are available - see probe list above

Other LogTag models not stocked in Australia (MOQ applies, lead time approx 2 weeks)

SRIL-8 Single use Dry Ice Logger: Similar to LOGDRYICE but lower cost for single use

TICT iS0°TagTICT iS0°Tag   Freeze Indicator and Temperature Logger: 

A temp logger with a tamper-proof, irreversible electronic indicator which shows if the temperature has been at or below freezing point (0°C ) for 60 minutes.

 
 

Optional Accessories for LogTag Loggers

Wall Mount BracketOptional Wall mount

Provides an easy and tidy solution to mount a LogTag on a wall, door or vertical surface while still allowing easy removal of the LogTag for data downloading.
The Wall Mount Bracket can be used inside coolstores, refrigerators, freezers, shipping containers and many other applications.
This Bracket accepts all current LogTag recorder products
        Data on Wallmount Bracket   (pdf file, opens in new tab)

  • LOGWALL (200-000010) LogTag Wall Mount Bracket: $10+GST
 

Protective Enclosure for LogTag loggerOptional Protective Case

The protective case allows the use of Logtags in harsh environments.
It is made of high inpact polycarbonate and has a  rating of  IP67.
Compatible with TRID30-7x, TRIX-8 /16, SRIC-4, TRIL-8 / SRIL-8
         Data on LogTag Protective Enclosure (pdf file, opens in new tab)
         Protective_Enclosure_Instructions      (pdf file, opens in new tab)

  • LOGPROT (200-00020) Protective Enclosure: $20+GST  
 

Calibration

Measurement equipment such as LogTag loggers are recommended to be calibrated regularly at 1-2 year intervals (depending on usage and accuracy/traceability requirements). 

Please contact us for calibration pricing. We can provide fully NATA Accredited Calibration certificates, or lower cost Traceable Calibration certificates.

 

Computer Products

Communication Products

Measurement Products

Lab Products

 

Contact us for more info:

Phone: +61 2 9481 7420

Email: (JavaScript required)