Monitor Arms & Mounts
Mounting Arms for
LCD Screens or Monitors
On this page... jump down to
Monitor Arms - Swing Arms & Articulated Arms
- Desk Mounts - Spacedec Acrobat & Display, Visidec, & POS Ranges
- Wall Mounts - Spacedec & Visidec Focus
- Ceiling Mount - close to ceiling, or hanging on pole
- Freestanding - for 2 or 4 monitors - Visidec
For Notebooks
- Notebook Accessory, Focus for pole
- Notebook Stand for desk
Prices do not include GST and may change without notice.
Other related pages:
Ergotron Range of mounting devices, arms, carts and trolleys for screens & computers, many types: includes new Combo Notebook and Screen stand
Ergotron Desk mounts Wall Mounts Carts and mobile platforms for screens & computers
Telehook - Wall & ceiling mounts for large screens - also projector ceiling mounts
Wall & ceiling mounts for large flat screens & projectors: jump to the Telehook page
and many more
For many large screen, plasma TV, ceiling & projector mounts: jump to theTelehook page
Desk mounts
- Desk Mounts - Levitate - Full Motion with extended reach & Dynamic Lift Assistance
Desk mounts using poles (short or tall)
- Desk Mounts - Spacedec - Raise or lower with arm
- Desk Mounts - Visidec - Raise or lower by moving on pole
- Desk Mounts - Display POS Range
- Desk Mounts - Donut mounts which clamp onto pole
VESA Mount Compliance Explained (click to view)
The Video & Electronics Standards Association of USA (VESA) has issued suggested standards for the attachment mounting systems for electronic visual displays. This is how the mount attaches to the display itself.
Whilst these standards are quite detailed the basic details of the standards involve the size of the display and the relevant spacing and sizing of the hole to mount the display.
Screen Size
12 inch to 23 inch Displays (305mm to 583mm)
Hole pattern: 4 holes M4 screw thread
75mm x 75mm (3"x3" approx.) or
100mm x 100mm (4"x4" approx.)
23 inch to 30.9 inch (584mm to 787mm)
Hole Pattern: 6 holes M4 screw thread
100mm x 200mm (4" x 8" approx.)
31 inch to 90 inch (787mm to 2286mm)
Hole Pattern: increments of 8 inches (200mm)
Up to 50 kg M6 screw thread Over 50 kg M8 screw thread
If you require additional details please refer to: http://www.vesa.org/
Any user should use their own investigations to ensure that any panel they decide upon complies with these standards.
Desk Mount Monitor Arms
Levitate Series
L-PB / L-PW Desk Mount, Single Screen
Full Motion with extended reach & Dynamic Lift Assistance
The Levitate monitor arm is a breakthrough in mounting technology. Its advanced
design with spring assisted balance provides a unique level of operational flexibility.
Designed to suit the latest computer technology, it features integrated cable
management, adjustable display orientation and touch-screen support.
Supplied
with an easy to follow installation guide and all necessary mounting hardware, the
Levitate can be set up in minutes.
Available in White and Black with an optional Mac
version, the superior functionality and finish of the Levitate will enhance
productivity and presentation in virtually any home, office, or commercial situation.
Compatible with 12" or larger monitors
from 2 to 9 kg (4.4-19.8lbs)
Compatible with monitors which have a standard VESA mounting pattern*
Detachable display head allows easy monitor installation and fast replacement
(security screw prevents unauthorized removal)
Allows +10/-90° tilt , +/-90° pan and landscape / portrait orientation adjustment
Provides 360° upper arm and 360° lower arm rotation (optional 180° range
limiting on the lower arm
allows operation in compact installation environments)
Provides a minimal profile when retracted & extends to reach 525mm (20.67") with
Dynamic Lift Assistance™ for easy manipulation
Allows a maximum screen height of 565mm (22.24") for operation by a standing user
Features integrated cable management for reduced congestion and clutter
Features a stainless steel and aluminium construction for superior strength and durability
Supplied with bolt through and clamp attachments for desks up to 50mm (2") thick**
Supplied with display mounting hardware and an
easy installation guide
Available in White and Black with an optional Mac version
Visual gauges on tension settings
enable rapid multi-product installation
Data sheet on L-PB, L-PW (pdf file, opens in new tab)
L-PB / L-PW Desk Mount, Single Screen,
Full Motion with extended reach
& Dynamic Lift Assistance $330+GST 12/11
Related Products:
LM-PW Mac display desk mount (White)
LD-PB/PW Dual display desk mount (Black / White)
LH-PB/PWW High weight desk mount (Black/White)
LMH-PW Mac high weight desk mount (White)
LW-PB/PWW Wall mount (Black / White)
LWM-PW Mac wall mount (White)
LHDC-B/WD Heavy Duty 2.5" Desk Clamp (Blk/ White)
AC-AP-2010 200x100mm VESA Adaptor Accessory
Spacedec - Acrobat Swing and Articulated Arms
Click on a picture to jump down to the details
Desk Mounting Options (click to view)
Desk Clamp - suits work surfaces up to 38mm thick
Bolt Through - suits work surfaces up to 40mm thick
Green Star compliancy applies to Spacedec Acrobat extra long arms:
Swing Arm, Swing Arm Double, Swing Arm Wall & Slat Wall, Articulated Arm, Articulated Arm Wall
Atdec Green Star (click to view)
Earn Green Star points with Atdec products, add value to your projects.
IEQ-4 "Daylight Glare Control", Green Star Office Interiors v1.1 Technical Manual:
"1 point is awarded where all workstation monitors provided as part of the tenancy fitout are flat-screen and are mounted on an adjustable arm that enables the monitor to be pivoted and adjusted horizontally and vertically. Adjustable arms must have at least two articulations and be able to provide the monitor with a vertical and horizontal displacement of at least 50cm.
The adjustable arm must allow the monitor to be pivoted vertically and horizontally, and should provide the user with the capacity to orient the monitor perpendicular to the two nearest facades"
What is Green Star? (Green Star site, opens in new tab or window)
Spacedec Acrobat Series
SD-SA-DK-B Acrobat Swing Arm
The SD-SA-DK offers the ultimate in desktop versatility.
With two separate pivot/adjustment points, the user has excellent control over their monitor position in terms of height, swing, tilt and screen rotation.
Height adjustment is effortless due to the monitor weight counter balancing gas strut mechanism which glides the monitor into position.
Screen tilt and pan of up to 40° is also made simple with a ball joint integrated into the arm to position the screen for the optimum viewing angle.
Combined, these features ensure that all adjustments can be made from a seated position.
Ease of use clearly drives this mount making it an obvious choice for ergonomic excellence and user productivity.
• Supports displays from 3kg (6.6lbs) to 9kg (19.8lbs)
• Supports VESA mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• Offers a wide range of movement via 2 pivot points
• Ball joint mechanism allows +/-40° of display adjustment in any direction from the vertical plane
• Portrait to landscape rotation with gas strut height adjustment from a seated position
• Arm maximum reach: 375mm (14.75")
• External cable management Picture: Cable management (opens in new tab or window)
• Display height adjustment range: 460mm (18")
• Bolt through desk, and desk clamp mounting options included
• Comes with all mounting hardware
All hardware included
SD-SA-DK-B Black $245+GST
1/11
SD-SA-DK-DB-BK Acrobat Swing Arm Double
The ultimate space-saving mount for two monitors up to 19.8lbs (9kg) in weight.
The SD-SA-DK-DB allows users to create their ideal working position to suit height and posture, enhancing productivity and occupational safety.
Ideal for users who need to work multiple applications across two screens, this mount is highly flexible and effortlessly adjustable.
Screen height, tilt and pan can be easily changed with simple adjustment mechanisms that support this user-friendly design.
As each can moved independently, 2 monitors can be aligned in any way that suits the user.
• Supports displays from 3kg (6.6lbs) to 9kg (19.8lbs) per display
• Supports VESA mounting hole patterns:
75mm x 75mm; 100mm x 100mm
• Each arm offers a wide range of movement via 2 pivot points
• Ball joint mechanism allows +/-40° of display adjustment in any direction from the vertical plane
• Portrait to landscape rotation with gas strut height adjustment from a seated position
• Arm maximum reach: 375mm (14.75")
• External cable management
Picture: Cable management (opens in new tab or window)
• Bolt Through and Desk Clamp mounting options are included
• Display height adjustment range 460mm (18")
• Comes with all mounting hardware
All hardware included
SD-SA-DK-DB-BK Black $414+GST 1/11
SD-AT-DK Acrobat
Articulated Arm
The SD-AT-DK offers the ultimate in desktop versatility.
With three separate pivot/adjustment points, the user has full control over their monitor position in terms of height, reach, tilt and screen rotation.
Height adjustment is effortless due to the monitor weight counter balancing gas strut mechanism which glides the monitor into position.
Screen tilt and pan of up to 40° is also made simple with a ball joint integrated into the arm to position the screen for the optimum viewing angle.
Combined, these features ensure that all adjustments can be made from a seated position.
• Support displays fom 3kg (6.6lbs) to 9kg (19.8lbs)
• Supports VESA mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• Offers a wide range of movement via 3 pivot points
• Ball joint mechanism allows +/-40° display of adjustment in any direction from the vertical plane
• Portrait to landscape rotation with gas strut
height adjustment from a seated position
• Arm maximum reach: 635mm (25")
• Includes both Bolt Through and Desk clamp mounting options
• Display height adjustment range: 460mm (18")
• External cable management
Picture: Cable
management (opens in new tab or window)
• Comes with all mounting hardware
SD-AT-DK-B Black $296+GST 1/11
SD-AT-DK-P Polished $296
SD-AT-DK-S Silver
See also the Visidec Focus Articulated arms below Single & double arms on pole
Desk Mounting Options (click to view)
Desk Clamp - suits work surfaces up to 38mm thick
Bolt Through - suits work surfaces up to 40mm thick
Desk Mount Arms, ctd.
Visidec Focus Family
Vertical adjustment is achieved by moving a collar up or down the pole, or track in the wall mount.
This is different from the Spacedec range above, which use a gas strut to support a vertical movement.
Maximum weight is less than with Spacedec range above.
The VISIDEC Focus range incorporates Atdec's FlexiStar™ mechanism – a unique universal LCD screen attachment head which allows users to adjust their VISIDEC Focus mount to suit 75 x 75mm (3" x 3") and 100 x 100mm (4" x 4") mounting hole patterns.
The Green Star compliancy applies to the product with extra long 590mm pole
(special projects only, not available as standard stock)
What is Green Star? (Green Star site, opens in new tab or window)
Atdec Green Star (click to view)
Earn Green Star points with Atdec products, add value to your projects.
IEQ-4 "Daylight Glare Control", Green Star Office Interiors v1.1 Technical Manual:
"1 point is awarded where all workstation monitors provided as part of the tenancy fitout are flat-screen and are mounted on an adjustable arm that enables the monitor to be pivoted and adjusted horizontally and vertically. Adjustable arms must have at least two articulations and be able to provide the monitor with a vertical and horizontal displacement of at least 50cm.
The adjustable arm must allow the monitor to be pivoted vertically and horizontally, and should provide the user with the capacity to orient the monitor perpendicular to the two nearest facades"
Click on a picture to jump down to the details
Focus Articulated
Arm
VF-AT Articulated Arm Pole mounting
You can now upgrade this Focus arm to a dual screen configuration by simply purchasing the Focus VF-AT-AA accessory arm (next item)
The Visidec Focus VF-AT is the ideal ergonomic and space saving desk mount for any home or office.
It's elegant design and polished aluminum finish add style and functionality to any workspace.
The broad range of movement from the pivot points on the arm and height adjustability create a workspace customizable for any user in any position.
The screen can be pulled out 413mm (16.25") for the ideal focal length and rotated 360° around the pole.
The optimum viewing angle can also be achieved with a 70° up and 70° down tilt, and pan of 180°.
Versatility extends to monitor choice, thanks to our FlexiStar mechanism that allows two different mounting hole patterns.
Cables are cleverly managed internally for a clean look and to reduce clutter.
• Supports a maximum weight of 8kg (17.5lbs)
• Supports mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• Offers a wide range of movement via 3 pivot points
• 360° rotation around pole
• Adjustable tilt: 70° up and 70° down
• Adjustable pan: 90° left and right, total 180°
• Portrait to landscape rotation
• Includes Bolt Through and Desk Clamp mounting options
• Arm maximum reach: 413mm (16.25")
• Display height adjustment range: 345mm (13.5")
• Advanced cable management
• Comes with all mounting hardware
Includes Bolt Through and Desk Clamp
mounting options
Internal cable management
All hardware included
Brochure
& larger pic (opens in new tab or window)
VF-AT Focus Articulated Arm, Polished $176+GST 1/11
Option: see Notebook Tray Accessory below - add a tray to hold your Notebook
Add an arm to make a double!
VF-AT-AA Focus Accessory Arm
This elegant polished aluminum accessory arm easily upgrades the single VF-AT to support a second monitor for dual screen applications.
Creating a highly ergonomic workspace, this strong yet sleek design provides the user with superior control over screen position.
The 2 arms independently adjustable.
The additional arm can be tilted by 70° up and down & panned through 180°.
This allows applications in either landscape or portrait, no matter the desired position of the other screen. Holds monitors of up to 8kg (17.5lbs).
The arm suits two different VESA mounting hole patterns:
75x75mm or 100x100mm
VF-AT-AA Focus Accessory Arm $168+GST 1/11
(can be used with the Focus Single, Micro & Notebook Pole)
VF-AT-D Focus Articulated Arm - Double
VF-AT-D One pole with 2 articulated
arms
for 2 screens 8kg max per screen
For users who require a dual monitor configuration, the Visidec Focus VF-AT-D polished aluminum mount can revolutionize any workspace.
This desk mount supports two LCD flat screens and frees up valuable desk space for enhanced productivity.
Holding the two displays side by side or back to back, viewing comfort and productivity is dramatically increased through easy repositioning of the screens by adjusting your screens in and out for the ideal focal length.
Ergononomic by design, tilt, pan, rotation, display height and focal distance are adjustable by the user with fingertip control.
Cables are cleverly managed internally for a clean look and to reduce clutter.
• Supports a maximum weight of 8kg (17.5lbs) per display, 16kg (35lbs) in total
• Supports mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• Offers wide range of movement via 3 pivot points on both arms
• 360° rotation around pole, 240° rotation at shoulder
• Adjustable tilt: 70° up and 70° down
• Adjustable pan: 90° left and right, total 180°
• Portrait to landscape rotation
• Arm maximum reach: 467mm (18.25")
• Display height adjustment range: 315mm (12.5")
• Includes Bolt Through and Desk Clamp mounting options
• Advanced cable management
• All mounting hardware included
VF-AT-D Focus Articulated Arm Double,
Polished $328+GST
VF-M Focus Micro Pole mount, no arm
VF-M Pole mounting with no arm
The Visidec Focus VF-M is designed specifically for areas where space is limited but flexibility is key.
It's elegant design and polished aluminum finish add style and functionality to any workspace.
This compact mount allows 70° up and 70° down tilt, and pan of 140 degrees of your display.
360 degree rotation around the pole makes it easy sharing your screen with others.
Bolt through and desk clamp mounting options are both included providing greater flexibility when choosing an optimal place for display position.
Versatility extends to monitor choice, thanks to Visidec's FlexiStar mechanism that allows two different mounting hole patterns: 75mm x 75mm and 100mm x 100mm.
Cables are cleverly managed internally for a clean look and to reduce clutter.
• Supports a maximum weight of 8kg (17.5lbs)
• Supports mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• 360° rotation around pole
• Adjustable tilt: 70° up and 70° down
• Adjustable pan: 70° left and right, total 140°
• Portrait to landscape rotation
• 345mm (13.5") display height adjustment range
• Includes Bolt Through and Desk Clamp mounting options
• Advanced cable management
• All hardware included
• Distance from centre
of pole to rear of display 115mm (4 ½")
• Maximum
height to centre of display 439mm (17 ¼")
VF-M Focus Micro Polished $143+GST 1/1
Option: see Notebook Tray Accessory below - add a tray to hold your Notebook
VESA Mount Compliance Explained (click to view)
The Video & Electronics Standards Association of USA (VESA) has issued suggested standards for the attachment mounting systems for electronic visual displays. This is how the mount attaches to the display itself.
Whilst these standards are quite detailed the basic details of the standards involve the size of the display and the relevant spacing and sizing of the hole to mount the display.
Screen Size
12 inch to 23 inch Displays (305mm to 583mm)
Hole pattern: 4 holes M4 screw thread
75mm x 75mm (3"x3" approx.) or
100mm x 100mm (4"x4" approx.)
23 inch to 30.9 inch (584mm to 787mm)
Hole Pattern: 6 holes M4 screw thread
100mm x 200mm (4" x 8" approx.)
31 inch to 90 inch (787mm to 2286mm)
Hole Pattern: increments of 8 inches (200mm)
Up to 50 kg M6 screw thread Over 50 kg M8 screw thread
If you require additional details please refer to: http://www.vesa.org/
Any user should use their own investigations to ensure that any panel they decide upon complies with these standards.
Desk Mount Arms, ctd.
Display Range Pole Mounts
SD-POS-VBM Display POS Multi - single, or back to back
Suits
LCD Flat Panel Displays from 12" (30cm) to 24" (61cm)
Has VESA mounting hole patterns:
75x75mm (3" x 3") and 100x100mm (4" x 4")
Supports a maximum weight of 11.5kg (25.3lbs) per display
Display pole can
be configured fixed,
or to rotate 90°, 180°, 270° or 355°
Maximum height to centre of display 330mm (13")
Features +/-40°
angular adjustment
Features portrait/landscape rotation
All hardware
included
Security features
include:
Internal cable management: through the post
via a cable port located directly behind the screen
The fixing screws location is concealed behind the self adhesive cover ring
Security cable fixing point provided
Pole Locking Mechanism:
The degree of rotation (90°, 180°, 270° or 355°) can be fixed prior to installation.
The pre-set degree of rotation options are shown on the base
of the unit enabling easy installation. Cables exit underneath through the large internal diameter post.
(Replaces SD-POS-M & SD-POS-M-V1)
Available in Back to Back configuration (kit sold separately)
SD-POS-VBM POS Single, Black $161+GST 1/12
SD-POS-VBM-B2B POS
Multi Vesa Ball Mount Back to Back, Black $80+GST 1/11
(requires an SD-POS-VBM above, to complete
the unit, sold separately)
SD-POS-HA Display POS Height Adjustable -
NEW PRODUCT
A highly versatile mount that's highly user-friendly, safe and secure, and guaranteed to provide a professional, clean finish to any desktop, point of sale, or touch screen application.
The POS Multi Adjustable creates an individualized display, allowing you to easily mount and adjust screens up to 25kg (55lbs) to your exact height position without the need for any tools.
Using the built in handgrip the pole can be effortlessly rotated and height adjusted between 305 and 450mm (12" and 17.75"), as well as 20 degree display adjustment in any direction.
Rotation of the screen can also be fixed to various settings to allow for touch screen applications.
Internal cable management and the ability to feed cables either through or above the work surface ensure a professional installation, with enhanced theft resistance thanks to concealed mounting hardware and a security screw mechanism.
This mount is compatible with two different VESA patterns,
either 75 x 75mm (3"x3") or 100 x 100mm (4"x4"),
and can also be converted into a dual mount, holding two screens back-to-back (accessory kit sold separately, see next item)
• Supports maximum weight of 20kgs (44lbs) per mount
• Supports mounting hole patterns:75mm x 75mm;100mm x 100mm
• Height adjustment range:
125mm (4.92") from centre of the display (min 330mm (13"), max 455mm (17.91")
• Pole diameter: 50.8mm (2")
• Ball joint mechanism allows 20 degrees of display adjustment in any direction from the vertical plane
• Quick release mechanism for fast display attachment/removal
• Optional pole rotation settings: 0°, 90°, 180°, 270° or 355°
• Portrait to landscape rotation
• Superb security features
• Internal cable management with three entry/exit points
• Back to back dual screen conversion accessory SD-POS-HA-B2B (sold separately)
• Comes with all mounting hardware
SD-POS-HA Display POS Height Adjustable, black $184+GST
SD-POS-HA-B2B Display POS Height Adjustable Back to
Back
- attaches to the item above
(requires 1 x SD-POS-HA above, sold separately)
• Dual configuration accessory for the Spacedec SD-POS-HA display mount
• Easily converts single display mount into a back-to-back configuration
• All mounting hardware included
SD-POS-HA-B2B Display POS Height Adjustable Back to Back, black $106+GST
SD-DO Display
Quick Shift Donut
(replaces both 42 & 50mm donut)
SD-DO Spacedec Display Quick Shift Donut
• Readily adapts to poles 42mm and 50mm
(1.65” and 2”) in diameter
• Easy display adjustment for any
viewing angle range up to 40-degrees
• “Quick Release” mechanism
for hassle-free and secure removal or replacement of the display
SD-DO
Donut, Black $104+GST 1/11
SD-DP-xxx Display Donut Pole Single
Cable Management is provided for the Donut Poles.
SD-DP-420 Display Donut Pole 420mm
with Quick Shift Donut, black: $149+GST 1/11
Includes Pole, 420mm high, & one SD-DO Donut,
plus Combo Desk Clamp &
Bolt Through mounting options.
Dimensions:
46
x 23 x 14cm, 2.5kg
Additional donuts are sold separately
SD-DP-420 is the new part no. for SD-DP-SI-BK
Taller poles
SD-DP-750 Display Donut Pole 750mm
- New Quick Shift Donut, black: $204+GST 1/11
Includes Pole & One Donut, plus Combo Desk Clamp & Bolt Through mounting options.
Additional donuts sold separately. 79 x 23 x 14cm, 3kg
SD-DP-1150 Display Donut Pole 1150mm - New Quick Shift Donut, black: $262+GST 1/11
Includes Pole & One Donut plus Combo Desk Clamp & Bolt
Through mounting options
Additional donuts sold separately. 120 x 23 x 14cm, 3.9kg
Cable Management is provided for
VISIDEC Freestanding and SPACEDEC Donut Pole
Either
Integrated Cable Management
A moveable, pole mounted cable guide which allows freedom for the cables to move with any adjustment to height,
or
Internal Cable Management
A slot which provides easy concealment of cables down the pole by using the locking balls in a pole channel
Wall Mount Monitor Arms - Spacedec Acrobat
Other sections on this page: 
Desk Mounts Freestanding mounts
VESA Mount Compliance Explained (click to view)
The Video & Electronics Standards Association of USA (VESA) has issued suggested standards for the attachment mounting systems for electronic visual displays. This is how the mount attaches to the display itself.
Whilst these standards are quite detailed the basic details of the standards involve the size of the display and the relevant spacing and sizing of the hole to mount the display.
Screen Size
12 inch to 23 inch Displays (305mm to 583mm)
Hole pattern: 4 holes M4 screw thread
75mm x 75mm (3"x3" approx.) or
100mm x 100mm (4"x4" approx.)
23 inch to 30.9 inch (584mm to 787mm)
Hole Pattern: 6 holes M4 screw thread
100mm x 200mm (4" x 8" approx.)
31 inch to 90 inch (787mm to 2286mm)
Hole Pattern: increments of 8 inches (200mm)
Up to 50 kg M6 screw thread Over 50 kg M8 screw thread
If you require additional details please refer to: http://www.vesa.org/
Any user should use their own investigations to ensure that any panel they decide upon complies with these standards.
SD-SA-DW Acrobat Swing Arm - Wall
Wall mounting Swing Arm
The SD-SA-DW wall mount helps to conserve valuable desk space by mounting monitors on a wall.
This leaves a monitor footprint of zero and creates an extremely productive workspace, free from clutter.
It offers the ultimate in versatility.
With two separate pivot/adjustment points, the user has excellent control over their monitor position in terms of height, swing,, tilt and screen rotation.
Height adjustment is effortless due to the monitor weight counter balancing gas strut mechanism which glides the monitor into position.
Screen tilt and pan of up to 40° is also made simple with a ball joint integrated into the arm to position the screen for the optimum viewing angle.
Combined, these features ensure that all adjustments can be made from a seated position.
• Supports a maximum weight of 9kg (19.8lbs)
• Supports VESA mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• Offers a wide range of movement via 2 pivot points
• Ball joint mechanism allows +/-40° of display adjustment in any direction from the vertical plane
• Portrait to landscape rotation with gas strut height adjustment from a seated position
• External cable management Picture: Cable
management (opens in new tab or window)
• Arm maximum reach : 375mm (14.75")
• Display height adjustment range: 460mm (18")
• Bolt through and desk clamp mounting options included
• Comes with all mounting hardware
SD-SA-DW-BK Black $245+GST 1/11
SD-SA-DW-S Silver $245
SD-AT-DW-BK Acrobat Articulated Arm - Wall
The SD-AT-DW wall mount helps to conserve valuable desk space by mounting monitors on a wall.
This leaves a monitor footprint of zero and creates an extremely productive workspace, free from clutter.
It
offers the ultimate in versatility.
With three separate pivot/adjustment points, the user has full control over their monitor position in terms of height, reach, tilt and screen rotation.
Height adjustment is effortless due to the monitor weight counter balancing gas strut mechanism which glides the monitor into position.
Screen tilt and pan of up to 40° is also made simple with a ball joint integrated into the arm to position the screen for the optimum viewing angle.
Combined, these features ensure that all adjustments can be made from a seated position.
Ease of use clearly drives this mount making it an obvious choice for ergonomic excellence and user productivity.
• Supports a maximum weight of 9kg (19.8lbs)
• Supports VESA mounting hole patterns: 75mm x 75mm; 100mm x 100mm
• Offers a wide range of movement via 3 pivot points
• Ball joint mechanism allows +/-40° of display adjustment in any direction from the vertical plane
• Portrait to landscape rotation with gas strut height adjustment from a seated position
• External cable management Picture: Cable management (opens in new tab or window)
• Arm maximum reach: 635mm (25")
• Display height adjustment range: 460mm (18")
• Comes with all mounting hardware
SD-AT-DW-BK Black $296+GST 1/11
Adaptor Plate
Converts 75 x 75mm mounting pattern to 200 x 100mm
Accessory
Adaptor Plate 200 x 100mm Larger
Picture (opens in new tab or window)
Converts 75 x 75mm mounting pattern to 200 x 100mm
Black
AC-AP-2010 $51+GST 1/11 This item is also shown on the Telehook page
See also
Wall Mount Articulated Arm - Visidec
range - up to 6kg, see below 
Direct
Wall Mounts - Visidec range - up to 8kgs, see below 
SD-WD Spacedec Display Wall Direct
SD-WD Spacedec Display Wall Direct
The SD-WD mount is a low profile, robust design created to cope with demanding commercial environments and a heavy work load requiring quick installation and very flexible screen positioning.
Despite its durability, the mount doesn't compromise on ease of adjustment.
Supporting screens of up to 55lbs (25kg), the range of movements include 20 degree infinite adjustment in any direction, portrait to landscape rotation and a quick release mechanism for easy screen changing. Installation is fast and simple with a choice of VESA mounting hole patterns to increase monitor compatibility.
• Supports a maximum weight of 25kg (55bs)
• Supports mounting hole patterns:75mm x 75mm;100mm x 100mm
If you require 200mm x 100mm, add the Adaptor Plate (below) to your order
• Designed for simple installation
• Distance from wall: 77mm (3")
• Ball joint mechanism allows 20 degrees of display adjustment in any direction from the vertical plane
• Quick release mechanism for fast display attachment/removal
• Comes with all mounting hardware
Dimension
Diagrams (pdf file, opens in new tab or window)
SD-WD Spacedec Display Wall Direct: $87+GST 1/11
Wall Mounts, ctd. - Visidec Focus
With the Visidec Focus range, vertical adjustment is achieved by moving a collar up or down the pole, or track in the wall mount.
This is different from the Spacedec range above, which use a gas strut to support a vertical movement.
Maximum weight is less than with Spacedec range above.
The VISIDEC Focus range incorporates Atdec's FlexiStar™ mechanism – a unique universal LCD screen attachment head which allows users to adjust their VISIDEC Focus mount to suit 75 x 75mm (3" x 3") and 100 x 100mm (4" x 4") mounting hole patterns.
VF-AT-W Focus Articulated Arm - Wall Mount
VF-AT-W
Wall mount
For a professional finish alongside effortless adjustability, Visidec Focus VF-AT-W is the ideal wall mount.
Sleek and contemporary by design, It's elegant polished aluminum finish adds style and functionality to any workspace.
Three highly flexible joints allow your screen to be pulled out from the wall and folded back in on itself, be tilted by 70° up and 70° down, rotated from portrait to landscape and panned through a 180°.
Height adjustment is an effortless process, with cutting edge engineering designed to allow you to move the monitor effortlesslyup or down the wall track.
Cables are cleverly managed internally for a clean look and to reduce clutter.
• Supports a maximum weight of 8kg (17.5lbs)
• Supports mounting hole patterns:75mm x 75mm;100mm x 100mm
• Offers a wide range of movement via 3 pivot points on both arms
• Portrait to landscape rotation
• Adjustable tilt: 70° up and 70° down
• Adjustable pan: 90° left and right, total 180°
• Arm maximum reach: 454mm (17.8")
• Minimum distance from wall: 109mm (4.25")
• Display height adjustment range: 128mm (5")
• Advanced cable management
• Locking mechanism to support the weight of the screen during height adjustment
• Comes with all mounting hardware
VF-AT-W Focus Articulated Arm Wall Mount, Polished $168+GST 1/11
VF-WD Focus Wall Mount - Direct
VF-WD
The Visidec Focus VF-WD provides a compact, low profile solution for wall displays that do not require full motion.
This is the ultimate space-saving mount designed to maximise visual impact without compromising valuable space. Holding the screen just a few inches from the wall, adjustment for the perfect viewing angle is simple.
Horizontal to vertical rotation, and tilt and pan enable the screen to be set at the optimum viewing position.
Installation is simple and incorporates Visidec's FlexiStar mechanism which adapts to two different mounting hole patterns – either 75 x 75mm or 100 x 100mm.
• Supports a maximum weight of 8kg (17.5lbs)
• Supports mounting hole patterns:75mm x 75mm;100mm x 100mm
• Adjustable tilt: 40° up and 40° down
• Adjustable pan: 45° left and right, total 90°
• Portrait to landscape rotation
• Distance from wall: 94mm (3.75")
• Comes with all mounting hardware
• Rear of display is 94mm (3 ¾") from the wall
VF-WD Focus Wall Mount Direct, Polished $72+GST
See also Wall Mounts - Spacedec Acrobat above. These can take heavier screens.
VESA Mount Compliance Explained (click to view)
The Video & Electronics Standards Association of USA (VESA) has issued suggested standards for the attachment mounting systems for electronic visual displays. This is how the mount attaches to the display itself.
Whilst these standards are quite detailed the basic details of the standards involve the size of the display and the relevant spacing and sizing of the hole to mount the display.
Screen Size
12 inch to 23 inch Displays (305mm to 583mm)
Hole pattern: 4 holes M4 screw thread
75mm x 75mm (3"x3" approx.) or
100mm x 100mm (4"x4" approx.)
23 inch to 30.9 inch (584mm to 787mm)
Hole Pattern: 6 holes M4 screw thread
100mm x 200mm (4" x 8" approx.)
31 inch to 90 inch (787mm to 2286mm)
Hole Pattern: increments of 8 inches (200mm)
Up to 50 kg M6 screw thread Over 50 kg M8 screw thread
If you require additional details please refer to: http://www.vesa.org/
Any user should use their own investigations to ensure that any panel they decide upon complies with these standards.
Ceiling Mounts for large screens
Spacedec Display Ceiling Mount are discontinued
See Ceiling
Mounts - Telehook
(separate page, opens in new tab or window)
Freestanding Screen Mounts - Visidec Other sections on this page: See below this for Notebook tray and stand |
|
Visidec
|
|
For Notebook Computers
- Desk Mount
Notebook Tray - accessory for the Visidec Focus range
VF-AT-NK Notebook Tray is an innovative upgrade
for the Visidec VF-AT Focus Single & Micro above.
It maximises desk space and reduces the potential for occupational injury for notebook users.
The ventilated tray supports notebooks of up to 18" and fits onto your existing VF-AT monitor mount. It has its own arm that can be set at the optimum height to ensure a healthy posture and can be positioned in and out for the ideal focal length.
Viewing angle can be tilted up to 35° forward to reduce screen glare and advanced cable management removes wire clutter.
The overall effect is a more ergonomic workspace, leaving the user free to achieve their productive and creative potential.
• Supports a maximum weight of 8kg (17.5lbs)
• Non-slip ventilated notebook tray supports notebooks up to 18.4"
• Offers a wide range of movement via three pivot points
• 360° rotation around pole
• Tray adjustable tilt: from 15° to 35° of forward tilt
• Adjustable pan: 90° left and right, total 180°
• Designed to be used in conjunction with a separate keyboard and mouse
• Advanced cable management
• Comes with all mounting hardware
• Maximum arm reach 380mm to centre of tray (end of arm)
• Ventilated tray area 300mm wide x 272mm long
• Tray
tilt range 25°
• Non slip tray surface
VF-AT-NK Focus Notebook Accessory, Polished $181+GST 1/11
(can be used with the Focus Single & Micro)
Pole
VF-AT-NP Focus Notebook Pole Polished $184+GST 1/11
Notebook Stand for desk
Visidec Traveller 14T
For any mobile computing enthusiast, the Visidec V-14T is an essential notebook accessory.
It creates a mobile ergonomic workspace by raising the notebook screen to the correct height for the user.
This limits the potential occupational stresses and strains commonly associated with notebook use.
Designed for use with an external keyboard and mouse, this mount supports notebooks up to 14" with innovative features focused on the needs of any busy traveller – lightweight construction and ease of use alongside an extremely slim line form.
It folds down to just 11mm (0.5") thick so it can easily fit in your notebook bag.
• Supports a maximum weight of 3kg (6.6lbs)
• Supports notebooks up to 14"
• Strong and lightweight aluminum construction
• Designed to be used in conjunction with a separate keyboard and mouse
• Slimline design folds down to 11mm (½") thick for easy transport
• Designed to help minimise heat build up
• Four height settings
• Light weight design. Only 580g (1.3lbs)
• Travel Pouch included
• Does not require assembly
V-14T
Visidec Traveller 14T: $50+GST U
p 1/11
See also Telehook mounts for larger screens (opens in new tab or window)
Delivery time: small quantities: usually within a week.