Wall Monitor Mounts
Wall Mounts for LCD screens & Keyboards
Vertical Lift      - Ergotron

Adjusting, lifting and pivoting with just a touch,
reducing glare and improving sight lines for optimal viewing,
thanks to Ergotron's patented Constant Force (CF),
and weight adjustability.

On this page:  

More Wall Mounts
    - see also separate page:
Wall Mounts, Desk mounts - Atdec (new tab)

   

Prices do not include GST and may change without notice.

Price range indications: 
     $1 to  $250:   $
$250 to  $500:    $$
$500 to $1000:   $$$
$1000 to $2500: $$$$
        over $2500:  $$$$$

Ergotron after sales product and warranty support

1300-957508 (AU)  or  0800-451180 (NZ)
[email protected]

A serial number is required

Download Ergotron Catalog 2015 (pdf file, 48 pages, 4MB, opens in new tab)


     

VESA Mount Compliance Explained (click to view)

The Video & Electronics Standards Association of USA (VESA) has issued suggested standards for the attachment mounting systems for electronic visual displays. This is how the mount attaches to the display itself.

Whilst these standards are quite detailed the basic details of the standards involve the size of the display and the relevant spacing and sizing of the hole to mount the display.

Screen Size

12 inch to 23 inch Displays (305mm to 583mm)
Hole pattern: 4 holes M4 screw thread
75mm x 75mm (3"x3" approx.) or
100mm x 100mm (4"x4" approx.)

VESA MIS-D, 100/75, C compliant monitors are equipped with either a 100 x 100 mm or 75 x 75 mm mounting hole pattern. This is the most common interface for monitors weighing under 30 lbs (14 kg).

23 inch to 30.9 inch (584mm to 787mm)
Hole Pattern: 6 holes M4 screw thread
100mm x 200mm (4" x 8" approx.)

VESA MIS-E, C compliant monitors are equipped with a 200 x 100 mm mounting hole pattern. Mid-size displays may use this interface. eg. Ergotron the NeoFlex HD Wall Mounts.

31 inch to 90 inch (787mm to 2286mm)
Hole Pattern: increments of 8 inches (200mm)
Up to 50 kg M6 screw thread Over 50 kg M8 screw thread

VESA MIS-F, C compliant monitors have varied hole patterns that are spaced in 200 mm increments (e.g., 400 x 200 mm and 600 x 400 mm are VESA MIS-F compliant configurations).
Large displays often follow this standard.
Products like the Ergotron TM and WM are designed to handle these large displays.

If you require additional details please refer to: http://www.vesa.org/

Any user should use their own investigations to ensure that any panel they decide upon complies with these standards.

 

Ergotron... designing ergonomic workstations for 25 years.
With over 35 patents—including those for the first articulating LCD arms—Ergotron leads the industry in making the workplace and homes more comfortable for display users everywhere.         hmf

Patented Constant Force (CF) lift-and-pivot motion technology adjusts with just a touch, reducing glare and improving sight lines for optimal viewing.
Now fingertip adjustment of LCD monitors and TVs is available in scalable, single-SKU mounting products that are as easy to install as they are to use.
The CF design provides weight adjustability, which is accomplished by the twist of a screw.
The adjustment can be made during the installation process at home or at the office.

Warranty periods vary from 12 months to 5 years.
All standard warranties are return to base unless stated otherwise.
There are a variety of service and warranty packages including on-site support and contract agreements.
Warranty details: click here (Ergotron site, opens new window)


Highlights of Ergotron® Neo-Flex™ Lift Stands

• Position LCD screens for maximum ergonomic comfort—promotes wellness in any work area
• Small footprint frees up your workspace and increases your efficiency
• Integrated base rollers enable 360° rotation of the stand so you can share your views with others

• Embedded with patented motion technology,  light touch adjustments without any knobs or levers
• Five-inch (12.7 cm) height adjustment ergonomically accommodates average range of users
• Easy to use—simple installation and effortless operation

• Everything is included to neatly route cables behind the stand, out of the way
• Patented Constant Force (CF) lift-and-pivot motion technology—no levers or buttons.
• Five-inch (12.7 cm) height adjustment ergonomically accommodates average range of users.

• Portrait to landscape screen rotation - abbreviated to P/L in the descriptions below.
• Pans 360° side-to-side at base
• VESA® compliant

• Good warranty - from 12 months to 5 years


    See below for Wall Mounts for Larger Screens

Monitor Mounts
Wall Mounts - Ergotron

TV Mount

TV Wall Mounts

Interactive Arm, LD (polished aluminium)

45-299-02645-299-026 mounting45-299-026   Interactive Arm, LD (polished aluminium)     $
Suitable for 19"-32" displays
Includes arm, wall mount bracket, VESA adapter brackets, complete hardware kit.

Don't just sit and watch your TV—get up and interact with it!
This affordable interactive TV mount is designed to accommodate most active TV positioning needs of today and tomorrow.
Lift, swing or turn your TV/display!
Position the screen to relieve eye, neck and back strain.
Equipped with patented Constant Force Technology, the arm provides fluid, light touch adjustments for effortless TV/display movement.
Warranty: 5 Years    Data sheet on 45-299-026 & 45-296-026 (pdf file, opens in new tab)


Interactive Arm, HD (polished aluminium)

45-296-02645-296-026   Interactive Arm, HD (polished aluminium)     $$
Suitable for 30"-55" displays
Includes arm, wall mount bracket, VESA adapter brackets, complete hardware kit.

Accommodate the active TV positioning needs of today and tomorrow.
Lift, swing or turn your display in any direction!
Features 20" (51cm) of vertical adjustment and 17.5" (45cm) motion
adjustment to either side.
Now anyone can effortlessly move their TV into multiple positions with only a light touch.
Your screen will seemingly float on air, being easily adjusted between standing and seated heights.
No more awkward viewing angles and sore necks.
Warranty: 5 Years    Data sheet on 45-299-026 & 45-296-026 (pdf file, opens in new tab)

 

LX Wall Mount LCD Arm, 12" - 24" displays  

45-243-026   LX Wall Mount LCD Arm
LCD Size  12" up to 24"
Capacity:   3.1–9.1 kg  Monitor depth may affect weight capacity. More info
Lift:   33 cm
Tilt:  85°
Pan:  360°
Rotation:  360° P/L
VESA:   MIS-D

Durable polished aluminum construction. Tested to perform 10 times the expected life-cycle of other competitive brands at roughly half the price. Sleek and streamlined, the LX frees up space and allows positioning of your display for greater productivity.

Reposition your LCD with just a touch. Up. Down. Forward. Back. The LX provides unparalleled range of motion.

Cable management feature routes cables under the arm, out of the way
Extends LCD up to 25" (64 cm); push your display out of the way when not in use
13" (33 cm) height range meets the ergonomic needs of more than nine out of ten adults

Arm folds back over the base into a compact retracted position; perfect for tucking under systems furniture storage shelves or cabinets in space constrained areas

Improved LX Arm Features & Benefits
Polished aluminum construction offers greater durability and enhanced aesthetics
Arm folds back over the base into a compact retracted position
Snap-fit cap secures interface of arm to extension for greater stability

Mounting Options: Attaches directly to sturdy vertical surfaces. Where applicable, install to wood stud.
Also attaches to Wall Plate, or to Wall Track using bracket 97-091 (order separately)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Weight Capacity: 3.1 to 9.1 kg
Base includes theft deterrent anchor holes for cable locks
* Monitor depth may affect weight capacity.
Shipping Dimensions: 53mm H x 29mm W x 19mm D cm     Shipping Weight: 7.0 lbs (3.2 kg)
Warranty: Five (5) years
      Datasheet on 45-243-026 (pdf file, opens in new tab)

If mounting a laptop, also order the LX Notebook Tray (50-193-200)  

45-243-026   LX Wall Mount LCD Arm, CF, durable polished aluminium construction   $

LX Wall Mount LCD Arm

The LX Arm includes CF, Ergotron's patented lift-and-pivot motion technology. - DISCONTINUED
45-180-194  LX Wall Mount LCD Arm, CF™, silver:   - see above
45-180-195  LX Wall Mount LCD Arm, CF™, black:

LX Extension Suitable for LX LCD Arms

45-244-02645-244-026 LX Extension Suitable for LX LCD Arms  DISCONTINUED
Add a second extension to your LX Arm and increase its reach by 23 cm (9")    

 

 

MX Wall Mount LCD Arm - for up to 30” displays

45-228-026The sleek MX LCD Arm accommodates mid-sized displays and all-in-one computers weighing up to 13.6 kgs.
13 cm of height adjustment,
42 cm of extension/retraction motion,
integrated tilt and portrait-tolandscape rotation promote user comfort and enhance productivity.
Warranty: 5 Years    Data sheet on 45-228-026 (pdf file, opens in new tab)

45-228-026   MX Wall Mount LCD Arm,
                           CF, 13.6kg weight capacity, height adjustable, polished aluminium      $

 

Neo-FlexTM Wall Mount Lift

60-577-195 Neo-Flex Wall Mount Lift, CF™, black
Add greater range of movement to your LCD display or TV with the Neo-Flex Wall Mount Lift!
Patented CF lift-and-pivot motion technology adjusts with a light touch.
Raise or lower your LCD 5? (12.7 cm). Pan right or left. Tilt forward or back.
Even rotate 90° for portrait/landscape viewing.

• For 12” - 20” displays
• CF lift-and-pivot motion technology adjusts with a light touch
• Raise or lower your LCD 12.7cm
• Pan right or left, tilt forward or back, rotate 90° for portrait/landscape viewing

LCD Size: up to 22"    LCD Weight: 2.7–7.2 kg    
Lift: 12.7 cm    Tilt: 35°    Pan: 70°    Rotation: 90° P/L    VESA: MIS-D
    Data sheet on 60-577-195 (pdf file, opens in new tab)

60-577-195   Neo-Flex Wall Mount Lift, CF™, black:     $


LX Keyboard Arm

45-246-026 LX Keyboard Arm
Durable polished aluminum construction!
The LX Keyboard Arm mounts keyboards to any wall while providing vertical and side-to-side motion. Effortlessly position a keyboard to the most comfortable typing position, seated or standing.
• Position your keyboard for maximum comfort and productivity
• Arm extends keyboard tray to 89 cm (35"), and has 33 cm (13") height adjustment
• Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry — avoid repetitive-stress injuries while increasing comfort and productivity.
• Creates a complete workstation when paired with the LX LCD Arm.
• Easy to use—simple installation and effortless operation.
• Mouse tray slides out to left or right, depending on user preference.
• Ideal for space-constrained spaces—folds to within 3.5" (9 cm) of wall in storage position
• Integrated cable management

Includes LX arm, extension, keyboard tray, mouse tray, wall mount base, mouse holder, wrist rest
Arm can be used with or without the extension.
Improved LX Arm Features & Benefits:
Polished aluminum construction offers greater durability and enhanced aesthetics
Snap-fit cap secures interface of arms to extensions for greater stability.

Capacity: 2.2 kg,   Lift: 33 cm,    Tilt: 80°,    Pan:  360°

Mounting Options: Attaches directly to sturdy vertical surfaces. Where applicable, install to wood stud.
Also attaches to Wall Track using bracket 97-091 (order separately).
Fasteners for direct attachment to wood/metal studs or concrete surface are not included—customer supplied.
Base includes theft deterrent anchor holes for cable locks.
Shipping Dimensions: 20.75" x 11.25" x 7.5" (53 x 29 x 19 cm)     Shipping Weight: 9.7 lbs (4.4 kg)
Warranty: Five (5) years
      Data on 45-246-026 (pdf file, opens in new tab)

45-246-026   LX Keyboard Arm, includes gel wrist rest, mouse pouch and mouse pad, CF, durable
polished aluminium construction   $$

45-244-026LX Extension Suitable for LX LCD Arms

45-244-026 LX Extension Suitable for LX LCD Arms  DISCONTINUED
Add a second extension to your LX Arm and increase its reach by 23 cm (9")  $80+GST   7/11

 

Neo-Flex Dual Monitor Wall Mount   for 12”-24” displays

28-514-800 Neo-Flex Dual Monitor Wall Mount Suitable for 12"-24" displays

28-514-800Maximize space in imaging environments! This low-profile digital imaging solution enhances PACS implementation by providing convenient access to patient data.
Perfect low-profile replacement for the old "light box" x-ray viewer.
View two LCDs while using the optional keyboard tray.

Weight Capacity: 11.3 kg (25 lbs) per pivot;   total: 22.7 kg (50 lbs)
Tilt 180°   Rotation 360°  grey & black.   
Mounting: VESA FDMI, MIS-D, 100/75, C     (hole pattern: 100 x 100 mm & 75 x 75 mm)
Warranty: 5 Years

28-514-800   Neo-Flex Dual Monitor Wall Mount, grey       $$
Includes
two 100 Series Single Pivots,
26" Wall Track,
two Track Mount Bracket Kits. $314+GST   6/13
    Dimensions sheet (pdf file, opens in new tab)
 

Keyboard holder - see next item
 

45-403-062Neo-Flex Keyboard Wall Mount

45-403-062  Neo-Flex Keyboard Wall Mount

Reduce errors by entering data at the point of care. This low-profile solution easily folds up out of the way when not in use.

Tray can be extended up to 5" (13 cm), placing the keyboard up to 19.25" (49 cm) from the wall.

Side-to-side pan of keyboard promotes patient-caregiver interaction while accessing data.

Folds up flat when not in use for low-profile storage—depth is only 5" (13 cm) from wall.
Mouse tray slides out to left or right, depending on user preference.

Creates a complete digital imaging station when combined with the Neo-Flex Dual Monitor Wall Mount,  or the  Neo-Flex Wall Mount Lift.

      Data on 45-403-062   (pdf file, opens in new tab)


 

LX Sit-Stand Wall Mount Keyboard Arm

LX Keyboard Arm - Wall Mount45-246-026   LX Wall Mount Keyboard Arm   (polished aluminum)

45-354-026  LX Sit-Stand Wall Mount Keyboard Arm  (polished aluminum)

LX Sit-Stand Wall Mount Keyboard Arm

Effortlessly position a keyboard to the most comfortable typing position, while seated or standing.

The LX provides a very stable platform for a keyboard and mouse—tested to be 3x more rigid than other keyboard arms!
The tray's side-to-side adjustment mechanism allows the surface to be parallel, no matter where the keyboard is positioned, while its fore-aft back-tilt angle keeps hands and wrists in a comfortable, ergonomic position.
    Data sheet on 45-246-026   &   45-354-026
             (pdf file, opens in new tab)


28-513-100Neo-Flex Keyboard Wall Mount for 12”-24” displays

28-513-100  Neo-Flex Keyboard Wall Mount   - DISCONTINUED, use items above this
includes slide-out keyboard tray,
10” (25,4 cm) Wall Track, wrist rest, mouse pad, mouse holder, grey  $592+GST    7/12
Tray can be extended up to 5", placing the keyboard up to 16" from the wall.
Folds up flat when not in use for low-profile storage—only 4.5" from wall.
Mouse tray slides out to left or right, depending on user preference.
Weight Capacity: 2.3 kg                 Installation info (pdf file, opens in new tab)
28-513-100   Neo-Flex® Keyboard Wall Mount   $$$


Ergotron 100 Series'Ergotron 100 Series'

The 100 Series allows flat panel monitors, keyboards and laptops to be mounted with a minimum profile while providing side-to-side and forward-back pivot movement.
The patented friction system provides smooth adjustment while maintaining touch-screen stability.

The picture at right shows the 4 parts:
  Wall Track,
  Pivot (for screen,
                can be single or double, see below)
  Keyboard Pivot, and
  Keyboard Tray
Choose from
    Single Pivot with Portrait/Landscape (P/L),
    Double Pivot with Portrait/Landscape P/L, and
    Keyboard/Laptop Pivots to suit your application.
Multiple surface attachment and accessory options are available.

• Weight capacity up to 25 lbs (11.3 kg)
• Multiple keyboard tray options provide optimum ergonomic comfort
• Fold up keyboard against the wall when not in use
• Attaches to LCDs that are VESA ® MIS-D, 100/75, C compliant

Wall Track - 'Ergotron 100 Series'

31-016-182   Ergotron wall track, 10" length:   $
31-017-182   Ergotron wall track, 26" length:   $
31-018-182   Ergotron wall track, 34" length:   $

These are not normally stocked in Australia and lead time is usually approx. 8 weeks

Single Pivot for 12"-24" displays - 'Ergotron 100 Series'

47-092-800  'Ergotron 100 Series' Single Pivot,
            11.3kg weight capacity, grey/black
Low profile with smooth, patented tilt adjustment.  
LCD Size to 24"  Tilt 180°  Rotation 360° P/L (portrait/landscape)
Attach an LCD monitor/TV up to 11,3 kg quickly and easily. VESA MIS-D
Solid and stable platform for touch-screen monitor applications.
Includes: Grey and black pivot covers
Attaches directly to surface, although Wall Plate (97-101-003 next item) is recommended.
      Data on 47-092-800 '100 Series' (pdf file, 2005, opens in new tab)

47-092-800  'Ergotron 100 Series' Single Pivot:  $ 

Also used with 28-514-800 Neo-Flex Dual Monitor Wall Mount above,
and with the Wall Plate just below this.

Double Pivot for 12" - 24" displays - 'Ergotron 100 Series'

47-093-800   'Ergotron 100 Series' Double Pivot, 11.3kg weight capacity, grey/black
low profile with smooth, patented tilt and pan adjustment.
LCD Size to 24"  Tilt 180°  Rotation 360° P/L (portrait/landscape)
Attach an LCD monitor/TV up to 10,4 kg quickly and easily. VESA MIS-D
Solid and stable platform for touch-screen monitor applications.
Includes: Grey and black pivot covers
Attaches directly to surface, although Wall Plate (97-101-003 item above) is recommended.
      Data on 47-092-800 '100 Series' (pdf file, 2005, opens in new tab)

47-093-800   'Ergotron 100 Series' Double Pivot     $


47-094-800Keyboard Tray with mounting - 'Ergotron 100 Series'

47-094-800 Keyboard Pivot (does not include keyboard tray) - Ergotron 100 Series: $
                                Installation Manual (pdf file, opens in new tab)

77-050-180 Keyboard Tray to suit Ergotron100 Series Pivot: $ 

See picture above.
These are not normally stocked in Australia and lead time is usually approx. 8 weeks

 

Accessory
Vertical Universal CPU Case Holder - General Accessories

97-468-202 Vertical Universal CPU Holder
Ergotron CPU Holders offer a convenient method for storing your CPU or power supply—close to the action, yet out of the way.

Frees up work space
Mounting versatility: Installs directly to any sturdy vertical surface or Ergotron Wall Track system
Durable steel construction
Includes fasteners for locking the holder’s width
Accommodates CPUs from 2" to 8" (5 to 20 cm) wide
Handles loads up to 40 lbs (18 kg)

Includes CPU holder, spacer, bumpers, wall mount fasteners, security nuts and bolts
CPU Size Range: 50.8 to 203 mm wide; includes plastic spacer to accommodate most small form factor and ultra small form factor CPUs
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud.
To increase support, a Wall Track accessory and bracket kit (60-156 see next below), both ordered separately, are recommended
Shipping Dimensions: 8"H x 5.5"D x 10.5"W (203 x 140 x 268 mm)    Shipping Weight: 10 lbs (4.5 kg)
Warranty: Five (5) years

97-468-202 Vertical Universal CPU Holder. Ergotron CPU Holders offer a convenient method for
storing your CPU or power supply—close to the action, yet out of the way.   $

 

60-15660-156  Track Mount Bracket Kit for CPU Holders

Brackets are required for attaching components to Wall Track.
Use this bracket with the Vertical CPU Holders.
Easily slides into place on track.

Set-screws can be loosened to adjust height of component on track
Track Mount Bracket Kit (zinc)
Use with:
Vertical Universal CPU Holder (97-468-202) and Vertical Small CPU Holder (80-063-200)


 

Wall Plate    (this item is also in the Accessories table below)
97-101-003 Wall Plate to suit Pivots 47-092-800 & 47-093-800 above:   $

 

 

 


 

 

 

FX30 for 12" - 27" displays

60-239-007   FX30 for 12"-27" displays
Rock-solid platform for touch-screen monitor applications, very low profile.
Attach or remove an LCD monitor/TV quickly and easily.
Low Profile: 2 cm
Up to 13.6 kg
Solid and stable platform for touch-screen monitor applications.
Mounting Standards:
VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm).
For larger hole patterns (200 x 100 mm, 200 x 200 mm or 400 x 200 mm), order the VESA Bracket Adaptor Kit (97-759)

60-239-007   FX30 for 12"-24" displays:  $

 


Vertical Lifts for screen and keyboard - wall mount

StyleView Vertical Lift for 12"-24" displays - Patient Room

60-609-21660-609-216 (previously  60-594-216)   StyleView Vertical Lift
Perfect for space-constrained patient exam rooms, the low-profile vertical lift
provides 9" (23 cm) of smooth vertical adjustment
and folds into a slim, compact unit when not in use.

The slide-out, negative tilt keyboard enhances user comfort, while the monitor and keyboard pan capability promote patient-caregiver interaction. A unique cable management system conceals and organizes cords and makes cleaning a snap!

• Side-to-side pan of keyboard and display promote patient caregiver interaction while access data
• Slide-out Keyboard Tray can extend out an extra 5" (125 mm) for comfortable data entry
• With the keyboard folded up, total system depth is as little as 4.5" (114 mm)
• Ergonomic negative-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry
• Patented counterbalance system provides smooth adjustment while maintaining touch-screen stability
• 9" (229 mm) vertical adjustment enhances ergonomics for multiple users
• Steel construction for long-lasting durability
• Right- or left-side cable management system conceals and organizes cords and makes cleaning a snap!

LCD Size: 24"†     Capacity: *3.6-14.9 kg    Lift: 22.9 cm    Tilt: 10°    Pan: 50°‡   Rotation: —    VESA: MIS-D

Includes mouse pad, wrist rest, mouse pouch
† Larger display sizes may inhibit the keyboard tray folding flat in storage position
* Weight Capacity: Listed weight capacity represents total load, including both the monitor and contents of keyboard tray.
60-609-216 was 60-594-216Maximum monitor weight 11.3 kg; monitor thickness greater than 7.6 cm may decrease capacity
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
‡ Monitor pans left/right up to 50° (varies per size of monitor)

• Fold-down keyboard with built-in mouse pad surface
• Keyboard tray extends out up to 5 " (127 mm) inches when in use
• Keyboard tray pans left/right up to 120 °
• Negative-tilt keyboard tray adjustable (0 to -10 degrees)
• Integrated cable management system can be configured on either side     Easy-to-clean exterior
Shipping Dimensions: 39.5"x16"x10.75" (1000 x 406 x 273 mm)  Shipping weight: 35.5 lbs (16.1 kg)
Warranty: Five (5) years
    Data on 60-609-216 (pdf file, opens in new tab)

60-609-216  StyleView Vertical Lift 12”-24” displays StyleView Vertical Lift - Patient Room,
includes slide-out panning keyboard tray, mouse pad (built into the keyboard tray) wrist rest, mouse pouch & cable management, white only     $$$$
(previously  60-594-216)

CPU holder is required and sold separately (97-468-202 above).

 

StyleView Vertical Lift (VL) Enclosure for 12”-22” displays

60-595-062 StyleView VL Enclosure
Secure, complete, compact workstation. Perfect for space-constrained patient rooms, the low profile vertical lift provides 9" (23 cm) of smooth height adjustment and folds into a slim, compact unit when not in use. Its keyless locking mechanism protects patient data for compliance with privacy requirements.

The slide-out, negative-tilt keyboard tray enhances user comfort, and the panning capability of the monitor and keyboard promotes patient-caregiver interaction. A unique cable management system conceals and organizes cords, making cleaning a snap!

• Secure Equipment and Patient Data
• Keyless locking mechanism protects patient data
      and aids in the compliance with privacy requirements like HIPAA
• Separate locking storage for CPU
• Premium Ergonomics
• Nine-inch (229 mm) vertical adjustment of monitor and keyboard in tandem
      enhances ergonomics for multiple users
• Slide-out keyboard tray extends an extra 5" (125 mm) and pans for comfortable data entry
• Ergonomic negative-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry
• Patented counterbalance system provides smooth adjustment
      while maintaining touch-screen stability
• Low profile—only 6.75" (17.2 cm) deep—and narrow width
      make it perfect for space-constrained areas
• Easy to use: Quick, simple 4-step installation and effortless operation
• Advanced open-architecture design supports future hardware upgrades
• Cable management system conceals and organizes wires and cords
• Extremely easy to clean; promotes infection control
• Attractive design; hides clutter associated with computer equipment

LCD Size: 22",   Capacity: * 3.6-14.9 kg,   Lift: 22.9 cm,  Tilt: — ,  Pan: 10°†,  Rotation: —,  VESA: MIS-D

       

Includes wall plate, mounting template, enclosure, vertical lift, slide-out keyboard tray, wrist rest, mouse pouch, scanner holder, internal cable management, batteries, monitor mounting hardware, wall mounting hardware, keys

Easy 4-step installation:
      1. Attach wall plate using template; 2. Hang enclosure; 3. Install computer; 4. Set keyless security code
* Listed weight capacity represents total load on Vertical Lift engine, including the monitor and contents of keyboard tray, mouse pouch and scanner holder.

Maximum load capacity: monitor pivot = 18 lbs (8.2 kg); CPU compartment = 20 lbs ( 9.1 kg); door/worksurface = 50 lbs (22.6 kg)
† Monitor pans left/right ±5° (based on typical 17" monitor; will vary with monitor size)

• Nine inches (229 mm) of vertical adjustment ergonomically accommodates user heights ranging from the female height to the average male height
• Slide-out mouse tray includes built-in pad surface
• Negative-tilt keyboard tray is adjustable 0° to -10°; folds up flat when stored
• Keyboard tray pans left/right up to 120°
• Integrated mouse and scanner holders
• Cable access openings allow cables to pass through top and bottom of enclosure
• CPU compartment is top-vented for maximum CPU heat dissipation
• Open-back design allows wall outlets and other ports to be contained within boundary of enclosure
• Accommodates most small form factor and ultra small form factor CPUs
• Maximum CPU physical dimensions: 13.75" W x 12.75" H x 3.75" D (34.9 x 32.4 x 9.5 cm)
• Maximum monitor physical dimensions: 20.7" W x 14.7" H x 2.75" D (52.6 x 37.3 x 7.0 cm)
• Mounting Standards: VESA FDMI, MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• VESA hole pattern should be on center on back of monitor
• Plastic/polycarbonate components are compliant with the surface flame spread
     and smoke development requirements of ASTM E-84/ NFPA 255/ UL 723
Actual Product Dimensions: 69 H x 154 H x 17 D (closed) or 53 D cm (open)
Shipping Dimensions: 65" x 31" x 11.5" (1651 x 787 x 292 mm)    Shipping Weight: 97 lbs (44.1 kg)
Warranty: Five (5) years; One (1)-year warranty on all electronic components (excludes AA batteries)

60-595-062   StyleView VL Enclosure
          Secure, complete, slim, wall-mounted workstation, white only  $$$$½

 

60-610-062StyleView Sit-Stand Enclosure for up to 22" displays

60-610-062 StyleView Sit-Stand Enclosure

Perfect for space-constrained patient rooms, this very low-profile vertical lift provides 20" (51 cm)
of smooth height adjustment and folds into a slim, compact unit when not in use. Move from a sitting to a standing position whenever you want.
Its keyless locking mechanism protects patient data for compliance with privacy requirements.
A unique cable management system conceals and organizes cords, making cleaning a snap!
Warranty: 5 Years   Data sheet (pdf file, opens in new tab)

60-610-062  StyleView Sit-Stand Enclosure (bright white)  $$$$
Includes enclosure, cable management wrap, installation template, mounting hardware  

 

StyleView HD Combo System for 24” displays

45-216-216 for 24” displays StyleView HD Combo System DISCONTINUED

StyleView HD Extender Arm for 24" displays

45-255-216  Add 18" (46 cm) StyleView HD Extender Arm to HD Combo System DISCONTINUED
to increase range of motion for even greater reach, white only  

 

StyleView Sit-Stand Combo Arm with Worksurface
45-260-026  - suitable for up to 24" displays

45-260-026 Durable polished aluminum construction!
Also features a worksurface with pull-out keyboard tray, which facilitates caregiver workflow.
Holds a monitor, bar-code scanner, keyboard, wrist rest and mouse on the same arm, providing easy, single-motion height adjustment.
Work sitting or standing with the arm's ergonomic 25" (64 cm) LCD height adjustment range.
A unique cable management system conceals and organizes cords, making cleaning easy.
Warranty: 5 Years  
  Data on Ergotron 45-260-026  45-266-026  45-261-026
      (pdf file, opens in new tab)

45-260-026   StyleView Sit-Stand Combo Arm with Worksurface (polished aluminum).
Includes Combo Arm, wall mount bracket, track mount bracket kit, height-adjustable LCD mount, wrist rest,
scanner and mouse holder, worksurface with integrated keyboard tray,
VESA monitor mounting kit, cable ties.     $$$$

 

StyleView Sit-Stand Combo Arm without Worksurface
45-266-026        - suitable for up to 24" displays

Durable polished aluminum construction! Holds a
monitor, bar-code scanner, keyboard, wrist rest and mouse on the same arm, providing easy, singlemotion height adjustment. Work sitting or standing with the arm's ergonomic 25" (64 cm) LCD height adjustment range.
A unique cable management system conceals and organizes cords, making cleaning easy.
Warranty: 5 Years  
      Data on Ergotron 45-260-026  45-266-026  45-261-026 (pdf file, opens in new tab)

45-266-026   StyleView Sit-Stand Combo Arm (polished aluminum).
Includes Combo Arm, wall mount bracket, track mount bracket kit, height-adjustable LCD mount,
wrist rest, scanner and mouse holder, integrated keyboard tray with left/right mouse tray,
handle, VESA monitor mounting kit, cable ties.         $$$
 

45-261-026StyleView Sit-Stand Combo Extender
    - increase reach by 17"

Add an extender to your SV Combo Arm and increase its reach by 17" (43 cm). See No 8 in the picture.
• Adds a third pivot-point for more adjustment flexibility
• Clean and integrated cable management conceals cables
• Easy-to-clean design provides infection control
Warranty: 5 Years  
  Data on Ergotron 45-260-026  45-266-026  45-261-026
          (pdf file, opens in new tab)

Only compatible with 45-260-026, 45-266-026, 45-270-026, 45-271-026, 45-272-026, 45-273-026 Sit-Stand Combo Arms

45-261-026   SV Sit-Stand Combo Extender (polished aluminum).
Includes Extender, pivot covers, Wall Track mounting brackets.
Replaces Vertical Mount Base when installed.    $


 

StyleView Sit-Stand Combo System w/Worksurface
        - suitable for up to 24" displays

45-270-026This complete system provides easy repositioning of your entire workstation—move your display, keyboard, mouse and barcode scanner in a single motion!
Durable polished aluminum construction!
Also features a worksurface with pull-out keyboard tray, which facilitates caregiver workflow.
Work sitting or standing with the arm's ergonomic 25" (64 cm)
LCD height adjustment range. A unique cable management system conceals and organizes cords, making cleaning easy. (Medium Silver or Small Black CPU Holder).
Warranty: 5 Years
  Data on Ergotron 45-260-026  45-266-026  45-261-026 (includes 45-270-026)
          (pdf file, opens in new tab)

45-270-026   StyleView Sit-Stand Combo System with Worksurface and Medium Silver CPU Holder (polished aluminum). Includes HD Combo Arm, 34" Wall Track with (2) black track covers,
Medium Silver CPU Holder, CPU spacer, (2) 10" cable channels,
CPU and Arm track mount bracket kits, Wall Track fasteners for concrete and wood,
CPU direct wall mount kit, height-adjustable LCD mount, wrist rest, scanner and mouse holders,
integrated keyboard tray, handle, VESA monitor mounting kit, cable ties.    $$$$

45-272-026  StyleView Sit-Stand Combo System with Worksurface and Small Black CPU Holder (polished aluminum).
Includes HD Combo Arm, 34" Wall Track with (2) black track covers, Small Black CPU Holder,
CPU spacer, (2) 10" cable channels, CPU and Arm track mount bracket kits,
Wall Track fasteners for concrete and wood, CPU direct wall mount kit, height-adjustable LCD mount,
wrist rest, scanner and mouse holders,
integrated keyboard tray with left/right mouse tray, handle, VESA monitor mounting kit, cable ties.    $$$$
  Data on Ergotron 45-260-026  45-266-026  45-261-026 (includes 45-272-026)
          (pdf file, opens in new tab)

 

LX Wall Mount System   for up to 24" displays

45-247-026 LX Wall Mount System
Durable polished aluminum construction! This is a complete solution that accommodates an LCD, keyboard and CPU while providing vertical and side-to-side motion. It is perfect for space-constrained areas: simply fold the keyboard and LCD tight against the wall when not in use.

Articulating arms feature full tilt/pan capability and 13" (33 cm) height adjustment, providing premium ergonomic adjustment
Extends LCD up to 25" (64 cm); keyboard tray extends up to 35" (89 cm); push your display and keyboard out of the way when not in use
Ideal for space-constrained rooms—keyboard folds to within 3.5" (9 cm) of wall in storage position. LCD arm folds back to a depth of 5.3" (13 cm)
Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Creates a complete and compact workstation
Effortlessly and independently position the LCD and keyboard to the most comfortable viewing and typing position, all while maintaining eye contact with your patient
Convenient bi-focal viewing: Screen lowers and positions for optimized viewing by users with bi-focal glasses

LCD Size: 24",  Capacity: 20 lbs* 9.1 kg,  Lift: 13" 33 cm,  Tilt: 85°,  Pan: 360°, Rotation: 360° Portrait/Landscape, VESA: MIS-D

Includes: 10" and 34" Wall Tracks with (2) black track covers, LX Wall Mount LCD Arm, LX Keyboard Arm, wrist rest, mouse pad, mouse holder, CPU Holder, two (2) 10" Cable Channels, mounting kits for hollow-wall and wall-stud installation
Improved LX Arm Features & Benefits
Polished aluminum construction offers greater durability and enhanced aesthetics

Snap-fit cap secures interface of arms to extensions for greater stability

* Weight Capacity: display = 7–20 lbs (3.2–9.1 kg); keyboard = 5 lbs (2.2 kg); CPU = 40 lbs (18 kg)
Monitor depth may affect weight capacity. Read more
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
CPU Size Range: 2" to 8" (5 to 20 cm) wide;
     includes plastic spacer to accommodate most small form factor and ultra small form factor CPUs
CPU Holder includes theft deterrent anchor holes for cable locks and fasteners for locking the holder’s width
Base includes theft deterrent anchor holes for cable locks
Shipping Dimensions: 37" x 22 " x 7.5" (94 x 56 x 19 cm)     Shipping Weight: 40 lbs (18 kg)
Warranty: Five (5) years
    Data sheet on 45-247-026 (pdf file, opens in new tab)

45-247-026   LX Wall Mount System, [includes: 10” and 34” Wall Tracks with (2) black track covers,
LX Wall Mount LCD Arm, LX Keyboard Arm, wrist rest, mouse pad, mouse holder,
CPU Holder, two (2) 10” Cable Channels, mounting kits for hollow-wall and wall-stud
installation], durable polished aluminium construction   $$$$


Large screen Wall Mounts

 

TM Tilting Wall Mount XL, for 42"- 65" displays

60-601-003   TM Tilting Wall Mount XL, CF, integrated security fasteners, silver.
Weight limit: 79kg max. , for 42"- 65" displays
The XL version provides extra width to handle larger displays that use
mounting-hole patterns up to 800 mm wide. See more description above.
Warranty: 5 Years
    Data sheet (pdf file, same as next above, opens in new tab)
60-601-003   TM Tilting Wall Mount XL:  $

 

WM Low Profile Wall Mount for 32"- 65" displays

60-604-003 WM   Low Profile Wall Mount,
for 32"–65" displays
extremely slim profile—just over an inch from the wall
plus integrated security fasteners, silver. Weight limit: 79kg max    $

The WM's wall-hugging design hangs your large flat panel display just over an inch from
the wall for an extremely slim profile.
Yet this TV wall mount costs about half that of competing models.
Engineered to install in three easy steps, the WM is sturdy and stable.
(The "XL" version provides the extra width to handle larger displays that use mounting-hole patterns up to 800 mm wide).
Warranty: 5 Years    Data Sheet on 60-604-003 (pdf file, opens in new tab)

60-602-003   WM   Low Profile Wall Mount, XL
for 42"–65" displays
(The XL version provides extra width to handle larger displays
that use mounting-hole patterns up to 800 mm wide), 79 kg weight capacity.    $
Warranty: 5 Years      Data Sheet on 60-602-003 (pdf file, same as next above, opens in new tab)

 

45-195-194 Neo-Flex HD Wall Mount Pivot,                     replaced by 45-269-009 below
CF, flexible alternative to rigid wall mounts for displays.  Weight limit: 22.7kg max

45-194-194 Neo-Flex HD Wall Mount Swing Arm, CF,   -  replaced by 45-268-026 below
    flexible alternative to rigid wall mounts for displays

LX HD Wall Mount Swing Arm, Polished   for up to 42" displays

45-268-026Suitable for up to 42" displays

The perfect TV wall mount: This arm offers a flexible alternative to rigid wall mounts for displays weighing up to 50 lbs (23 kg).
Embedded CF technology enables effortless screen adjustment for optimal viewing comfort.
weight capacity: 22.7 kg
Warranty: 3 Years
    Data sheet on 45-268-026 (pdf file, opens in new tab)

45-268-026 (previously 45-194-194)   LX HD Wall Mount Swing Arm, Polished  $
LX HD Wall Mount Swing Arm (polished aluminum).
Includes hardware for mounting to wood stud or concrete wall.

45-269-009LX HD Wall Mount Pivot

Suitable for up to 42" displays

The perfect TV wall mount: This pivot offers a flexible alternative to rigid wall mounts
for displays weighing up to 50 lbs (23 kg).
Embedded CF technology enables effortless screen adjustment for optimal viewing comfort.

Rock-solid construction secures your display investment
Effortless adjustment for premium viewing
Easy three-step installation
Pleasing aesthetics make it perfect for the home or office
Integrated tilt lock-down feature

Ergo_45-269-009 on wallMounting Options: Attaches directly to sturdy vertical surfaces.
Includes hardware for mounting to wood stud or concrete wall
Includes knob on pivot to lock position of tilt.
Display depth greater than 4" (10 cm) may diminish capacity
UL Compliant: Has been tested to four times its maximum weight capacity
        as per UL Standard 1678 (do NOT exceed 50 lbs in actual use)
* Mounting Standards: VESA MIS-D, 75/100 (hole pattern = 100 x 100 mm & 75 x 75 mm), MIS-E (hole pattern = 200 x 100 mm), MIS-F (hole pattern = 200 x 200 mm ONLY). Optional VESA Bracket Adaptor Kit (97-759) can be ordered separately for MIS-F interface with hole pattern = 400 x 200 mm
Warranty: 5 Years

45-269-009 LX HD Wall Mount Pivot (black), 23kg weight capacity.  $

 


SIM-90 Signage Integration Mount
for 32" and above LCD Displays - also mounts small computer

60-600-009  SIM 90 Signage Integration Mount
Introducing the new SIM90 from Ergotron, a fully integrated, all-in-one wall mounting system
includes all components for installing large display digital signage solutions;
one box, one part number — everything you need including VESA-compliant thin client CPU holder, portrait-to-landscape pivot and fasteners.

32" and above diagonal, up to 47.6kg (+3.5kg for computer, +1.4kg for cables & power brick),   
Tilt: 0° - 15° forward,    Rotation: 90°;   Vesa: MIS-F,   Lift & Pan: not applicable,

Mounting Hole Patterns: Horizontal measurement = 200 mm, 300 mm, 400 mm, 440 mm, 500 mm or 600 mm.
Vertical measurement = 200 mm or 225 mm–400 mm.
With optional 800 mm Accessory Kit (97-489, ordered separately), horizontal measurement can be expanded to 800 mm or 660 mm

Includes wall and display brackets, quick-release VESA-CPU mount/power brick bracket, hardware fastener kit.

Easily attaches VESA-compliant (75/100 mm) thin client CPU: CPU must have either 75 x 75 mm or 100 x 100 mm mounting holes on one side
Maximum CPU size (W x H x D) = 13.5" x 10" x 2.6" (34.3 x 25.4 x 6.6 cm), up to 7 lbs (3.2 kg).
    Power brick maximum weight = 3 lbs (1.4 kg). Can also hold smaller DVD players or wireless extenders that are VESA compatible
Mounting Options: Includes hardware for mounting to wood studs (16" centered studs) or concrete wall surfaces
Includes screws to secure display for theft deterrence
Display can be positioned at different points on the wall bracket; this lateral shift of the display’s position relative to the wall studs can be as much as 5.7" (14.5 cm)
Profile off the wall: 4.8" (12 cm)
Note: Portrait orientation is not recommended for some plasma displays. Contact display manufacturer if you have questions regarding your plasma’s portrait-mode capability (this is not an issue with LCD technology)
Shipping Dimensions: 13.25"W x 12"H x 28.5"D (33.7 x 30.5 x 72.4 cm)     Shipping Weight: 24 lbs (11 kg)
Warranty: Five (5) years     Data sheet on SIM-90 (.pdf, 2 pages)

60-600-009  SIM 90 Signage Integration Mount:   $$

 

60-613 Neo-Flex Tilting Wall Mount, VHD/UHD

VHD: Suitable for 23"–42" displays    UHD: Suitable for 37"–63" displays

VHD: Fits most 23"–42" flat panels up to 80 lbs (36.3 kg) and is ideal for those looking for an easy-to-use medium tilt mount.
UHD: Fits most 37"–63" flat panels up to 175 lbs (79 kg) and is the ideal mount for those looking for an easy-to-use large tilt mount.
Warranty: 3 Years

60-613   Neo-Flex Tilting Wall Mount, VHD, Very Heavy Duty (black)    $
60-612   Neo-Flex Tilting Wall Mount, UHD, Ultra Heavy Duty (black)   $ 

 

Neo-Flex Wall Mount, VHD/UHD/ULD

VHD: 23"–42" displays      UHD: 37"–63" displays / UHD: 13"–32" displays      Looks similar to above, but without the tilt.

60-615VHD: Fits most 23"–42" flat panels up to 80 lbs (36.3 kg) and is ideal for those looking for
an easy-to-use medium fixed mount.
UHD: Fits most 37"–63" flat panels up to 175 lbs (79.4 kg) and is ideal for those looking for
an easy-to-use large fixed mount.

ULD: Fits most 13"–32" flat panels up to 40 lbs (18.1 kg) and is ideal for those looking for
an easy-to-use small fixed mount.
Warranty: 3 Years

60-615   Neo-Flex Wall Mount, VHD, Very Heavy Duty (black)   $
60-614   Neo-Flex Wall Mount, UHD, Ultra Heavy Duty (black)   $

 

97-58997-589 Neo-Flex Wall Mount, ULD, Ultra Light Duty

• Low 0.5" (13 mm) mounting profile.
• Lift and Lock allows you to easily attach your flat panel to the mount.
• Locking bar secures panel to mount.
• Simple to install and use.
• Includes complete hardware Kit.

VESA Monitor Attachment: 75 x 75 mm, 100 x 100 mm,
200 x 100 mm,     100 x 200 mm   or   200 x 200 mm
Profile off the Wall:  0.5" (13 mm)

    Installation manual & diagrams (pdf file, opens in new tab or window)

Note:  * UL certified and listed to UL Standard 1678. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)

97-589   Neo-Flex Wall Mount, ULD, Ultra Light Duty (black)     $

 

    Digital Signage Brochure 2012 (pdf file, 6MB, opens in new tab)

 

60-617TM Cantilever, VHD/UHD - DISCONTINUED

VHD: Suitable for 23"–42" displays        UHD: Suitable for 37"–55" displays

VHD: This low-profile cantilever mount fits most 23"–42" flat panels up to 100 lbs (45.4 kg) and is
well-suited for those applications where seamless integration counts most.
UHD: This low-profile cantilever mount fits most 37"–55" flat panels up to 150 lbs (68.1 kg) and is
well-suited for those applications where seamless integration counts most.
Warranty: 5 Years

60-617  TM Cantilever Wall Mount, VHD, Very Heavy Duty (black), 45 kg max. 
60-616  TM Cantilever Wall Mount, UHD, Ultra Heavy Duty (black), 68 kg max. 

 

Neo-Flex Cantilever, VHD/UHD

VHD: Suitable for 23"–42" displays     UHD: Suitable for 37"–52" displays

VHD: This low-profile cantilever mount fits most 23"–42" flat panels up to 80 lbs (36.3 kg)
and is well-suited for those applications where seamless integration counts most.

60-619UHD: This low-profile cantilever mount fits most 37"–52" flat panels up to 125 lbs (57 kg)
and is well-suited for those applications where seamless integration counts most.
Warranty: 3 Years

60-619  Neo-Flex Cantilever Wall Mount, UHD, Ultra Heavy Duty (black),
              56 kg weight capacity    

60-621

Ceiling Mounts

      Digital Signage Brochure which includes ceiling mounts 2012 (pdf file, opens in new tab)

Neo-Flex Ceiling Mount for Single Large Display,
      for 37"–70" displays

Will be replaced by a new version by end of 2Q12.
A sturdy single flat panel ceiling mount, with universal adapter, that's ideal for any ceiling
application—whether TV viewing or digital signage.
Warranty: 3 Years
Neo-Flex Ceiling Mount Suitable for 37"–70" displays     7/12

60-621 Neo-Flex Ceiling Mount for Single Large Display (black), 90 kg weight cap.

 

Neo-Flex Ceiling Mount, Double back to back, for 37"–70" displays

Will be replaced by a new version by end of 2Q12.
A sturdy double flat panel ceiling mount with universal adapters, that allows flat panels
or digital signage to be seen from multiple locations.
Warranty: 3 Years

60-622 Neo-Flex Ceiling Mount for Two Large Displays back to back (black), 182 kg weight capacity  

      Digital Signage Brochure which includes ceiling mounts 2012 (pdf file, opens in new tab)

 

60-623Neo-Flex Projector Ceiling Mount, for projectors

A streamlined, fully adjustable projector mount with multiple user-friendly features. It has infinitely adjustable tilt and pitch, which are especially helpful for post installation adjustment.
Warranty: 3 Years

60-623

60-623   Neo-Flex Projector Ceiling Mount (black), 18 kg weight capacity    $

 

Neo-Flex Short Throw Projector Arm

Neo-Flex Short Throw Projector Arm

Coming Soon

TBC Neo-Flex Short Throw Projector Arm (black), 15 kg weight capacity    $

 



Brochure Download

Download Ergotron Catalog 2015 (pdf file, 48 pages, 4MB, opens in new tab)

General brochure about Sit-Stand - Office Furniture
                (pdf file, 11MB, opens in new tab)

The Adjustable Office - Join the Movement! (pdf file, 1MB, opens in new tab)

 

Note:
  The catalog contains some items which are not available in Australia

 

Ergotron Catalog "Positioning your digital world" June 2013  

pdf file, 48 pages, incl Desk & Wall Mounts, Workstations and Mounting Carts  6/13

 

   Ergotron brochure download page or here (Ergotron site)


Accessories

Accessories - Ergonomic Mounting & Mobility

31-016-182 Wall Track 10"L x 5"W   $
31-017-182 Wall Track 26"L x 5"W $
31-018-182 Wall Track 34"L x 5"W $

45-289-026 LX Extension Arm, 9" Etension, Stiffened, Polished Aluminium $

50-193-200 Keyboard Tray for LX Arms $

60-590 Power Strip Mounting Kit for Ergotron Carts.
        Includes two (2) cable-winding brackets, strain-relief clip, two (2) t-slot brackets. $

80-105-064 Universal CPU Holder $
80-106-085 Universal Tablet Cradle $

97-091 Track Mount Bracket Kit for Arms, Pivots and Universal CPU Holder $
97-101-003 Wall Plate $
97-462-062 SV31 PHD Single Drawer $
97-468-202 Vertical Universal CPU Holder (silver).
          Includes CPU holder, spacer, bumpers, wall mount fasteners, security nuts and bolts. $

97-480-003 CPU Holder for SV31/32 Carts. Includes CPU holder, mounting hardware, security fasteners. $
97-488-055 Basket and Handle Kit (two-tone grey). Includes handle, basket, mounting hardware. $
97-489          MMC 800 mm Extension Kit (black). Includes two (2) extension brackets, fasteners. $
97-491-085  MMC Camera Shelf Kit (black). Includes camera shelf, riser brackets, fasteners, Velcro. $

97-500-055 Wide View Camera Shelf Kit, Graphite Gray $

97-540-053 Teachwell Large Utility Shelf $
97-543-207 Kit, Scanner Holder, Metric, Medium Grey
97-544     NFCart, wire frame basket, Accessory $
97-545     NFCart, Molded basket Accessory $
97-546     NFCart, Laptop vertical mounting $

WorkFit-S
97-558-200 Tablet/Document Holder for WorkFit-S Workstation (black).
                   Includes document holder, handle, mounting hardware. $
97-574     Bow Kit for Dual SV $


97-582-009 Neo-Flex Underdesk Keyboard Arm (black) $
97-583-009 Hinged Bow for WorkFit-S.   $
                Provides the ability to pivot one display back so others can easily see your screen.
                Also allows two 24-inch displays to be mounted on WorkFit-S. Installs on either right or left side.

97-585 TeachWell MDW Laptop Kit $
97-586 TeachWell MDW LCD Kit $
97-589 Neo-Flex Wall Mount ULD $

97-598-055 TeachWell MDW Projector Arm $
97-608 TeachWell MDW Storage Bin $
97-609 SV32 PHD STORAGE DRAWER, ELG $$
97-612 Power Kit for Tablet Mgmt Cart,  AU/NZ $
97-615 Conversion Kit, Tall user, WorkFit-C $
97-616 Conversion Kit, Combo to Dual, WorkFit-C $
97-617 Conversion Kit, Dual to Combo, WorkFit-C $

97-620-060 WorkFit Anti-Fatigue Floor Mat   $$
97-630 Workfit-A Worksurface Accessory     $

97-649-085 Workfit-S Grommet Accessory $
97-650 SV LCD Pan Accessory $
97-651 Accessory, Wider Keyboard Tray For Microsoft KB $
97-653 Large Keyboard Tray for WorkFit-S $

97-662 WorkFit-PD LCD & Laptop Kit. $
97-663 WorkFit-PD Dual Monitor Kit. $
97-664 WorkFit-PD Single LD Monitor Kit. $
97-665 WorkFit-PD Single HD Monitor Kit. $
97-666 WorkFit-PD CPU Holder Kit. $
97-667 WorkFit-PD Cable Management Box. $

Pictures of some accessories

June 2010     Click here for a larger version of the table below (opens in new tab or window)

 

Keywords: 45-299-026  45-296-026   45-243-026   45-228-026  60-577-195  
LX Kb Arm:  45-246-026   
100 Series:  47-092-800  47-093-800;      28-514-800  60-239-007  
97-101-003  97-468-202         (items starting with 97- are accessories)

60-609-216  97-468-202  60-595-062  60-610-062   28-514-800  28-513-100 
45-260-026   45-261-026  45-266-026  45-270-026  45-272-026  45-247-026   
TM:  60-603-003  60-601-003    WM:  60-604-003   60-602-003
LX:  45-268-026  45-269-009    SIM-90: 60-600-009  

60-613  60-612  60-615  60-614  97-589  60-617  60-616  60-618  60-619      Ceiling:  60-621  60-622  60-623 

 

Computer Products

Communication Products

Measurement Products

Lab Products

 

Contact us for more info:

Phone: +61 2 9481 7420

Email: (JavaScript required)