Information about USBee products: click here dln
your hardware to a PC using the USBee LX Digital Test Pod
and get Logic Analyzer, Signal Generator, Frequency Counter and Pulse Width Modulator capabilities.
Write your own Visual Basic or C software to create your own test tools.
USBee LX is a faster version of the USBee with even more features.. Captures and
generates digital signals up to 24 million samples per second.
Provides internal and external clocking, trigger position settings (prestore), and I2C bus decoder. Frequency Counter up to 6MHz. Has 8 Digital Inputs/Outputs clock signal and external trigger. Also has dedicated power signals 3.3V and 5V.
USBee LX Specification
your hardware to a PC using the USBee Digital Test Pod and get Logic Analyzer,
Signal Generator, Frequency Counter Remote Controller, Data Logger and Pulse Width
Write your own Visual Basic software to create your own test tools.
Captures and generates digital signals up to 3 million
samples per second. Frequency Counter up to 3MHz. 8 Digital Inputs/Outputs plus
a clock signal.
Complete design details for
making your own USB device.
Includes schematics, PCB layouts, Bill of materials and software interface details necessary to get you from concept to prototype within 24 hours.
All of the USBee Digital Test pod software
(Logic Analyzer, Signal Generator, Frequency Counter, Pulse Width Modulator) will
work with your final completed USB device, including any USBee Toolbuilder software
you create. Does not support USBee LX.
USBee Design Guide Details
A complete set of 14
additional Test Clips.
Each clip attaches to a USBee or USBee LX signal wire and connects to either surface mount or DIP components
A complete set of 14 test leads for the USBee or USBee LX Digital Test Pod. Each lead plugs into the USBee pod and is 9 inches long.
This cable connects your USBee or USBee LX Test Pod to your PC through the USB port on your computer. Cable Length is 6 feet long. USB A to Mini-B cable.