At ESIS, we are offering our Ready2Run Configure & Test Service free this month with every purchase of an industrial PC, panel PC, serial modem or CYCON SMS controller.*
The lead-up to Christmas is always a race to get projects finished, commissioned and signed off before shutdown periods and staff leave. Extra site visits, waiting on support calls or troubleshooting a configuration that should have been set up correctly from the start are the last things you want to deal with in November and December!
Our Ready2Run service is ideal for time-pressured projects. We prepare your device so it’s ready to use straight out of the box. The service normally adds up to 30 minutes of ESIS technician time per device, which can save you hours on solving problems once the equipment lands on site.
How it works for industrial PCs, fanless PCs and panel PCs
We’ll configure the system so it’s ready to operate reliably on day one:
- BIOS configured for your environment, including thermal profile.
- Auto power-on after power failure enabled.
- Documentation of the settings applied.
- First boot validation test to confirm smooth startup and stability.
- Plus if you order the system with Windows 10/11 pre-installed, we’ll also install drivers, run all the latest updates, and test the PC for you.
This reduces the risk of communication failures, overheating, field lock-ups and on-site configuration time.
Setting up serial modems for SMS alerts
We’ll preconfigure the modem specifically for your application:
- Setup to accept standard AT commands over the serial port for SMS send/receive.
- Serial port settings configured (baud rate, parity, stop bits).
- APN pre-configured based on the SIM you intend to use.
- No more wasted setup time or troubleshooting communication issues.
Getting CYCON-1280 SMS controllers running
We’ll set up the essentials so it can start sending alerts immediately:
- Phone numbers pre-loaded.
- Alarm messages and title configured as per your instructions.
- System test to make sure the device works correctly.
This ensures your alarm notifications work right out of the box.
Why we’re offering this free in November
We know the weeks leading up to Christmas are the busiest period for commissioning, factory acceptance testing, and urgent project close-outs. Providing pre-configured, validated devices helps:
- Reduce engineering and commissioning time.
- Minimise on-site troubleshooting.
- Get equipment installed faster with fewer delays.
- Ensure the project can be signed off before the holiday period.
This is a small service that makes a big difference to project delivery when everyone is racing the clock.
Is our Ready2Run service right for you?
Are you a:
- Project manager wanting smooth handovers before the break?
- System integrator or engineer wanting “ready to go” units?
- Field technician who don’t want to configure devices on-site in a hurry?
- Utility and infrastructure operator / contractor working to pre-Christmas deadlines?
If you’re purchasing industrial PCs, panel PCs, or SMS alerting equipment before Christmas, take advantage of ESIS’ free pre-configuration this month and save time and stress!
How to redeem the offer
Simply mention “Free Ready2Run – November Offer” when you place your order before 30 November 2025. We’ll ask you a few questions to pinpoint what configuration is required, and carry out the work before dispatching your systems.
If you’d like an even more detailed configuration tailored to your specific needs, our team is also ready to assist with additional configuration and testing services.
* Offer applies to full priced industrial PCs, fanless PCs, panel PCs, serial SMS modems, and CYCON-1280 SMS Controllers purchased and paid for before 30 November 2025. Customer must answer a few questions about the required configuration before we can perform the work.
